From c68c327310c14f1db6baeaec59b4c4dae19ce377 Mon Sep 17 00:00:00 2001 From: Paul Sokolovsky Date: Tue, 3 May 2016 18:40:16 +0300 Subject: [PATCH] docs/esp8266/tutorial/repl: Reword description of initial WebREPL setup a bit. --- docs/esp8266/tutorial/repl.rst | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/docs/esp8266/tutorial/repl.rst b/docs/esp8266/tutorial/repl.rst index 21a82dcec0..078f31357c 100644 --- a/docs/esp8266/tutorial/repl.rst +++ b/docs/esp8266/tutorial/repl.rst @@ -52,9 +52,12 @@ by default the IP address is correct when connected to the ESP8266's access point). If the connection succeeds then you should see a welcome message. On the first connection you need to set a password. Make sure that the -terminal widget is selected by clicking on it, and then type it your password -twice (they should match each other). Then ESP8266 will then reboot with -the password applied (the WiFi will go down but come back up again). +terminal widget is selected by clicking on it, and then follow prompts to +type in your password twice (they should match each other). Then ESP8266 +will then reboot with the password applied (the WiFi will go down but come +back up again). Note that some modules may have troubles rebooting +automatically and need reset button press or power cycle (do this if +you don't see ESP8266 access point appearing in a minute or so). You should then click the "Connect" button again, and enter your password to connect. If you type in the correct password you should get a prompt