stm32/spibdev: Update to work with new spiflash driver.

ports/stm32/spibdev.c

@@ -25,6 +25,8 @@
  */
 
 #include "py/obj.h"
+#include "systick.h"
+#include "led.h"
 #include "storage.h"
 
 #if defined(MICROPY_HW_SPIFLASH_SIZE_BITS)
@@ -32,6 +34,8 @@
 #include "drivers/memory/spiflash.h"
 #include "genhdr/pins.h"
 
+static uint32_t flash_tick_counter_last_write;
+
 STATIC const mp_machine_soft_spi_obj_t spiflash_spi_bus = {
     .base = {&mp_machine_soft_spi_type},
     .delay_half = MICROPY_PY_MACHINE_SPI_MIN_DELAY,
@@ -42,22 +46,42 @@ STATIC const mp_machine_soft_spi_obj_t spiflash_spi_bus = {
     .miso = &MICROPY_HW_SPIFLASH_MISO,
 };
 
-STATIC const mp_spiflash_t spiflash = {
-    .cs = &MICROPY_HW_SPIFLASH_CS,
-    .spi = (mp_obj_base_t*)&spiflash_spi_bus.base,
+STATIC const mp_spiflash_config_t spiflash_config = {
+    .bus_kind = MP_SPIFLASH_BUS_SPI,
+    .bus.u_spi.cs = &MICROPY_HW_SPIFLASH_CS,
+    .bus.u_spi.data = (void*)&spiflash_spi_bus,
+    .bus.u_spi.proto = &mp_machine_soft_spi_p,
 };
 
+STATIC mp_spiflash_t spiflash;
+
 void spi_bdev_init(void) {
-    mp_spiflash_init((mp_spiflash_t*)&spiflash);
+    spiflash.config = &spiflash_config;
+    mp_spiflash_init(&spiflash);
+    flash_tick_counter_last_write = 0;
+}
+
+void spi_bdev_irq_handler(void) {
+    if ((spiflash.flags & 1) && sys_tick_has_passed(flash_tick_counter_last_write, 1000)) {
+        mp_spiflash_flush(&spiflash);
+        led_state(PYB_LED_RED, 0); // indicate a clean cache with LED off
+    }
+}
+
+void spi_bdev_flush(void) {
+    if (spiflash.flags & 1) {
+        // we must disable USB irqs to prevent MSC contention with SPI flash
+        uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
+        mp_spiflash_flush(&spiflash);
+        led_state(PYB_LED_RED, 0); // indicate a clean cache with LED off
+        restore_irq_pri(basepri);
+    }
 }
 
 bool spi_bdev_readblock(uint8_t *dest, uint32_t block) {
     // we must disable USB irqs to prevent MSC contention with SPI flash
     uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
-
-    mp_spiflash_read((mp_spiflash_t*)&spiflash,
-        block * FLASH_BLOCK_SIZE, FLASH_BLOCK_SIZE, dest);
-
+    mp_spiflash_read(&spiflash, block * FLASH_BLOCK_SIZE, FLASH_BLOCK_SIZE, dest);
     restore_irq_pri(basepri);
 
     return true;
@@ -66,10 +90,11 @@ bool spi_bdev_readblock(uint8_t *dest, uint32_t block) {
 bool spi_bdev_writeblock(const uint8_t *src, uint32_t block) {
     // we must disable USB irqs to prevent MSC contention with SPI flash
     uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
-
-    int ret = mp_spiflash_write((mp_spiflash_t*)&spiflash,
-        block * FLASH_BLOCK_SIZE, FLASH_BLOCK_SIZE, src);
-
+    int ret = mp_spiflash_write(&spiflash, block * FLASH_BLOCK_SIZE, FLASH_BLOCK_SIZE, src);
+    if (spiflash.flags & 1) {
+        led_state(PYB_LED_RED, 1); // indicate a dirty cache with LED on
+        flash_tick_counter_last_write = HAL_GetTick();
+    }
     restore_irq_pri(basepri);
 
     return ret == 0;

ports/stm32/storage.c

@@ -39,6 +39,8 @@
 // Use external SPI flash as the storage medium
 #define BDEV_NUM_BLOCKS (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE)
 #define BDEV_INIT spi_bdev_init
+#define BDEV_IRQ_HANDLER spi_bdev_irq_handler
+#define BDEV_FLUSH spi_bdev_flush
 #define BDEV_READBLOCK spi_bdev_readblock
 #define BDEV_WRITEBLOCK spi_bdev_writeblock
 

ports/stm32/storage.h

@@ -51,6 +51,8 @@ bool flash_bdev_readblock(uint8_t *dest, uint32_t block);
 bool flash_bdev_writeblock(const uint8_t *src, uint32_t block);
 
 void spi_bdev_init(void);
+void spi_bdev_irq_handler(void);
+void spi_bdev_flush(void);
 bool spi_bdev_readblock(uint8_t *dest, uint32_t block);
 bool spi_bdev_writeblock(const uint8_t *src, uint32_t block);