kopia lustrzana https://github.com/micropython/micropython
drivers/onewire: Move onewire.py, ds18x20.py from esp8266 to drivers.
These drivers can now be used by any port (so long as that port has the _onewire driver from extmod/modonewire.c). These drivers replace the existing 1-wire and DS18X20 drivers in the drivers/onewire directory. The existing ones were pyboard-specific and not very efficient nor minimal (although the 1-wire driver was written in pure Python it only worked at large enough CPU frequency). This commit brings backwards incompatible API changes to the existing 1-wire drivers. User code should be converted to use the new drivers, or check out the old version of the code and keep a local copy (it should continue to work unchanged).pull/3165/head
Damien George
rodzic
b19138e82e
commit
a065d78675
|
|
@ -1,101 +1,51 @@
|
|||
"""
|
||||
DS18x20 temperature sensor driver for MicroPython.
|
||||
# DS18x20 temperature sensor driver for MicroPython.
|
||||
# MIT license; Copyright (c) 2016 Damien P. George
|
||||
|
||||
This driver uses the OneWire driver to control DS18S20 and DS18B20
|
||||
temperature sensors. It supports multiple devices on the same 1-wire bus.
|
||||
from micropython import const
|
||||
|
||||
The following example assumes the ground of your DS18x20 is connected to
|
||||
Y11, vcc is connected to Y9 and the data pin is connected to Y10.
|
||||
_CONVERT = const(0x44)
|
||||
_RD_SCRATCH = const(0xbe)
|
||||
_WR_SCRATCH = const(0x4e)
|
||||
|
||||
>>> from machine import Pin
|
||||
>>> gnd = Pin('Y11', Pin.OUT_PP)
|
||||
>>> gnd.off()
|
||||
>>> vcc = Pin('Y9', Pin.OUT_PP)
|
||||
>>> vcc.on()
|
||||
class DS18X20:
|
||||
def __init__(self, onewire):
|
||||
self.ow = onewire
|
||||
self.buf = bytearray(9)
|
||||
|
||||
>>> from ds18x20 import DS18X20
|
||||
>>> d = DS18X20(Pin('Y10'))
|
||||
def scan(self):
|
||||
return [rom for rom in self.ow.scan() if rom[0] == 0x10 or rom[0] == 0x28]
|
||||
|
||||
Call read_temps to read all sensors:
|
||||
def convert_temp(self):
|
||||
self.ow.reset(True)
|
||||
self.ow.writebyte(self.ow.SKIP_ROM)
|
||||
self.ow.writebyte(_CONVERT)
|
||||
|
||||
>>> result = d.read_temps()
|
||||
>>> print(result)
|
||||
[20.875, 20.8125]
|
||||
def read_scratch(self, rom):
|
||||
self.ow.reset(True)
|
||||
self.ow.select_rom(rom)
|
||||
self.ow.writebyte(_RD_SCRATCH)
|
||||
self.ow.readinto(self.buf)
|
||||
if self.ow.crc8(self.buf):
|
||||
raise Exception('CRC error')
|
||||
return self.buf
|
||||
|
||||
Call read_temp to read the temperature of a specific sensor:
|
||||
def write_scratch(self, rom, buf):
|
||||
self.ow.reset(True)
|
||||
self.ow.select_rom(rom)
|
||||
self.ow.writebyte(_WR_SCRATCH)
|
||||
self.ow.write(buf)
|
||||
|
||||
>>> result = d.read_temp(d.roms[0])
|
||||
>>> print(result)
|
||||
20.25
|
||||
|
||||
If only one DS18x20 is attached to the bus, then you don't need to
|
||||
pass a ROM to read_temp:
|
||||
|
||||
>>> result = d.read_temp()
|
||||
>>> print(result)
|
||||
20.25
|
||||
|
||||
"""
|
||||
|
||||
from onewire import OneWire
|
||||
|
||||
class DS18X20(object):
|
||||
def __init__(self, pin):
|
||||
self.ow = OneWire(pin)
|
||||
# Scan the 1-wire devices, but only keep those which have the
|
||||
# correct # first byte in their rom for a DS18x20 device.
|
||||
self.roms = [rom for rom in self.ow.scan() if rom[0] == 0x10 or rom[0] == 0x28]
|
||||
|
||||
def read_temp(self, rom=None):
|
||||
"""
|
||||
Read and return the temperature of one DS18x20 device.
|
||||
Pass the 8-byte bytes object with the ROM of the specific device you want to read.
|
||||
If only one DS18x20 device is attached to the bus you may omit the rom parameter.
|
||||
"""
|
||||
rom = rom or self.roms[0]
|
||||
ow = self.ow
|
||||
ow.reset()
|
||||
ow.select_rom(rom)
|
||||
ow.write_byte(0x44) # Convert Temp
|
||||
while True:
|
||||
if ow.read_bit():
|
||||
break
|
||||
ow.reset()
|
||||
ow.select_rom(rom)
|
||||
ow.write_byte(0xbe) # Read scratch
|
||||
data = ow.read_bytes(9)
|
||||
return self.convert_temp(rom[0], data)
|
||||
|
||||
def read_temps(self):
|
||||
"""
|
||||
Read and return the temperatures of all attached DS18x20 devices.
|
||||
"""
|
||||
temps = []
|
||||
for rom in self.roms:
|
||||
temps.append(self.read_temp(rom))
|
||||
return temps
|
||||
|
||||
def convert_temp(self, rom0, data):
|
||||
"""
|
||||
Convert the raw temperature data into degrees celsius and return as a float.
|
||||
"""
|
||||
temp_lsb = data[0]
|
||||
temp_msb = data[1]
|
||||
if rom0 == 0x10:
|
||||
if temp_msb != 0:
|
||||
# convert negative number
|
||||
temp_read = temp_lsb >> 1 | 0x80 # truncate bit 0 by shifting, fill high bit with 1.
