Wykres commitów

3773 Commity (b6a977848407a4ced45d118cf926bd915cc89dfb)

Autor SHA1 Wiadomość Data
Jim Mussared b6a9778484 py/misc: Change sizeof to offsetof for variable-length alloc.
This fixes the case where e.g.

    struct foo_t {
      mp_obj_t x;
      uint16_t y;
      char buf[];
    };

will have `sizeof(struct foo_t)==8`, but `offsetof(struct foo_t, buf)==6`.

When computing the size to allocate for `m_new_obj_var` we need to use
offsetof to avoid over-allocating. This is important especially when it
might cause it to spill over into another GC block.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 16:03:18 +11:00
Jim Mussared 6ef9b29f88 {cc3200,nrf}/boards/make-pins.py: Add a note about tools/boardgen.py.
It's not worth the effort to update these ports to use boardgen.py, but
put a note just in case anyone uses this as a reference for a new port.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:18:54 +11:00
Jim Mussared 1f804e03f6 renesas-ra/boards/make-pins.py: Update to use tools/boardgen.py.
This removes previously unused functionality to generate pins_ad_const.h,
as well as the unused handling of pin AF in machine_pin.c.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:18:54 +11:00
Jim Mussared c0b64a3f23 mimxrt/boards/make-pins.py: Update to use tools/boardgen.py.
Minor change to remove support for using numeric IDs for machine.Pin.  This
was previously based on the index of the pin in the board csv, but this is
different (and incompatible) with other ports.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:18:54 +11:00
Jim Mussared 4d568a5bd7 samd/boards/make-pins.py: Update to use tools/boardgen.py.
This replaces the previous make-pin-table.py with an implementation based
on boardgen.py.

- MICROPY_PY_MACHINE_PIN_BOARD_CPU macro is removed. This isn't optional
  on other ports, so no need for it to be optional on SAMD.
- pin_af_table is removed, and lookups just search the cpu dict instead
  (this saves N*wordsize bytes of firmware size to have this extra table).
- pins.csv is now BOARD,CPU to match other ports.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:18:32 +11:00
Jim Mussared ff6c2adfd7 stm32/boards/make-pins.py: Add initial support for H7 dual-pad pins.
This fixes the H7 af.csv files to include the dual-pad information, by
listing the ADCs supported on the _C pad with a C_ADC prefix.

Minimal change to make-pins.py to ignore these entries. This will be
implemented later to emit constants (similar to ADC.CORE_TEMP) to access
these channels.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:18:32 +11:00
Jim Mussared 724ebb9916 stm32/boards/make-pins.py: Update to use tools/boardgen.py.
Requires additions to tools/boardgen.py for stm32 pin generation.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:16:49 +11:00
Jim Mussared b4236c7368 stm32: Rename pin_obj_t to machine_pin_obj_t.
This is now consistent with other ports.

Also renamed `pin_{board/cpu}_pins_locals_dict` to
`machine_pin_{board/cpu}_pins_locals_dict`.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:09:08 +11:00
Jim Mussared 286b1b3ed9 stm32/boards: Format stm32 alternate function csv files.
Changes are:
- Pad all cells to make them easier to read.
- Ensure all files have exactly 19 columns (Port,Pin,AF0-15,ADC)

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:08:39 +11:00
Jim Mussared 98dff07bb4 stm32/boards: Fix errors in pins.csv and af.csv.
Fixes are:
- Comment out lines in pins.csv that do not have valid CPU pins.
  It's useful to keep these in the file as "documentation" but in order to
  make make-pins.py stricter they need to be commented out.
- Fix some typos (missing P prefix) in pins.csv.
  This resulted in some missing board pins.
- Fix some typos in af.csv files.
  Some typos of "ADC" and some other that were previously ignored.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:07:10 +11:00
Jim Mussared 4bd6ec9ae4 tools/boardgen.py: Add initial implementation of a common make-pins.py.
For now, this implements the functionality required for esp32 and rp2,
including support for numeric pins, rp2 alternate functions, and rp2
extended pins.

