Wykres commitów

1428 Commity (c7923b113905b3a2b4f51aa4bde017c42453cf7f)

Autor SHA1 Wiadomość Data
Damien George c7923b1139 stm32: Add support for USB on G0 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-22 16:38:03 +11:00
Damien George 051e2900d9 stm32/boards/NUCLEO_H723ZG: Add new H723 board.
The following have been tested and are working:
- 550MHz CPU frequency
- UART REPL via ST-Link
- USB REPL and mass storage
- 3x LEDs and 1x user button
- Ethernet

Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:05:59 +11:00
Damien George d995c01042 stm32/boards: Add ld and af.csv for H723.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:02:49 +11:00
Damien George 13fcd8440e stm32: Add support for STM32H723 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:02:49 +11:00
Damien George 3187e4c7e7 stm32/mphalport: Update HAL version to 1.11.0 to match stm32lib.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-21 14:02:49 +11:00
Damien George 42511b5291 stm32/boards/NUCLEO_H743ZI2: Fix MCU tag in board.json file.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-20 15:24:45 +11:00
iabdalkader a197823eb7 ports: Fix MCU tags in Arduino board.json files. 2023-03-20 15:22:24 +11:00
Christian Clauss 4376c969f6 all: Fix Python comparison to None and True, and use "not in".
These are basic PEP8 recommendations.
2023-03-10 13:32:24 +11:00
Damien George b3c8ab37ec py/gc: Make gc_dump_info/gc_dump_alloc_table take a printer as argument.
So that callers can redirect the output if needed.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-10 10:58:10 +11:00
Damien George b336b6bb74 stm32/pybthread: Make pyb_thread_dump take a printer as its argument.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 13:20:59 +11:00
Damien George 067c7cd9dc stm32/pin: Make pin_find debug output use mp_printf.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 13:20:59 +11:00
Damien George f43c4dfc68 stm32/extint: Make ExtInt.regs print using mp_printf.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 13:20:59 +11:00
Damien George f6a35f76af stm32/modmachine: Make machine.info print using mp_printf.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 13:20:59 +11:00
Damien George 6c8b19c7e2 stm32/spi: Return error code and raise exception if SPI init fails.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 12:47:45 +11:00
Damien George 98937dcfc2 stm32/i2c: Return error code and raise exception if I2C init fails.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 12:47:45 +11:00
Damien George b981e37ccd stm32/main: Use mp_printf instead of printf for MPY start-up messages.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 12:47:45 +11:00
Damien George b9dad0add2 stm32: Remove commented-out printf's and debugging code.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-09 12:47:45 +11:00
iabdalkader 8307046406 stm32/boards: Include "senml" in manifest for ARDUINO boards. 2023-03-09 10:37:06 +11:00
Damien George a234aa44f3 stm32/powerctrl: Don't compile WB helpers on WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-08 23:57:53 +11:00
Damien George 8b3f1d47a6 stm32/powerctrlboot: Provide custom SystemInit for WB55.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Signed-off-by: Damien George <damien@micropython.org>
2023-03-08 14:04:14 +11:00
Andrew Leech c551723914 stm32/powerctrl: Disable WB55 BLE before entering deepsleep.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
2023-03-08 14:03:36 +11:00
Andrew Leech 2eca86e8fa stm32/powerctrl: Add sleep RCC semaphore management for WB55 MCUs.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
2023-03-08 11:33:00 +11:00
iabdalkader e764bf0138 stm32/cyw43_configport: Add cyw43_sdio_enable_high_speed_4bit function.
Needed by the latest version of cyw43-driver.
2023-03-08 00:59:36 +11:00
iabdalkader 40a49f5a7a stm32/boards/ARDUINO_GIGA: Add support for Arduino Giga H7 board. 2023-03-08 00:55:51 +11:00
iabdalkader b6904cba76 stm32/boards/ARDUINO_NICLA_VISION: Add support for Arduino Nicla Vision. 2023-03-08 00:55:38 +11:00
iabdalkader 449be91e1a stm32/Makefile: Include HAL HSEM driver on H747 MCUs. 2023-03-08 00:55:01 +11:00
iabdalkader d18de7ec81 stm32/boards/ARDUINO_PORTENTA_H7: Update board config files.
Changes are:
- Freeze micropython-lib time module to get strftime.
- Reserve the last 1MB of QSPI flash for (optional) WiFi firmware storage.
- Disable SD card mount on boot.
- Enable high-speed BLE firmware download.
2023-03-08 00:51:33 +11:00
iabdalkader 0f92954eee stm32/cyw43_configport: Allow boards to override default resource files. 2023-03-02 22:44:29 +11:00
iabdalkader e98d7ec804 stm32/boards/PYBD_SF2: Set CYW43 Bluetooth fimrware download baudrate. 2023-03-02 22:30:31 +11:00
iabdalkader 4937174b43 stm32/cyw43_configport: Fix build for boards without an RF switch.
Check if an RF switch is enabled before defining the RF switch pin.
2023-03-01 10:05:04 +11:00
Jim Mussared 7d40317a4a stm32: Add a default implementation of pyb.country.
This is for boards without networking support so that the default boot.py
continues to work.

