mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
6 586 Commity
3 Gałęzie
5 Tagi
337 MiB
Wykres commitów

6586 Commity (bcf60b43ee778a333c7cb86552d50380109e0f87)

Autor SHA1 Wiadomość Data
Paul Sokolovsky 5e01fb01b3 docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip. 
It used a standard BootROM programming algo and may be useful as a
fallback.
 2016-08-10 21:40:40 +03:00
Damien George 72ae3c72c7 tools/mpy-tool.py: Support freezing float literals with obj-repr C. 
The tool now generates code for freezing floats in obj-repr A, B or C,
with the specific representation detected at compile time using macros.
 2016-08-10 13:26:11 +10:00
Damien George 8a15e0b1c7 esp8266: PULL_UP is not supported on Pin(16), so raise an exception. 2016-08-10 12:45:40 +10:00
Damien George b203c1774e esp8266: Fix reading of pin object for GPIO16. 
Pin(16) now works as an input.
 2016-08-10 12:44:47 +10:00
Paul Sokolovsky 2146cdab5e docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode. 2016-08-09 21:13:27 +03:00
Damien George e4e4526954 docs: Bump version to 1.8.3. 2016-08-09 23:49:25 +10:00
Paul Sokolovsky 3c9510d767 esp8266/modules/flashbdev: Start filesystem at 0x90000. 
To accommodate growing firmware.
 2016-08-09 14:59:27 +03:00
Paul Sokolovsky 3372f69586 esp8266/esp8266.ld: Increase firmware image size to 0x90000 (576K). 
Of them, 0x87000 is irom0 segment.

