kopia lustrzana https://github.com/micropython/micropython
samd/machine_bitstream: Add the machine.bitstream() function.
The SAMD21 implementation is an adaption of @jimmo's code for STM32Lxx. The only changes are the addresses and names of the port registers and the timing parameters. SAMD21: The precision is about +/-25ns at 48MHz clock frequency. The first two cycles are about 40-60 ns longer than set. But still good enough to drive a neopixel device. SAMD51: The precision is about +/-30ns at 120MHz clock frequency. Good enough to drive a neopixel device.pull/9534/head
robert-hh
Damien George
rodzic
fd7b57dd22
commit
a415752173
|
|
@ -87,10 +87,11 @@ LIBSTDCPP_FILE_NAME = "$(shell $(CXX) $(CXXFLAGS) -print-file-name=libstdc++.a)"
|
|||
LDFLAGS += -L"$(shell dirname $(LIBSTDCPP_FILE_NAME))"
|
||||
endif
|
||||
|
||||
SRC_C = \
|
||||
SRC_C += \
|
||||
clock_config.c \
|
||||
help.c \
|
||||
machine_adc.c \
|
||||
machine_bitstream.c \
|
||||
machine_dac.c \
|
||||
machine_i2c.c \
|
||||
machine_led.c \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,206 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021 Jim Mussared
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
// This is a translation of the cycle counter implementation in ports/stm32/machine_bitstream.c.
|
||||
|
||||
#include "py/mpconfig.h"
|
||||
#include "py/mphal.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
#if MICROPY_PY_MACHINE_BITSTREAM
|
||||
|
||||
#if __CORTEX_M == 0
|
||||
|
||||
// No cycle counter on M0, do manual cycle counting instead.
|
||||
|
||||
// STM32F091 @ 48MHz
|
||||
#define NS_CYCLES_PER_ITER_HIGH (3)
|
||||
#define NS_CYCLES_PER_ITER_LOW (3)
|
||||
#define NS_OVERHEAD_CYCLES_HIGH (12)
|
||||
#define NS_OVERHEAD_CYCLES_LOW (15)
|
||||
|
||||
uint32_t mp_hal_delay_ns_calc(uint32_t ns, bool high) {
|
||||
uint32_t ncycles = (get_cpu_freq() / 1000000 * ns + 500) / 1000; // + 500 for proper rounding
|
||||
uint32_t overhead = MIN(ncycles, high ? NS_OVERHEAD_CYCLES_HIGH : NS_OVERHEAD_CYCLES_LOW);
|
||||
return MAX(1, MP_ROUND_DIVIDE(ncycles - overhead, high ? NS_CYCLES_PER_ITER_HIGH : NS_CYCLES_PER_ITER_LOW));
|
||||
}
|
||||
|
||||
void machine_bitstream_high_low(mp_hal_pin_obj_t pin, uint32_t *timing_ns, const uint8_t *buf, size_t len) {
|
||||
volatile const uint32_t mask = 1 << (pin % 32);
|
||||
volatile uint32_t *outclr = &PORT->Group[pin / 32].OUTCLR.reg;
|
||||
volatile uint32_t *outset = &PORT->Group[pin / 32].OUTSET.reg;
|
||||
|
||||
// Convert ns to loop iterations [high_time_0, low_time_0, high_time_1, low_time_1].
|
||||
for (size_t i = 0; i < 4; ++i) {
|
||||
timing_ns[i] = mp_hal_delay_ns_calc(timing_ns[i], i % 2 == 0);
|
||||
}
|
||||
|
||||
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
|
||||
|
||||
// Measured timing for SAMD21 at 48MHz (cycle=20.83ns)
|
||||
// timing_ns = (1,1,1,1)
|
||||
// high: 310
|
||||
// low: 375
|
||||
// high0: 375
|
||||
// low0: 400
|
||||
// timing_ns = (500, 500, 500, 500)
|
||||
// high: 500
|
||||
// low: 500
|
||||
// high0: 565
|
||||
// low0: 540
|
||||
// timing_ns = (1000, 1000, 1000, 1000)
|
||||
// high: 1000
|
||||
// low: 1000
|
||||
// high0: 1065
|
||||
// low0: 1040
|
||||
|
||||
// --> high is 12 + n*3 cycles
|
||||
// low is 15 + n*3 cycles
|
||||
|
||||
// NeoPixel timing (400, 850, 800, 450) (+/-150ns) gives timing_ns=(2, 9, 8, 3) which in cycles is
|
||||
// (12 + 6, 15 + 27, 15 + 24, 12 + 9) = (18, 42, 39, 21)
|
||||
// --> (375, 875, 812, 437) nanoseconds.
