danicampora
0c11b167a7
cc3200: Add optimization flags to drivers/cc3100 in the debug build.
2015-02-22 17:50:52 +01:00
danicampora
5687ce7e35
drivers/cc3100: Remove simplelink trace messages completely.
...
Those trace messages have never proven to be useful and they make
the code 9K bigger.
2015-02-22 17:50:51 +01:00
danicampora
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
Damien George
5c047b97f2
tests: Add test for math special functions.
2015-02-22 14:49:46 +00:00
Damien George
5cbeacebdb
py: Make math special functions configurable and disabled by default.
...
The implementation of these functions is very large (order 4k) and they
are rarely used, so we don't enable them by default.
They are however enabled in stmhal and unix, since we have the room.
2015-02-22 14:48:18 +00:00
Damien George
9ab94c468c
lib/libm: Add implementations of erf, erfc, lgamma, tgamma.
2015-02-22 14:47:11 +00:00
Paul Sokolovsky
3527085587
pyb.UART.rst: Clean up note about stream protocol support.
2015-02-22 13:36:35 +02:00
Damien George
77fc276c08
stmhal: For UART, check that baudrate is within 5% of desired value.
...
Also includes documentation about minimum baudrate.
Addresses issue #1090 .
2015-02-22 00:26:49 +00:00
Paul Sokolovsky
e06cf89f04
py: Add few more special methods.
2015-02-22 01:21:08 +02:00
Damien George
3611c1de14
drivers/cc3100: Remove dependence on debug.h.
2015-02-21 22:04:07 +00:00
danicampora
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
danicampora
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
danicampora
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
danicampora
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
danicampora
1cf82a9800
drivers/cc3100: Make wlan.c closer to TI original file.
2015-02-21 22:24:41 +01:00
Damien George
5ca1f5f9d9
cc3200: Get compiling with CC3100 driver from drivers/ directory.
2015-02-21 19:55:57 +00:00
Damien George
49c2ad4fb4
cc3200: Move CC3100 driver from cc3200/simplelink to drivers/cc3100.
...
This commit will not build, it exists just to track changes.
2015-02-21 19:52:07 +00:00
Damien George
36e2845e36
cc3200: Replace physical tabs with spaces.
...
Preparing this to move to drivers/ directory, want to make it as similar
to original code from TI as possible.
2015-02-21 19:48:34 +00:00
Damien George
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
Damien George
eff359e114
py: Expose mp_obj_list_remove as a public function.
2015-02-21 14:47:02 +00:00
danicampora
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
danicampora
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
danicampora
571e3f5804
cc3200: Add exit values to the shell scripts.
2015-02-21 14:19:36 +01:00
danicampora
a6862fc812
cc3200: Disable MICROPY_OPT_COMPUTED_GOTO.
...
Saves around 1.3K. At the same time re-enable MICROPY_PY_SYS_EXIT
since it doesn't take much space and might be useful for certain
scripts.
2015-02-21 14:19:32 +01:00
Damien George
4e3906d6b5
tests: Add tests for ure groups and named char classes.
...
Issue #1122 should now be fixed.
2015-02-21 10:39:41 +00:00
Damien George
d09a5b51c2
extmod: Pull in upstream changes to re1.5; fixes bug, adds named class.
2015-02-21 10:33:20 +00:00
Paul Sokolovsky
2e24034c3f
run-tests-exp.sh: Typo fix in comment.
2015-02-21 03:22:33 +02:00
danicampora
82fabf4e52
cc3200: Disable MICROPY_PY_SYS_EXIT and MICROPY_EMIT_INLINE_THUMB.
...
Disabling MICROPY_EMIT_INLINE_THUMB gives us back around 6K of
precious RAM.
2015-02-20 17:12:39 +01:00
danicampora
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
danicampora
7807da20ab
cc3200: Increase UART default read buffer size to 128 bytes.
2015-02-20 16:41:49 +01:00
danicampora
868fa82ea4
cc3200: Add ADC module.
2015-02-20 16:40:59 +01:00
danicampora
5d2344d009
cc3200: Change safe-boot pin to GPIO28.
2015-02-20 16:40:19 +01:00
danicampora
2b899b6708
cc3200: Remove asserts from sl_Stop() and reduce timeout to 250ms.
2015-02-20 16:40:15 +01:00
danicampora
6ff9a47255
cc3200: Move `closed` field in mod_network_socket_obj_t out of the union.
2015-02-20 16:40:10 +01:00
danicampora
e1dfc44178
cc3200: Disable FreeRTOS asserts. Optimize more files if BTYPE=debug.
2015-02-20 16:40:06 +01:00
Damien George
690458300b
extmod/modure: Make num_matches store actual number of matches.
2015-02-18 14:47:14 +00:00
Paul Sokolovsky
8c705233f3
py: Fix mp_obj_print() to work when Python streams are not used.
2015-02-17 00:32:18 +02:00
Paul Sokolovsky
1f91e92cc6
py: Revamp mp_obj_print() to use Python streams.
...
Most of printing infrastructure now uses streams, but mp_obj_print() used
libc's printf(), which led to weird buffering issues in output. So, switch
mp_obj_print() to streams too, even though it may make sense to move it to
a separate file, as it is purely a debugging function now.
2015-02-17 00:13:01 +02:00
Damien George
eff10f66a6
py: Implement bl/bx instructions for inline Thumb assembler.
2015-02-16 18:17:07 +00:00
Damien George
42495392da
py: Implement "it" instruction for inline Thumb assembler.
2015-02-16 17:46:49 +00:00
Damien George
3d7bf5d4b1
py: More robust checking in inline assembler compiler.
2015-02-16 17:46:28 +00:00
Damien George
b191038198
qemu-arm: Enable source line numbers, for easier debugging.
2015-02-16 17:45:34 +00:00
Paul Sokolovsky
ee831cafa9
tests: Add another testcase for relative imports.
2015-02-16 12:11:41 +02:00
Paul Sokolovsky
9e6c82960e
builtinimport: Revamp&refactor handling of relative imports.
...
Relative imports are based of a package, so we're currently at a module
within a package, we should get to package first.
Also, factor out path travsering operation, but this broke testing for
boundary errors with relative imports. TODO: reintroduce them, together
with proper tests.
2015-02-16 12:11:34 +02:00
Paul Sokolovsky
078172dcab
builtinimport: Improve debugging output.
2015-02-16 12:11:03 +02:00
Paul Sokolovsky
e8432b3c72
stackctrl: Encode "recursion depth exceeded" message as qstr.
...
So corresponding exception can be thrown even under tight memory conditions.
2015-02-15 22:41:14 +03:00
Paul Sokolovsky
fa3b895145
objexcept: Optimize traceback allocation for exception.
...
Traceback allocation for exception will now never lead to recursive
MemoryError exception - if there's no memory for traceback, it simply
won't be created.
2015-02-15 22:41:14 +03:00
Paul Sokolovsky
29c4f92e13
objexcept: Optimize using messages without formatting substitutions.
...
They are directly cast to str object, skipping allocation of formatting
buffer.
2015-02-15 22:41:14 +03:00
Paul Sokolovsky
3077fbff26
nlr: Add even more optional debugging logging.
...
Has to be enabled by manual editing, but at least it's there, as debugging
NLR issues may be weird.
2015-02-15 20:28:18 +03:00
Paul Sokolovsky
e89cc13e5c
nlr: If DEBUG, guard against recursive nlr_push().
...
Pushing same NLR record twice would lead to "infinite loop" in nlr_jump
(but more realistically, it will crash as soon as NLR record on stack is
overwritten).
2015-02-15 20:23:52 +03:00