mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
4 980 Commity
3 Gałęzie
5 Tagi
276 MiB
Wykres commitów

31 Commity (c5f52b845b62e1562ca48943f1bab03a8da99059)

Autor SHA1 Wiadomość Data
Damien George f7697ff393 stmhal: Add rtc.init() method to force RTC to re-initialise. 2015-12-04 12:05:05 +00:00
T S 86aa16bea6 stmhal: Implement delayed RTC initialization with LSI fallback. 
If RTC is already running at boot then it's left alone.  Otherwise, RTC is
started at boot but startup function returns straight away.  RTC startup
is then finished the first time it is used.  Fallback to LSI if LSE fails
to start in a certain time.

Also included:
 MICROPY_HW_CLK_LAST_FREQ
        hold pyb.freq() parameters in RTC backup reg
 MICROPY_HW_RTC_USE_US
        option to present datetime sub-seconds in microseconds
 MICROPY_HW_RTC_USE_CALOUT
        option to enable RTC calibration output

CLK_LAST_FREQ and RTC_USE_CALOUT are enabled for PYBv1.0.
 2015-11-23 23:23:07 +00:00
Dave Hylands 57e00ef262 stmhal: Fix RTC code to work on the F7 2015-11-07 09:42:26 -08:00
T S 8f7ff854b0 stmhal/rtc: LSx oscillator is only initialized upon initial power up. 
Initial power up also includes VBAT.

If LSE is configured but fails to start, LSI is used until next full power
cycle.  Also handles STM32F7xx variant.
 2015-11-06 22:00:34 +00:00
Dave Curtis 32b3549cce stmhal: Add symbolic #defines for interrupt levels in irq.h. 2015-11-01 23:23:39 +00:00
Dave Hylands 165734522e stmhal: f7: Fix recent RTC change to build on F7. 2015-10-30 23:40:00 +00:00
Peter Hinch 3819634469 stmhal: Make RTC init skip startup if LTE is already enabled and ready. 
This prevents the loss of RTC time when exiting from standby mode, since
the RTC is paused while it is being re-inited and this loses about 120ms.

Thanks to @chuckbook for the patch.
 2015-10-30 13:13:42 +00:00
Damien George 60401d461a stmhal/rtc: Fix indentation to use spaces rather than tabs. 2015-10-20 12:05:27 +01:00
Peter Hinch b106532b32 stmhal/rtc: Init uses YMD rather than backup register to detect powerup. 2015-10-20 12:05:16 +01:00
Damien George 2a8d7ee0f8 stmhal: Fix RTC.wakeup so it correctly calculates WUT for large periods. 
Thanks to Peter Hinch.  Addresses issue #1488.
 2015-10-08 12:41:12 +01:00
Damien George fa391eed9d stmhal: In RTC.wakeup, fix setting of wucksel to get correct period. 
Thanks to Peter Hinch.  See issue #1490.
 2015-10-06 23:39:57 +01:00
Dave Hylands ea8bf81058 stmhal: Replace #include "stm32f4xx_hal.h" with #include STM32_HAL_H. 2015-07-30 00:38:25 +01:00
blmorris 5df81de7af sthmal/rtc.c: Add calibration() method to get/set RTC fine-tuning value. 2015-05-11 23:48:39 +01:00
Damien George 49fe6dc89a stmhal: Add config option to use LSE/LSI for RTC. 
Most boards (except the pyboard) don't have a 32kHz crystal so they
should use the LSI for the RTC.
 2015-03-16 22:54:44 +00:00
Damien George dac79324b5 stmhal: Add rtc.wakeup method, to set wakeup timer. 
This allows to wake from low-power modes at a regular interval.

This method is preliminary, pending testing and API overhaul.
 2015-03-15 17:15:55 +00:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George 57c70d6073 stmhal: Move RTC HAL init functions to rtc.c, where they belong. 
So can remove unnecessary stm32f4xx_hal_msp.c file.
 2014-12-02 12:40:37 +00:00
Damien George ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int. 
Addressing issue #50, still some way to go yet.
 2014-08-30 00:35:11 +01:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t. 
See discussion in issue #50.
 2014-07-03 13:25:24 +01:00
Paul Sokolovsky 8139494e54 stmhal: Include mpconfig.h before all other includes. 
It defines types used by all other headers.

Fixes #691.
 2014-06-28 23:32:03 +03:00
Damien George 04b7cc4df0 stmhal: Fix setting of RTC: was BCD now BIN encoded. 
Addresses issue #592.
 2014-05-10 11:56:58 +01:00
Damien George 04b9147e15 Add license header to (almost) all files. 
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
 2014-05-03 23:27:38 +01:00
Andrew Scheller 86a9a88632 Fix incorrect fix ;) 2014-05-03 18:28:11 +01:00
Andrew Scheller e9ff5570c3 Updated doc fix 2014-05-03 17:50:46 +01:00
Andrew Scheller b569d690f5 RTC doc fix 2014-05-03 17:34:19 +01:00
Damien George ffaf8be1c6 stmhal: Add example use to RTC doc; add rtc.c to gendoc.py. 2014-05-03 12:02:21 +00:00
Damien George 451f78d156 stmhal: Add documentation for RTC class. 2014-05-03 12:40:53 +01:00
Damien George 83407ad082 stmhal: Clean up rtc.c a bit. 2014-04-21 12:45:59 +01:00
Damien George d689430e79 stmhal: Add SPI class. 
Also some updates to compile with latest changes to core py.
 2014-04-20 00:16:30 +01:00
Damien George 6e44381cce stmhal: Improve RTC class; make fatfs use RTC for time stamping files. 2014-04-19 02:17:30 +01:00
Damien George 8b96af6907 stmhal: Get RTC working. 2014-03-15 12:54:48 +00:00