Similar to ruff.yaml, it's simpler to run the codespell command directly
from a workflow file. And developers can run codespell directly from the
command line without the need for options, or just use pre-commit.
This commit also applies a specific version to codespell, same as
pre-commit (introduced in a166d805f4).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The current `ssl` module has quite a few differences to the CPython
implementation. This change moves the MicroPython variant to a new `tls`
module and provides a wrapper module for `ssl` (in micropython-lib).
Users who only rely on implemented comparible behavior can continue to use
`ssl`, while users that rely on non-compatible behavior should switch to
`tls`. Then we can make the facade in `ssl` more strictly adhere to
CPython.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
By moving to GitHub actions, all MicroPython CI builds are now on GitHub
actions. This allows faster parallel builds and saves time by not building
when no relevant files changed.
This reveals a few failing tests, so those are temporarily disabled until
they can be fixed.
Signed-off-by: David Lechner <david@pybricks.com>
Signed-off-by: Damien George <damien@micropython.org>
When compiler optimizations are enabled on the mingw version of gcc, we are
getting failing tests because of rounding issues, for example:
print(float("1e24"))
would print
9.999999999999999e+23
instead of
1e+24
It turns out special compiler options are needed to get GCC to use the SSE
instruction set instead of the 387 coprocessor (which uses 80-bit precision
internall).
Signed-off-by: David Lechner <david@pybricks.com>
Currently, only the processor's SPI2 bus is enabled (though the related
pins are labeled SPI1 in the Portenta H7 documentation). This commit
enables the processor's SPI1 bus, which is accessible via the board's
high-density connectors.
Signed-off-by: Jim Lipsey <github@lipsey.org>
This makes no difference when files are linked directly into a target
application, but on macOS additional steps are needed to index common
symbols in static libraries. See https://stackoverflow.com/a/26581710
By not creating any common symbols, this problem is bypassed.
This will also trigger linker errors if there are cases where the same
symbol is defined in the host application.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
If a return is executed within the try block of a try-finally then the
return value is stored on the top of the Python stack during the execution
of the finally block. In this case the Python stack is one larger than it
normally would be in the finally block.
Prior to this commit, the compiler was not taking this case into account
and could have a Python stack overflow if the Python stack used by the
finally block was more than that used elsewhere in the function. In such
a scenario the last argument of the function would be clobbered by the
top-most temporary value used in the deepest Python expression/statement.
This commit fixes that case by making sure enough Python stack is allocated
to the function.
Fixes issue #13562.
Signed-off-by: Damien George <damien@micropython.org>
The timing of the DMA transfer can vary a bit, so tweak the allowed values.
Also test the return value of `rp2.DMA.irq.flags()` to make sure the IRQ is
correctly signalled.
Signed-off-by: Damien George <damien@micropython.org>
stat_path is only called with stringified vstr_t objects.
Thus, pulling the stringification into the function replaces three
function calls with one, saving a few bytes.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Changes include:
- Some mbedtls source files renamed or deprecated.
- Our `mbedtls_config.h` files are renamed to `mbedtls_config_port.h`, so
they don't clash with mbedtls's new default configuration file named
`mbedtls_config.h`.
- MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE is deprecated.
- MBEDTLS_HAVE_TIME now requires an `mbedtls_ms_time` function to be
defined but it's only used for TLSv1.3 (currently not enabled in
MicroPython so there is a lazy implementation, i.e. seconds * 1000).
- `tests/multi_net/ssl_data.py` is removed (due to deprecation of
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE), there are the existing
`ssl_cert_rsa.py` and `sslcontext_server_client.py` tests which do very
similar, simple SSL data transfer.
- Tests now use an EC key by default (they are smaller and faster), and the
RSA key has been regenerated due to the old PKCS encoding used by openssl
rsa command, see
https://stackoverflow.com/questions/40822328/openssl-rsa-key-pem-and-der-conversion-does-not-match
(and `tests/README.md` has been updated accordingly).
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
Running `./do-mp.sh` now generates this `mp_mbedtls_errors.c` file. The
`esp32_mbedtls_errors.c` file is already up-to-date.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
Prior to this commit it would skip every second cipher returned from
mbedtls.
The corresponding test is also updated and now passes on esp32, rp2, stm32
and unix.
Signed-off-by: Damien George <damien@micropython.org>
This simplifes the port configuration. It enables quite a few new
features, including the `math` and `cmath` modules, adding about 20k to the
firmware size.
Signed-off-by: Damien George <damien@micropython.org>
This is not enabled on any other MCU port, and is essentially unused on
esp8266 because mp_verbose_flag is always 0. Disabling saves ~7k of flash.
Signed-off-by: Damien George <damien@micropython.org>
The standard Arduino pinout uses LEDR/G/B and LED_BUILTIN (if available).
This patch adds aliases to match the standard pinout, while retaining
LED_RED/GREEN/BLUE for compatibility with existing scripts and examples.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This will apply to bare-arm and minimal, as well as the minimal unix
variant.
Change the default to MICROPY_QSTR_BYTES_IN_HASH=1 for the CORE,BASIC
levels, 2 for >=EXTRA.
Removes explicit setting of MICROPY_QSTR_BYTES_IN_HASH==1 in ports that
don't set the feature level (because 1 is implied by the default level,
CORE). Applies to cc3200, pic16bt, powerpc.
Removes explicit setting for nRF (which sets feature level). Also for samd,
which sets CORE for d21 and FULL for d51. This means that d21 is unchanged
with MICROPY_QSTR_BYTES_IN_HASH==1, but d51 now moves from 1 to 2 (roughly
adds 1kiB).
The only remaining port which explicitly set bytes-in-hash is rp2 because
it's high-flash (hence CORE level) but lowish-SRAM, so it's worthwhile
saving the RAM for runtime qstrs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Sets MICROPY_QSTR_BYTES_IN_HASH==0 on stm32x0 boards.
This saves e.g. 2kiB on NUCLEO_F091.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This disables using qstr hashes altogether, which saves RAM and flash
(two bytes per interned string on a typical build) as well as code size.
On PYBV11 this is worth over 3k flash.
qstr comparison will now be done just by length then data. This affects
qstr_find_strn although this has a negligible performance impact as, for a
given comparison, the length and first character will ~usually be
different anyway.
String hashing (e.g. builtin `hash()` and map.c) now need to compute the
hash dynamically, and for the map case this does come at a performance
cost.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Required modifying the gen-cpydiff.py code to allow a "preamble" section to
be inserted at the top of any of the generated files.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This reverts the change from ce2058685b.
Without abspath, the build artefacts (object files) for boards with source
files are placed outside the build directory, because the BOARD_DIR
variable starts with "..". For the list of source files added to SRC_C,
none of them can start with "..". The usual fix for that would be to make
the files relative to the top of the MicroPython repo (because of the vpath
rule), eg ports/stm32/boards/$(BOARD). But then the $(wildcard ...)
pattern won't find files in this directory.
So abspath is necessary, although it will prevent building when there is a
space in the path. A better solution for spaces needs to be found.
Signed-off-by: Damien George <damien@micropython.org>
These were added back in commit c4935f3049
because the tests required CPython 3.8, which was quite new at the time.
But CPython 3.8 was released over 4 years ago (October 2019) and the CI
test runners, and developers, have this (or a more recent) CPython version.
Removing the .exp files also helps keep MicroPython semantics the same as
CPython.
The asyncio_fair.py test it adjusted slightly to have more deterministic
timing and output.
Signed-off-by: Damien George <damien@micropython.org>
Make can't handle paths with spaces, see https://savannah.gnu.org/bugs/?712
The following workarounds exist:
- When using make's built-in functions:
- Use relative paths wherever possible to avoid spaces in the first
place.
- All spaces in paths can be escaped with backslashes; quotes don't
work.
- Some users use the shell to temporarily rename directories, or to
create symlinks without spaces.
- When using make to pass commands to the system's shell, enclose paths in
quotes. While make will still interpret quoted strings with spaces as
multiple words, the system's shell will correctly parse the resulting
command.
This commit contains the following fixes:
- In ports/stm32/mboot/Makefile: Use relative paths to avoid spaces when
using built-in functions.
- In all other files: Use quotes to enclose paths when make is used to call
shell functions.
All changes have been tested with a directory containing spaces.
Signed-off-by: Iksas <iksas@mailbox.org>
The irq service routine cleared the RT interrupt bit on TX interrupt. This
opens the possibility that an RT interrupt is missed.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
Angus Gratton