This is required to ship increasing number of modules and examples
developed in teh course of ESP8266 port project.
 2016-08-09 14:54:26 +03:00
Paul Sokolovsky 6d11918d49 lib/berkeley-db-1.xx: Update, sets default page size to 4096. 
This both good default for 4096 and makes less chance to see overflow page
issues.
 2016-08-09 02:09:59 +03:00
Paul Sokolovsky 5c73de0337 docs/uio: Mention seek()/flush() support for io.BytesIO. 2016-08-09 01:52:56 +03:00
Paul Sokolovsky 3e5534caf7 docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics. 2016-08-07 22:41:34 +03:00
Paul Sokolovsky 1bc2911174 py/mpconfig.h: Define MP_ALWAYSINLINE for reuse. 
Similar to existing MP_NOINLINE.
 2016-08-07 22:36:05 +03:00
Paul Sokolovsky d2cab0b7be docs/esp8266/tutorial/intro: Add anchor for link from quickeref. 2016-08-07 22:16:40 +03:00
Paul Sokolovsky 8897dcb2a1 tests/basics: bytes/str.partition/rpartition are now optional. 
Skip tests if not available.
 2016-08-07 22:14:34 +03:00
Paul Sokolovsky f84dda7111 docs/esp8266/quickref: Link to installation instructions. 2016-08-07 17:46:27 +03:00
Paul Sokolovsky a9923d190e docs/esp8266/intro: Add troubleshooting section. 
Tries to summarize most of the issues we've seen so far.
 2016-08-07 17:28:33 +03:00
Paul Sokolovsky 919c54f750 docs/esp8266/intro: Rename to "Getting started" from "Introduction". 
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
 2016-08-07 17:28:23 +03:00
Paul Sokolovsky 1966745689 esp8266/tutorial/intro: Reword para abou -fm dio switch. 
Not all NodeMCU boards require it.
 2016-08-07 16:31:09 +03:00
Paul Sokolovsky 31ad1bb606 esp8266/modmachine: Implement dummy sleep() function. 2016-08-07 16:20:01 +03:00
Paul Sokolovsky 541e76fa45 esp8266/modutime: Actually implement ticks_cpu(). 2016-08-07 16:13:51 +03:00
Paul Sokolovsky f71f37e426 esp8266/esp_mphal.h: Add mp_hal_ticks_cpu() for reuse. 2016-08-07 16:03:00 +03:00
Paul Sokolovsky c2070d771a esp8266/modmachine: Implement idle() function. 2016-08-07 15:51:04 +03:00
Paul Sokolovsky 1563388001 py/objstr,objstrunicode: Fix inconistent #if indentation. 2016-08-07 15:24:57 +03:00
Paul Sokolovsky 56eb25f049 py/objstr: Make .partition()/.rpartition() methods configurable. 
Default is disabled, enabled for unix port. Saves 600 bytes on x86.
 2016-08-07 06:46:55 +03:00
Paul Sokolovsky a4aaf82421 unix/moduselect: Allow poll.register(), etc. accept fd-like objects. 
This includes file and socket objects, backed by Unix file descriptor.
This improves compatibility with stmhal's uselect (and convenience of
use), though not completely: return value from poll.poll() is still
raw file descriptor.
 2016-08-07 01:25:59 +03:00
Paul Sokolovsky fdb411a8c5 docs/library/index: Include array module in ToC. 2016-08-07 00:16:41 +03:00
Paul Sokolovsky 8a0b6f561c docs/array: Document array module. 2016-08-07 00:13:48 +03:00
Paul Sokolovsky e15fb33e10 extmod/modwebrepl: Add GET_VER operation to query MicroPython version. 2016-08-07 00:01:25 +03:00
Paul Sokolovsky cbef0dba2e extmod/modwebsocket: Use mp_rom_map_elem_t and friends. 2016-08-06 16:18:03 +03:00
Paul Sokolovsky e0d49b7e1b extmod/modwebsocket: Make compatible with non-default object models. 2016-08-06 15:53:16 +03:00
Paul Sokolovsky 6de37864a2 esp8266/scripts/inisetup: Add commented-out call to esp.osdebug(None). 
That apparently will only help folks who read the docs on how to disable,
but could use a quick reminder straight in boot.py. For the developers,
it's important to have debug logging enabled in development branch
(master).
 2016-08-06 15:27:38 +03:00
Paul Sokolovsky ca59f5f208 esp8266/flashbdev: Reserve extra sysparam sector for SDK 2.0.0 compatibility. 2016-08-06 15:21:49 +03:00
Paul Sokolovsky 5b9e7e29f6 unix: Enable websocket module. 2016-08-06 15:15:53 +03:00
Paul Sokolovsky a931c4eeec extmod/modwebsocket: Add readline method. 
This goes bit against websocket nature (message-based communication),
as it ignores boundaries bertween messages, but may be very practical
to do simple things with websockets.
 2016-08-06 15:13:26 +03:00
Paul Sokolovsky 3d19adf9b3 examples/network: Split recv- and read-based HTTP servers. 
Name recv() based a "simplistic", as it can't work robustly in every
environment. All this is to let people concentreate on proper, read()-
based one (and to turn recv() based into a "negative showcase",
explaining what are the pitfalls of such approach).
 2016-08-06 01:59:51 +03:00
Paul Sokolovsky d79342d33e extmod/modbtree: open(): Add option kwargs. 
Namely: flags, cachesize, pagesize, minkeypage.
 2016-08-06 00:10:22 +03:00
Paul Sokolovsky ed500e4987 extmod/modwebrepl: Make GET_FILE operation non-blocking. 
In the sense that while GET_FILE transfers its data, REPL still works.
This is done by requiring client to send 1-byte block before WebREPL
server transfers next block of data.
 2016-08-05 22:57:50 +03:00
Paul Sokolovsky c16612ee87 extmod/modwebrepl: Factor out "GET" iteration to write_file_chunk(). 2016-08-05 22:53:10 +03:00
Paul Sokolovsky 7fb31479bf py/mkrules.mk: Allow to add more items for "clean" target using CLEAN_EXTRA. 2016-08-04 23:46:08 +03:00
David Siorpaes b67eb20ed0 stmhal: Fix I2C mappings for STM32F429DISC board. 2016-08-04 22:51:53 +10:00
Paul Sokolovsky 4a27ad040e esp8266/scripts/port_diag.py: Include esp.check_fw() call. 2016-08-04 00:43:58 +03:00
Paul Sokolovsky e33d2383d1 esp8266/modesp: Add check_fw() function to check integrity of the firmware. 
Requires firmware generated by the latest makeimg.py (which stores size
and md5 of the firmware together with the firmware itself).
 2016-08-04 00:29:19 +03:00
Paul Sokolovsky bf47b71b78 esp8266/makeimg.py: Append md5 hash to the generated binary. 
md5 is calculated over the entire file, except first 4 bytes, which contain
flash parameters and may be changed by flashing tool or MicroPython flash
auto-config.
 2016-08-04 00:21:05 +03:00
Paul Sokolovsky a621333a4c esp8266/makeimg.py: Store firmware size as last 4 bytes of padding area. 2016-08-04 00:19:09 +03:00
Radomir Dopieralski efb8aa0ef6 logo/1bit-logo A black & white version of the logo 
This version of the logo may be useful for displaying on small
devices to show that they use MicroPython.
 2016-08-02 14:59:55 +03:00
Mike Causer ce166e6b68 docs: Spelling mistakes 2016-08-02 11:17:46 +03:00
Paul Sokolovsky 3eb532e974 extmod/modbtree: Implement __contains__ operation. 2016-08-02 00:24:59 +03:00
Damien George 8766bc02dc cc3200, teensy: Remove broken malloc/free/realloc macro helpers. 
These macros are broken and are anyway unused on these two ports.  If they
are ever needed in the future then their implementation can be taken from
either stmhal (working macros in mpconfigport.h) or esp8266 (functions).
 2016-08-02 01:12:45 +10:00
Mike Causer b4564841b6 docs: Add DHT to ESP8266 Quick Ref and Tutorial 2016-08-01 14:39:57 +03:00
Paul Sokolovsky 0e4cae5212 esp8266: Make APA102 driver inclusion configurable. 2016-08-01 00:03:55 +03:00