4f936afc44
stm32/network_wiznet5k: Add ability to set the MAC address.
2019-04-05 22:35:04 +11:00
4410efc1e3
stm32/network_wiznet5k: Add ability to trace Ethernet TX and RX frames.
...
Via: nic.config(trace=2|4)
2019-04-05 22:33:49 +11:00
69cb24a21d
esp32/boards/sdkconfig: Disable WDT check of idle task on CPU1.
...
With dual-core enabled it's possible that the uPy task has full utilisation
of CPU1. Fixes issue #4673 .
2019-04-05 12:25:21 +11:00
1f5d945afa
nrf/Makefile: Update to match latest oofatfs version.
...
See corresponding commit b5f33ac2cb
2019-04-01 19:22:25 +02:00
83f3c29d36
stm32/moduos: Allow to compile again without USB enabled.
2019-04-01 17:11:39 +11:00
7ce2a08231
stm32: Add support for MMC driver, exposed via pyb.MMCard class.
...
Enable it via MICROPY_HW_ENABLE_MMCARD.
2019-04-01 17:04:43 +11:00
9670b26526
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
...
For consistency with the majority of other MICROPY_HW_ENABLE_xxx macros.
2019-04-01 15:21:26 +11:00
7b5bf5f6fd
stm32/uart: Handle correctly the char overrun case of RXNE=0 and ORE=1.
...
Fixes issue #3375 .
2019-04-01 13:40:35 +11:00
edd0e0f93d
stm32/timer: Expose the PWM BRK capability of Timer 1 and 8.
...
The break mode is configurable via the 'brk' keyword to the Timer
constructor and init method. It's disabled by default.
2019-04-01 13:30:37 +11:00
9d6f70f715
stm32: Make default USB_VCP stream go through uos.dupterm for main REPL.
...
Use uos.dupterm for REPL configuration of the main USB_VCP(0) stream on
dupterm slot 1, if USB is enabled. This means dupterm can also be used to
disable the boot REPL port if desired, via uos.dupterm(None, 1).
For efficiency this adds a simple hook to the global uos.dupterm code to
work with streams that are known to be native streams.
2019-04-01 13:04:05 +11:00
6947dff7da
stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile.
2019-03-29 11:34:05 +11:00
1a608ce1e8
stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board.
2019-03-28 15:35:58 +11:00
92149c8a79
esp32/boards: Enable dual core support by default.
...
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
2019-03-27 11:20:21 +11:00
815b79a8d0
esp32/mpthreadport: Exit vPortCleanUpTCB early if threading not init'd.
2019-03-27 11:11:06 +11:00
0b86ba565c
unix/mpthreadport: Use named semaphores on Mac OS X.
...
Unnamed semaphores (via sem_init) are not supported on this OS. See #4465 .
2019-03-27 10:50:01 +11:00
781947afdc
stm32/mpconfigport.h: Remove malloc/free/realloc helper macros.
...
These macros are unused, and they can conflict with other entities by the
same name. If needed they can be provided as static inline functions, or
just functions.
Fixes issue #4559 .
2019-03-26 18:42:19 +11:00
d396a7e10d
stm32/system_stm32: Provide default value for HSI calibration.
...
If HSI is used the calibration value must be valid. Fixes #4596 .
2019-03-26 17:10:21 +11:00
2befcb8a9d
zephyr/i2c: Add support for hardware i2c.
...
Adds support for hardware i2c to the zephyr port. Similar to other ports
such as stm32 and nrf, we only implement the i2c protocol functions
(readfrom and writeto) and defer memory operations (readfrom_mem,
readfrom_mem_into, and writeto_mem) to the software i2c implementation.
This may need to change in the future because zephyr is considering
deprecating its i2c_transfer function in favor of i2c_write_read; in this
case we would probably want to implement the memory operations directly
using i2c_write_read.
Tested with the accelerometer on frdm_k64f and bbc_microbit boards.
2019-03-26 16:16:26 +11:00
673db939b5
esp32/machine_pin: Rework pull mode config to fix GPIO hold feature.
...
For gpio_hold_en() to work properly (not draw additional current) pull
up/down must be disabled when hold is enabled. This patch makes sure this
is the case by reworking the pull constants to be a bit mask.
2019-03-26 15:21:23 +11:00
e0c6dfe90a
nrf/readme: Add section about LTO.
...
Adding section about on how to disable use of the linker flag
-flto, by setting the LTO=0 argument to Make. Also, added a
note on recommended toolchains to use that works well with
LTO enabled.
2019-03-19 16:59:18 +01:00
ec6e62efc2
stm32/mboot: Set USE_MBOOT=1 by default in the Makefile.
...
This allows boards that need USE_MBOOT to be built properly whether or not
USE_MBOOT=1 is specified when building mboot.
2019-03-18 14:01:43 +11:00
696549d2e5
nrf/bluetooth: Deprecate use of SoftDevice s140 v6.0.0.
...