Also update boot.py to use network.country and network.hostname instead.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:28:12 +11:00
Damien George 593375aa5d stm32/boards: Update linker scripts now that big_const is gone.
Signed-off-by: Damien George <damien@micropython.org>
2023-03-01 01:27:51 +11:00
Jim Mussared bad0098a49 stm32: Update to use the open-source lib version of cyw43-driver.
This removes the previous WiFi driver from drivers/cyw43 (but leaves behind
the BT driver), and makes the stm32 port (i.e. PYBD and Portenta) use the
new "lib/cyw43-driver" open-source driver already in use by the rp2 port.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:27:12 +11:00
Jim Mussared a377302623 extmod/modnetwork: Add network.hostname() and network.country().
This provides a standard interface to setting the global networking config
for all interfaces and interface types.

For ports that already use either a static hostname (mimxrt, rp2) they will
now use the configured value. The default is configured by the port
(or optionally the board).

For interfaces that previously supported .config(hostname), this is still
supported but now implemented using the global network.hostname.

Similarly, pyb.country and rp2.country are now deprecated, but the methods
still exist (and forward to network.hostname).

Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected
by this commit.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:26:17 +11:00
Damien George 8d9a7fd228 stm32/Makefile: Clean up nested if-else to chained if-else-if.
Makefile's support "else ifdef", so use it to make the logic clearer.

Also dedent some associated lines for consistency.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 10:14:04 +11:00
Jim Mussared 69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
robert-hh de1f1dd164 shared/runtime/softtimer: Use consistently the same clock source.
Before, both uwTick and mp_hal_ticks_ms() were used as clock source.  That
assumes, that these two are synchronous and start with the same value,
which may be not the case for all ports.  If the lag between uwTick and
mp_hal_ticks_ms() is larger than the timer interval, the timer would either
rush up until the times are synchronous, or not start until uwTick wraps
over.

As suggested by @dpgeorge, MICROPY_SOFT_TIMER_TICKS_MS is now used in
softtimer.c, which has to be defined in a port's mpconfigport.h with
the variable that holds the SysTick counter.