This also updates the rp2 port to use the same structure for pins.h and
pins.csv as for esp32, and moves the pin definitions directly into the
table (rather than having a table of pointers), which is a small code size
improvement.

Support for "hidden" pins in pins.csv is added (matching the stm32
implementation).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:06:27 +11:00
Jim Mussared b0aec6a0ff esp32/machine_pin: Make irq object a sub-field of pin object.
This simplifies pin generation.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:05:47 +11:00
Jim Mussared 9cabee8252 ports: Standardise arguments and output for make-pins.py script.
All ports now use `--board-csv`, `--prefix`, `--output-souce`,
`--output-header` and no longer write to stdout.  This matches the esp32
implementation.

Ports that have an AF input use `--af-csv` (to match `--board-csv`).

Any additional output files are now prefixed with `output-` (e.g.
`--output-af-const`).

Default arguments are removed (all makefiles should always specify all
arguments, using default values is likely an error).

Replaced the `af-defs-cmp-strings` and `hdr-obj-decls` args for stm32 with
just `mboot-mode`.  Previously they were set on the regular build, now the
logic is reversed so mboot sets it.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:04:35 +11:00
Jim Mussared 1ee5731122 ports: Remove SRC_QSTR_AUTO_DEPS from all ports' Makefiles.
It's unused.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:04:17 +11:00
Jim Mussared 59f3c7facb examples/pins.py: Remove this pins printing example.
It's not supported on all ports, adds complexity to the build to generate
pins_af.py, and can mostly be replicated just by printing the pin objects.

Remove support for generating pins_af.py from all ports (nrf, stm32,
renesas-ra, mimxrt, rp2).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:03:28 +11:00
Jim Mussared cb37b7bba7 cc3200/boards/make-pins.py: Don't generate qstrs.
The output pins.c can be processed for qstrs like any other C file.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:02:58 +11:00
Jim Mussared df28aa1a59 renesas-ra/boards/make-pins.py: Don't generate qstrs.
The output pins.c can be processed for qstrs like any other C file.

Also remove af_const from Makefile (unimplemented in make-pins.py) and fix
target dependency on ad_const.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:01:30 +11:00
Jim Mussared 3f99dbd634 nrf/boards/make-pins.py: Don't generate qstrs.
The output pins.c can be processed for qstrs like any other C file.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 14:01:04 +11:00
Jim Mussared fc54d25a45 stm32/boards/make-pins.py: Don't generate qstrs.
Qstrs are picked up from the generated pin source files in the usual qstr
processing stage.

Similarly for the stm constant qstrs.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 13:59:19 +11:00
Jim Mussared c3c7c602da rp2/boards/make-pins.py: Don't generate qstrs.
Also remove af-const header, as this is left over from the STM32 version
and unused.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 13:58:07 +11:00
Jim Mussared 2eda513870 py/mkrules.mk: Add rule for compiling auto-generated source files.
This prevents each port Makefile from having to add an explicit rule for
`build-BOARD/pins_BOARD.c`.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 13:57:47 +11:00
Jim Mussared bbd8760bd9 all: Update Python formatting to ruff-format.
This updates a small number of files that change with ruff-format's (vs
black's) rules.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-11-03 13:30:41 +11:00
Andrew Leech 06a7bf967c esp32/usb: Wake main thread when USB receives data.
This improves (decreases) the latency on stdin, on SoCs with built-in USB
and using TinyUSB, like S2 and S3.

Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
2023-11-01 16:27:10 +11:00
Andrew Leech d8a263435f esp32/mphalport: Add function to wake main from separate FreeRTOS task.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
2023-11-01 16:24:57 +11:00
Alessandro Gatti 95ce61d0ad esp32: Use better build settings for ESP32-C3.
ESP32-C3 is not Xtensa-based, so build settings are now tailored a bit
better following that fact.  ESP-IDF 5.x already adds architecture-specific
modules by itself so there is no need to specify either the `xtensa` or the
`riscv` module in the build settings.

Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
2023-11-01 11:38:09 +11:00
Damien George 4cffa848f6 esp32/boards: Reduce size of D2WD and OTA firmware.
Commit c4e63ace66 enabled the SPI Ethernet
driver and that cost about 13k of firwmare size, pushing the firmware over
the limit of the D2WD and OTA board variants available size.

