stmhal: Add define for UNIQUE_ID address (differs per MCU)

stmhal/modmachine.c

@@ -38,13 +38,14 @@
 #include "pin.h"
 #include "timer.h"
 #include "usb.h"
+#include MICROPY_HAL_H
 
 // machine.info([dump_alloc_table])
 // Print out lots of information about the board.
 STATIC mp_obj_t machine_info(mp_uint_t n_args, const mp_obj_t *args) {
     // get and print unique id; 96 bits
     {
-        byte *id = (byte*)0x1fff7a10;
+        byte *id = (byte*)MP_HAL_UNIQUE_ID_ADDRESS;
         printf("ID=%02x%02x%02x%02x:%02x%02x%02x%02x:%02x%02x%02x%02x\n", id[0], id[1], id[2], id[3], id[4], id[5], id[6], id[7], id[8], id[9], id[10], id[11]);
     }
 

stmhal/mphal.h

@@ -1,6 +1,16 @@
 // We use the ST Cube HAL library for most hardware peripherals
 #include STM32_HAL_H
 
+// The unique id address differs per MCU.  Ideally this define should
+// go in some MCU-specific header, but for now it lives here.
+#if defined(MCU_SERIES_F4)
+#define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7a10)
+#elif defined(MCU_SERIES_F7)
+#define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff0f420)
+#else
+#error mphal.h: Unrecognized MCU_SERIES
+#endif
+
 // Basic GPIO functions
 #define GPIO_read_pin(gpio, pin)        (((gpio)->IDR >> (pin)) & 1)
 #if defined(MCU_SERIES_F7)

stmhal/usbd_desc.c

@@ -33,6 +33,10 @@
 #include "usbd_desc.h"
 #include "usbd_conf.h"
 
+// need these headers just for MP_HAL_UNIQUE_ID_ADDRESS
+#include "py/misc.h"
+#include MICROPY_HAL_H
+
 // So we don't clash with existing ST boards, we use the unofficial FOSS VID.
 // This needs a proper solution.
 #define USBD_VID                      0xf055
@@ -169,7 +173,7 @@ STATIC uint8_t *USBD_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *leng
     //
     // See: https://my.st.com/52d187b7 for the algorithim used.
 
-    uint8_t *id = (uint8_t *)0x1fff7a10;
+    uint8_t *id = (uint8_t *)MP_HAL_UNIQUE_ID_ADDRESS;
     char serial_buf[16];
     snprintf(serial_buf, sizeof(serial_buf),
         "%02X%02X%02X%02X%02X%02X",