Note that it's not possible to switch everything in softtimer.c to use
mp_hal_ticks_ms() because the logic in SysTick_Handler that schedules
soft_timer_handler() uses (eg on mimxrt) the uwTick variable directly
(named systick_ms there), and mp_hal_ticks_ms() uses a different source
timer.  Thus it is made fully configurable.
2023-02-16 12:59:48 +11:00
Jim Mussared 4eb72b34df stm32/boards/ARDUINO_PORTENTA_H7: Use default aioble.
The default now includes all sub-components (security, l2cap, etc)
and using the kwarg options is no longer supported.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-16 12:32:03 +11:00
iabdalkader e140c7d26a stm32/boards/ARDUINO_PORTENTA_H7: Fix macro value check for QSPI.
QSPI deepsleep should be enabled only when the internal flash storage is
not used.
2023-02-16 12:21:48 +11:00
Andrew Leech 75e7e7d034 stm32/boards/STM32F769DISC: Fix building with USE_QSPI_XIP=1.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-16 12:04:29 +11:00
Jim Mussared 8b27482692 top: Update Python formatting to black "2023 stable style".
See https://black.readthedocs.io/en/stable/the_black_code_style/index.html

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-02 12:51:03 +11:00
Damien George fe2a8332ff stm32/boards/NUCLEO_H743ZI2: Refer to NUCLEO_H743ZI for frozen manifest.
Fixes build issue introduced by 6250337c9c

Signed-off-by: Damien George <damien@micropython.org>
2023-02-01 23:22:18 +11:00
Jim Mussared 6250337c9c ports: Make all network-capable boards use bundle-networking.
This will ensure that any board with networking support gets:
 - webrepl
 - mip
 - urequests
 - ntptime

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-01 12:42:06 +11:00
David Lechner 3446d440f6 shared/runtime/gchelper: Drop cpu directive from ARM asm helpers.
This drops the `.cpu` directive from the ARM gchelper_*.s files.  Having
this directive breaks the linker when targeting older CPUs (e.g. `-mthumb
-mthumb-interwork` for `-mcpu=arm7tdmi`).  The actual target CPU should be
determined by the compiler options.

The exact CPU doesn't actually matter, but rather the supported assembly
instruction set.  So the files are renamed to *_thumb1.s and *thumb2.s to
indicate the instruction set support instead of the CPU support.

Signed-off-by: David Lechner <david@pybricks.com>
2023-01-28 15:51:38 +11:00
iabdalkader 3b5cafc716 stm32/Makefile: Leave DFU mode after download when using dfu-util.
Not all DFU bootloaders exit after download, this modifier is required for
some boards to reset, otherwise they sit idle in DFU mode.
2023-01-19 16:23:22 +11:00
Andrew Leech fa57ee971b stm32/boards: Consolidate linker snippets to reduce duplication.
This commit uses the REGION_ALIAS GNU linker command to simplify the linker
snippets and consolidate the duplication.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-13 15:14:26 +11:00
Damien George bb77c1d5a3 stm32/powerctrl: Fix build on STM32G0xx and STM32H7Bx MCUs.
STM32G0xx doesn't have DBGMCU, and STM32H7Bx doesn't have EXTI_D2.

Signed-off-by: Damien George <damien@micropython.org>
2022-12-16 16:48:59 +11:00
Jim Mussared 5f8f32f917 extmod/modnetwork: Use a type protocol to implement NIC functions.
This was previously implemented by adding additional members to the
mp_obj_type_t defined for each NIC, which is difficult to do cleanly with
the new object type slots mechanism. The way this works is also not
supported on GCC 8.x and below.

Instead replace it with the type protocol, which is a much simpler way of
achieving the same thing.

This affects the WizNet (in non-LWIP mode) and Nina NIC drivers.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-12-15 17:40:06 +11:00
brave ulysses 7f71057a89 stm32/boards/NUCLEO_F756ZG: Add board definition for NUCLEO-F756ZG.
Signed-off-by: Damien George <damien@micropython.org>
2022-12-15 14:59:26 +11:00
iabdalkader 5b7f71882b stm32/powerctrl: Improve standby mode entry code for H7 MCUs.
Changes in this commit:
- Clear and mask D2 EXTIs.
- Set correct voltage scaling level for standby mode.
- Disable debug MCU (if debugging is disabled), for all MCU series.
2022-12-15 14:39:28 +11:00