To fix, disable SPI Ethernet on the D2WD variant, and build the OTA variant
with size optimisation rather than performance optimisation.

Signed-off-by: Damien George <damien@micropython.org>
2023-11-01 10:38:52 +11:00
Jim Mussared e579ebb11b teensy: Remove the teensy port.
This port is largely unmaintained, has limited features (the only hardware
support is for GPIO and timer, and no machine module), only supports a
small number of Teensy boards, and can be confused with the mimxrt support
for Teensy 4.x.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-10-31 13:04:41 +11:00
Pascal Brunot a8dd69f206 esp32/modmachine: Fix deepsleep() when previous sleep delay was set.
Fixes issue #7158.

Signed-off-by: Pascal Brunot <pascal.brunot@gmail.com>
2023-10-31 12:48:32 +11:00
robert-hh bbbd484f5b esp32/network_lan: Register the hostname setting for Ethernet.
Fixes issue #12817.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-10-31 12:42:36 +11:00
robert-hh 9c244134fb esp32/network_lan: Fix LAN.isconnected().
nic.isconnected() returns now "True", if a) the physical link is up and b)
an IP address is assigned.  The latter happens often by DHCP, in which case
an active connection can be assumed.  If the IP address is set manually,
nic.isconnected() would report "True" as well, if at least the physical
link is up.  This matches WLAN behaviour which returns "True" when the WLAN
has an IP address.

Before, the behaviour of nic.isconneceted() was erratic, returning "True"
sometimes even without a Ethernet cable attached.

Fixes issue #12741.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-10-31 12:42:33 +11:00
robert-hh c4e63ace66 esp32/network_lan: Fix and simplify the code for ETH-SPI devices.
SPI support was not enabled, and was not adapted for esp-idf v5.x.  This
change enables SPI ethernet for all boards and adapts the code for esp-idf
v5.x.  The change follows the sample implementation of @hemakumarm72, but
adds the changes for the other adapters as well.  Further, it simplifies
the code by removing actions from netwwork_lan.c which are done in the
esp-idf drivers later, like setting the default values for .command_bits
and .address_bits, and registering the SPI interface.

Tested with a Wiznet W5500 breakout.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-10-31 12:35:22 +11:00
Daniël van de Giessen b2f220dff8 esp32/boards: Disable ALPN support.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-31 12:18:16 +11:00
Daniël van de Giessen a1d20e0747 esp32/network_ppp: Reduce PPP thread CPU usage.
Reduces the CPU usage by the PPP thread by sleeping for one tick if
there was nothing to read; preventing the loop using 100% CPU when the
read operation has a zero timeout and immediately returns.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-31 12:10:36 +11:00
Daniël van de Giessen f1d6af9819 esp32/machine_uart: Add error checking for IDF API's.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-31 12:04:33 +11:00
Daniël van de Giessen e676edac79 esp32/mpconfigport: Remove port-specific GAP name.
Instead use the generic default defined in modbluetooth_nimble.c.
This then also allows custom boards to easily override the default
Bluetooth GAP name.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-31 12:01:47 +11:00
Daniël van de Giessen f74131134c esp32: Poll serial/JTAG for unread data to prevent blocking.
If data is pushed over serial/JTAG too fast we may fill up stdin_ringbuf
and not be able to read all the data out of the serial/JTAG buffer. Thus
we need to explicitly poll and read the serial/JTAG RX buffer to prevent
blocking (since if the serial/JTAG buffer is already filled, we will not
get another interrupt to transfer it to the stdin ringbuffer).

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-31 11:59:15 +11:00
Alessandro Gatti 1cf3085c57 esp32/network_ppp: Allow building with IPv6 disabled.
PPP code assumes that IPv6 support is enabled.  Whilst this is the default,
certain applications may want to disable IPv6 support if not needed (or to
reduce code size).

This makes the code build with CONFIG_LWIP_IPV6 disabled, reducing code by
about 30k in that case.

Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
2023-10-31 11:54:25 +11:00
Seon Rozenblum c146017f8a esp32/boards: Update UM board settings to use custom PID/VID.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>
2023-10-30 17:31:44 +11:00
Seon Rozenblum bdae847082 esp32/boards/UM_TINYWATCHS3: Add new UM TinyWATCH S3 board.
Signed-off-by: Seon Rozenblum <seon@unexpectedmaker.com>
2023-10-30 17:31:21 +11:00
Jim Mussared e910533012 bare-arm/lib: Add minimal strncmp implementation.
Required by upcoming qstr sorting.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-30 11:10:02 +11:00
Jim Mussared 3bf70f16e9 py/mkrules.mk: Add MICROPY_PREVIEW_VERSION_2.
This provides a way to enable features and changes slated for MicroPython
2.x, by running `make MICROPY_PREVIEW_VERSION_2=1`. Also supported for
the cmake ports (except Zephyr).

This is an alternative to having a 2.x development branch (or equivalently,
keeping a 1.x release branch). Any feature or change that needs to be
"hidden" until 2.x can use this flag (either in the Makefile or the
preprocessor).

A good example is changing function arguments or other public API features,
in particular to aid in improving consistency between ports.

When `MICROPY_PREVIEW_VERSION_2` is enabled, the REPL banner is amended to
say "MicroPython (with v2.0 preview) vX.Y.Z", and sys.implementation gets a
new field `_v2` set to `True`.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-27 15:28:46 +11:00
Damien George 3e2706a18d extmod/modmachine: Consolidate mem, i2c and spi headers to modmachine.h.
The contents of machine_mem.h, machine_i2c.h and machine_spi.h have been
moved into extmod/modmachine.h.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 17:40:22 +11:00
Damien George 6989aba93b nrf/modules/machine: Use SPI Python bindings provided by extmod.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 17:37:39 +11:00
Damien George d336c1b79b extmod/modmachine: Consolidate simple machine headers into modmachine.h.
The contents of machine_bitstream.h, machine_pinbase.h, machine_pulse.h and
machine_signal.h have been moved into extmod/modmachine.h.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 16:49:27 +11:00
Damien George 90023b4dcf extmod/modmachine: Clean up decls of machine types to use common ones.
The machine_i2c_type, machine_spi_type and machine_timer_type symbols are
already declared in extmod/modmachine.h and should not be declared anywhere
else.

Also move declarations of machine_pin_type and machine_rtc_type to the
common header in extmod.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 16:20:53 +11:00
Damien George 5b4a2baff6 extmod/machine_uart: Factor ports' UART Python bindings to common code.
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings.  For all ports except the two listed
below there is no functional change.

The nrf port has UART.sendbreak() removed, but this method previously did
nothing.

The zephyr port has the following methods added:
- UART.init(): supports setting timeout and timeout_char.
- UART.deinit(): does nothing, just returns None.
- UART.flush(): raises OSError(EINVAL) because it's not implemented.
- UART.any() and UART.txdone(): raise NotImplementedError.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 10:46:42 +11:00
Damien George 95d8b5fd55 extmod/machine_adc: Factor ports' ADC Python bindings to common code.
No functional change, just code factoring to have the Python bindings in
one location, and all the ports use those same bindings.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-23 17:16:45 +11:00
Damien George 48e0986666 nrf/boards: Automatically configure MICROPY_PY_MACHINE_PWM.
This commit makes it so that MICROPY_PY_MACHINE_PWM is enabled if at least
one of MICROPY_PY_MACHINE_HW_PWM and/or MICROPY_PY_MACHINE_SOFT_PWM are
enabled.  This simplifies the configuration for boards, and fixes DVK_BL652
which enabled PWM without selecting software or hardware implementations.

With this change, DVK_BL652 and EVK_NINA_B1 now enable (hardware) PWM.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-23 11:20:49 +11:00
Damien George 91a3f18391 extmod/machine_i2s: Factor comments, some enums and macros.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-20 17:40:17 +11:00
Damien George 46ae3b5a34 extmod/machine_i2s: Factor init_helper argument parsing.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-20 17:40:17 +11:00