|
||||
// Measured output on logic analyser is (375, 875, 815, 435) (+/-5ns at 200MHz)
|
||||
|
||||
// Note: the first high/low cycle is longer by 2-3 cycles (40-60ns).
|
||||
// This is slightly outside spec, but doesn't seem to cause a problem.
|
||||
|
||||
__asm volatile (
|
||||
// Force consistent register assignment.
|
||||
// r6 = len
|
||||
"ldr r6, %0\n"
|
||||
// r4 = buf
|
||||
"ldr r4, %1\n"
|
||||
// r5 = timing_ms
|
||||
"ldr r5, %2\n"
|
||||
|
||||
// Must align for consistent timing.
|
||||
".align 4\n"
|
||||
|
||||
// Don't increment/decrement before first iteration.
|
||||
"b .outer2\n"
|
||||
".outer:\n"
|
||||
// ++buf, --len
|
||||
" add r4, #1\n"
|
||||
" sub r6, #1\n"
|
||||
|
||||
// len iterations
|
||||
".outer2:\n"
|
||||
" cmp r6, #0\n"
|
||||
" beq .done\n"
|
||||
|
||||
// r0 = *buf
|
||||
" ldrb r0, [r4, #0]\n"
|
||||
|
||||
// 8 bits in byte
|
||||
" mov r7, #8\n"
|
||||
" .inner:\n"
|
||||
// *outset = mask
|
||||
" ldr r2, %3\n"
|
||||
" ldr r1, %5\n"
|
||||
" str r1, [r2, #0]\n"
|
||||
|
||||
// r3 = (r0 >> 4) & 8 (r0 is 8 if high bit is 1 else 0)
|
||||
" mov r8, r6\n"
|
||||
" lsr r3, r0, #4\n"
|
||||
" mov r6, #8\n"
|
||||
" and r3, r6\n"
|
||||
" mov r6, r8\n"
|
||||
|
||||
// r2 = timing_ns[r2]
|
||||
" ldr r2, [r5, r3]\n"
|
||||
" .loop1:\n sub r2, #1\n bne .loop1\n"
|
||||
|
||||
// *outclr = mask
|
||||
" ldr r2, %4\n"
|
||||
" str r1, [r2, #0]\n"
|
||||
|
||||
// r2 = timing_ns[r3 + 4]
|
||||
" add r3, #4\n"
|
||||
" ldr r2, [r5, r3]\n"
|
||||
" .loop2:\n sub r2, #1\n bne .loop2\n"
|
||||
|
||||
// b >>= 1
|
||||
" lsl r0, r0, #1\n"
|
||||
|
||||
" sub r7, #1\n"
|
||||
// end of inner loop
|
||||
" beq .outer\n"
|
||||
// continue inner loop
|
||||
" b .inner\n"
|
||||
|
||||
".done:\n"
|
||||
:
|
||||
: "m" (len), "m" (buf), "m" (timing_ns), "m" (outset), "m" (outclr), "m" (mask)
|
||||
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8"
|
||||
);
|
||||
|
||||
MICROPY_END_ATOMIC_SECTION(atomic_state);
|
||||
}
|
||||
|
||||
#else // > CORTEX_M0
|
||||
|
||||
#define NS_TICKS_OVERHEAD (70)
|
||||
|
||||
void machine_bitstream_high_low(mp_hal_pin_obj_t pin, uint32_t *timing_ns, const uint8_t *buf, size_t len) {
|
||||
uint32_t fcpu_mhz = get_cpu_freq() / 1000000;
|
||||
uint32_t ticks_overhead = fcpu_mhz * NS_TICKS_OVERHEAD / 1000;
|
||||
// Convert ns to us ticks [high_time_0, period_0, high_time_1, period_1].