Removing linker script for nrf52840 s140 v6.0.0 as pca10056
target board now points to the new v6.1.1. Also, removing the
entry from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
a3a266a9c3
nrf/board: Migrate nrf52840 target to new BLE stack.
...
This patch moves pca10056/nrf52840 target board to use
the new SoftDevice s140 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
d3c1436e75
nrf/bluetooth: Add support for SoftDevice s140 version 6.1.1.
...
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
1e5e3e3d48
nrf/bluetooth: Deprecate use of SoftDevice s132 v6.0.0.
...
Removing linker script for nrf52832 s132 v6.0.0 as all target
boards now points to the new v6.1.1. Also, removing the entry
from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
5f26ef1112
nrf/board: Migrate all nrf52832 targets to new BLE stack.
...
This patch moves all the nrf52832 target boards to use the
new SoftDevice s132 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
e8ed2dea71
nrf/bluetooth: Add support for SoftDevice s132 version 6.1.1.
...
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
c9eb7eb449
stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define.
...
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
2019-03-14 14:02:21 +11:00
c7d19dc0ad
ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code.
2019-03-14 12:22:49 +11:00
ddc934631c
esp32/machine_pin: Add new PULL_HOLD pin pull mode.
2019-03-14 07:28:57 +11:00
349b54525e
esp32/machine_pin: Make it so None as pull value disables pull up/down.
...
Previously specifying None as the pull value would leave the pull up/down
state unchanged. This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
2019-03-14 07:26:59 +11:00
ea2fcdd338
javascript: Fix Emscripten async load, and to compile with modern clang.
2019-03-13 23:52:15 +11:00
7d675f3a17
javascript: Add new port targeting JavaScript via Emscripten.
...
In this port JavaScript is the underlying "machine" and MicroPython is
transmuted into JavaScript by Emscripten. MicroPython can then run under
Node.js or in the browser.
2019-03-13 23:47:32 +11:00
493ee7df18
zephyr/prj_frdm_kw41z.conf: Add new board configuration.
...
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
2019-03-12 17:12:13 +11:00
7748375b6e
zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor.
...
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
2019-03-12 17:12:00 +11:00
6d82499a48
zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr.
2019-03-12 17:11:52 +11:00
755b0b807b
zephyr/prj_minimal.conf: Switch to CONFIG_STDOUT_CONSOLE.
...
Prompted by code size analysis, after arduino_101 build overflowing ROM.
2019-03-12 17:11:46 +11:00
21fc0c448e
zephyr/modzsensor: Rename "TEMP" sensor channel to "DIE_TEMP".
...
I.e. on-die temperature sensor. Upstream made more fine-grained channels
for different kinds of temperature.
2019-03-12 17:11:30 +11:00
a42c1d9fd5
zephyr/modzephyr: Revamp stacks_analyze() call.
...
Underlying k_call_stacks_analyze() was gone in Zephyr, reimplement using
k_thread_foreach().
2019-03-12 17:11:09 +11:00
297092a76a
esp32/mphalport: Use ets_delay_us for mp_hal_delay_us_fast.
...
The system provided one is in ROM and is more accurate.
2019-03-12 15:46:44 +11:00
fcace26d87
esp32/Makefile: Add some missing IDF source files to bootloader and app.
...
Functions in these files may be needed when certain features are enabled
(eg dual core mode), even if the linker does not give a warning or error
about unresolved symbols.
2019-03-11 23:17:09 +11:00
41e7ad647e
esp32/modnetwork: Remove redundant esp_log include.
2019-03-08 23:36:07 +11:00
73c48b1b45
esp32/modnetwork: Implement RSSI for WiFi STA via WLAN.status('rssi').
2019-03-08 23:35:28 +11:00
5688c9ba09
stm32/usb: Allow to override USB strings & VID/PID in app and mboot.
...
The override #define's should go in the board's mpconfigboard.h file.
2019-03-08 23:29:15 +11:00
0c60cb1fc4
stm32/qspi: Set pin speed to very-high and allow to config some options.
...
The default speed of the QSPI interface is 72Mhz whereas the standard AF
pin speed (high) is only rated to 50Mhz, so increase speed to very-high.
2019-03-08 23:17:50 +11:00
89ff506513
py: Update and rework build system for including external C modules.
...
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
cf22f4793c
py: Allow registration of modules at their definition.
...
During make, makemoduledefs.py parses the current builds c files for
MP_REGISTER_MODULE(module_name, obj_module, enabled_define)
These are used to generate a header with the required entries for
"mp_rom_map_elem_t mp_builtin_module_table[]" in py/objmodule.c
2019-03-08 22:46:43 +11:00
e4ac104b7f
stm32: Allow to build with threading with the GIL disabled.
2019-03-08 22:29:54 +11:00
c6a9bb23cd
unix/Makefile: Update coverage tests to match those in Travis.
2019-03-08 16:51:09 +11:00
7852b287df
minimal/frozentest: Recompile now that mpy format and version changed.
2019-03-08 15:53:05 +11:00
Damien George