micropython

Wykres commitów

Autor	SHA1	Wiadomość	Data
iabdalkader	805c750164	mimxrt/mimxrt_sdram: Allow boards to override the default SDRAM config. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>	2023-09-29 23:08:48 +10:00
robert-hh	5e990cc27f	mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.	2022-11-17 14:11:50 +11:00
Philipp Ebensberger	7e62c9707a	mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger	2021-10-22 08:23:24 +02:00

Autor

SHA1

Wiadomość

Data

iabdalkader

805c750164

mimxrt/mimxrt_sdram: Allow boards to override the default SDRAM config.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>

2023-09-29 23:08:48 +10:00

robert-hh

5e990cc27f

mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board.

The RT1176 has two cores, but the actual firmware supports only the CM7.
There are currently no good plans on how to use the CM4.

The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards,
with the following extensions:
- Use 64 MB RAM for the heap.
- Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1)
  being the 1GB interface.

The dual LAN port interface can eventually be adapted as well for the
RT1062 MCU.

This work was done in collaboration with @alphaFred.

2022-11-17 14:11:50 +11:00

Philipp Ebensberger

7e62c9707a

mimxrt/sdram: Add SDRAM support.

Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be
enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL`
to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`.

When SDRAM support is enabled the whole SDRAM is currently used used
for MicroPython heap.

Signed-off-by: Philipp Ebensberger

2021-10-22 08:23:24 +02:00

3 Commity (master)