|
||||
for (size_t i = 0; i < 4; ++i) {
|
||||
timing_ns[i] = fcpu_mhz * timing_ns[i] / 1000;
|
||||
if (timing_ns[i] > ticks_overhead) {
|
||||
timing_ns[i] -= ticks_overhead;
|
||||
}
|
||||
if (i % 2 == 1) {
|
||||
// Convert low_time to period (i.e. add high_time).
|
||||
timing_ns[i] += timing_ns[i - 1] - ticks_overhead;
|
||||
}
|
||||
}
|
||||
|
||||
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
|
||||
DWT->CYCCNT = 0;
|
||||
|
||||
for (size_t i = 0; i < len; ++i) {
|
||||
uint8_t b = buf[i];
|
||||
for (size_t j = 0; j < 8; ++j) {
|
||||
uint32_t start_ticks = mp_hal_ticks_cpu();
|
||||
uint32_t *t = &timing_ns[b >> 6 & 2];
|
||||
mp_hal_pin_high(pin);
|
||||
while ((mp_hal_ticks_cpu() - start_ticks) < t[0]) {
|
||||
}
|
||||
b <<= 1;
|
||||
mp_hal_pin_low(pin);
|
||||
while ((mp_hal_ticks_cpu() - start_ticks) < t[1]) {
|
||||
}
|
||||
}
|
||||
}
|
||||
MICROPY_END_ATOMIC_SECTION(atomic_state);
|
||||
|
||||
}
|
||||
|
||||
#endif // > CORTEX_M0
|
||||
|
||||
#endif // MICROPY_PY_MACHINE_BITSTREAM
|
||||
|
|
@ -25,6 +25,7 @@
|
|||
*/
|
||||
|
||||
#include "py/runtime.h"
|
||||
#include "extmod/machine_bitstream.h"
|
||||
#include "extmod/machine_mem.h"
|
||||
#include "extmod/machine_pulse.h"
|
||||
#include "extmod/machine_i2c.h"
|
||||
|
|
@ -167,6 +168,7 @@ STATIC const mp_rom_map_elem_t machine_module_globals_table[] = {
|
|||
{ MP_ROM_QSTR(MP_QSTR_disable_irq), MP_ROM_PTR(&machine_disable_irq_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_enable_irq), MP_ROM_PTR(&machine_enable_irq_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_time_pulse_us), MP_ROM_PTR(&machine_time_pulse_us_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_bitstream), MP_ROM_PTR(&machine_bitstream_obj) },
|
||||
};
|
||||
STATIC MP_DEFINE_CONST_DICT(machine_module_globals, machine_module_globals_table);
|
||||
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
#define MICROPY_PY_MACHINE_SPI (1)
|
||||
#define MICROPY_PY_MACHINE_SOFTSPI (1)
|
||||
#define MICROPY_PY_OS_DUPTERM (3)
|
||||
#define MICROPY_PY_MACHINE_BITSTREAM (1)
|
||||
#define MICROPY_PY_MACHINE_PULSE (1)
|
||||
#define MICROPY_PY_MACHINE_PWM (1)
|
||||
#define MICROPY_PY_MACHINE_PWM_INIT (0)
|
||||
|
|
|
|||
|
|
@ -71,11 +71,11 @@ static inline mp_uint_t mp_hal_ticks_us(void) {
|
|||
#endif
|
||||
}
|
||||
|
||||
#if defined (MCU_SAMD21)
|
||||
#if defined(MCU_SAMD21)
|
||||
|
||||
#define mp_hal_ticks_cpu mp_hal_ticks_us
|
||||
|
||||
#elif defined (MCU_SAMD51)
|
||||
#elif defined(MCU_SAMD51)
|
||||
static inline void mp_hal_ticks_cpu_enable(void) {
|
||||
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
||||
DWT->CYCCNT = 0;
|
||||
|
|
|
|||
|
|
@ -111,7 +111,7 @@ void samd_init(void) {
|
|||
SysTick_Config(get_cpu_freq() / 1000);
|
||||
init_us_counter();
|
||||
usb_init();
|
||||
#if defined (MCU_SAMD51)
|
||||
#if defined(MCU_SAMD51)
|
||||
mp_hal_ticks_cpu_enable();
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue