11 Commity (0e49642965d839fe4c9d6751acd8dc1b57652c1f)

Autor	SHA1	Wiadomość	Data
Damien George	09d207785c	stmhal: Unify naming of HW config; make SD detect configurable. ... All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.	2014-03-30 12:30:35 +01:00
Dave Hylands	1403298a65	stmhal - fixed up adc stuff ... Added support for the ADC channels and mappings to make_pins.py I'm not sure if the hal properly deals with the channel 16/18 differences between the 40x and 42x. It seems to deal with it partially. This particular aspect will need testing on a 42x or 43x.	2014-03-24 11:16:35 -07:00
Damien George	b13492f8ad	stmhal: Add DAC driver.	2014-03-24 15:15:33 +00:00
Damien George	965e2bafea	stmhal: Improve LED intensity get/set method.	2014-03-23 00:25:09 +00:00
Damien George	684164a8cf	stmhal: Add PYBv10 config; add RNG support.	2014-03-22 13:41:02 +00:00
Dave Hylands	ca5444e6cd	stmhal - add pin mapping, gpio, exti, usrsw	2014-03-14 23:41:28 -07:00
Dave Hylands	0a64c92a9c	stmhal - add led support. Add netduino_plus_2 support ... Tweaked a couple of the USB files to compile if neither dev nor host was defined. Tested on netduiono plus 2 and stm32f4discovery boards	2014-03-14 09:48:49 -07:00
Damien George	b30c02afa0	stmhal: Get USB enumerating a CDC device. ... Enumerates CDC device over USB, but doesn't transmit/receive yet.	2014-03-14 00:30:37 +00:00
Dave Hylands	f14b92b9e1	REPl working on UART6 with STMHAL	2014-03-12 18:15:55 -07:00
Damien George	4ef1dbcbf6	stmhal: Get SysTick and HSE working.	2014-03-12 21:59:33 +00:00
Dave Hylands	dd38d90724	Initial checkin with STM HAL ... This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything.	2014-03-11 23:55:41 -07:00