|
||||
temp_read = -((~temp_read + 1) & 0xff) # now convert from two's complement
|
||||
def read_temp(self, rom):
|
||||
buf = self.read_scratch(rom)
|
||||
if rom[0] == 0x10:
|
||||
if buf[1]:
|
||||
t = buf[0] >> 1 | 0x80
|
||||
t = -((~t + 1) & 0xff)
|
||||
else:
|
||||
temp_read = temp_lsb >> 1 # truncate bit 0 by shifting
|
||||
count_remain = data[6]
|
||||
count_per_c = data[7]
|
||||
temp = temp_read - 0.25 + (count_per_c - count_remain) / count_per_c
|
||||
return temp
|
||||
elif rom0 == 0x28:
|
||||
temp = (temp_msb << 8 | temp_lsb) / 16
|
||||
if (temp_msb & 0xf8) == 0xf8: # for negative temperature
|
||||
temp -= 0x1000
|
||||
return temp
|
||||
t = buf[0] >> 1
|
||||
return t - 0.25 + (buf[7] - buf[6]) / buf[7]
|
||||
else:
|
||||
assert False
|
||||
t = buf[1] << 8 | buf[0]
|
||||
if t & 0x8000: # sign bit set
|
||||
t = -((t ^ 0xffff) + 1)
|
||||
return t / 16
|
||||
|
|
|
|||
|
|
@ -1,336 +1,91 @@
|
|||
"""
|
||||
OneWire library ported to MicroPython by Jason Hildebrand.
|
||||
# 1-Wire driver for MicroPython
|
||||
# MIT license; Copyright (c) 2016 Damien P. George
|
||||
|
||||
from micropython import const
|
||||
import _onewire as _ow
|
||||
|
||||
TODO:
|
||||
* implement and test parasite-power mode (as an init option)
|
||||
* port the crc checks
|
||||
|
||||
The original upstream copyright and terms follow.
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
Copyright (c) 2007, Jim Studt (original old version - many contributors since)
|
||||
|
||||
OneWire has been maintained by Paul Stoffregen (paul@pjrc.com) since
|
||||
January 2010.
|
||||
|
||||
26 Sept 2008 -- Robin James
|
||||
|
||||
Jim Studt's original library was modified by Josh Larios.
|
||||
|
||||
Tom Pollard, pollard@alum.mit.edu, contributed around May 20, 2008
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining
|
||||
a copy of this software and associated documentation files (the
|
||||
"Software"), to deal in the Software without restriction, including
|
||||
without limitation the rights to use, copy, modify, merge, publish,
|
||||
distribute, sublicense, and/or sell copies of the Software, and to
|
||||
permit persons to whom the Software is furnished to do so, subject to
|
||||
the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be
|
||||
included in all copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
||||
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
|
||||
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
|
||||
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
|
||||
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
|
||||
Much of the code was inspired by Derek Yerger's code, though I don't
|
||||
think much of that remains. In any event that was..
|
||||
(copyleft) 2006 by Derek Yerger - Free to distribute freely.
|
||||
"""
|
||||
|
||||
import pyb
|
||||
from pyb import disable_irq
|
||||
from pyb import enable_irq
|
||||
class OneWireError(Exception):
|
||||
pass
|
||||
|
||||
class OneWire:
|
||||
SEARCH_ROM = const(0xf0)
|
||||
MATCH_ROM = const(0x55)
|
||||
SKIP_ROM = const(0xcc)
|
||||
|
||||
def __init__(self, pin):
|
||||
"""
|
||||
Pass the data pin connected to your one-wire device(s), for example Pin('X1').
|
||||
The one-wire protocol allows for multiple devices to be attached.
|
||||
"""
|
||||
self.data_pin = pin
|
||||
self.write_delays = (1, 40, 40, 1)
|
||||
self.read_delays = (1, 1, 40)
|
||||
self.pin = pin
|
||||
self.pin.init(pin.OPEN_DRAIN)
|
||||
|
||||
# cache a bunch of methods and attributes. This is necessary in _write_bit and
|
||||
# _read_bit to achieve the timing required by the OneWire protocol.
|
||||
self.cache = (pin.init, pin.value, pin.OUT_PP, pin.IN, pin.PULL_UP)
|
||||
def reset(self, required=False):
|
||||
reset = _ow.reset(self.pin)
|
||||
if required and not reset:
|
||||
raise OneWireError
|
||||
return reset
|
||||
|
||||
pin.init(pin.IN, pin.PULL_UP)
|
||||
def readbit(self):
|
||||
return _ow.readbit(self.pin)
|
||||
|
||||
def reset(self):
|
||||
"""
|
||||
Perform the onewire reset function.
|
||||
Returns 1 if a device asserted a presence pulse, 0 otherwise.
|
||||
def readbyte(self):
|
||||
return _ow.readbyte(self.pin)
|
||||
|
||||
If you receive 0, then check your wiring and make sure you are providing
|
||||
power and ground to your devices.
|
||||
"""
|
||||
retries = 25
|
||||
self.data_pin.init(self.data_pin.IN, self.data_pin.PULL_UP)
|
||||
def readinto(self, buf):
|
||||
for i in range(len(buf)):
|
||||
buf[i] = _ow.readbyte(self.pin)
|
||||
|
||||
# We will wait up to 250uS for
|
||||
# the bus to come high, if it doesn't then it is broken or shorted
|
||||
# and we return a 0;
|
||||
def writebit(self, value):
|
||||
return _ow.writebit(self.pin, value)
|
||||
|
||||
# wait until the wire is high... just in case
|
||||
while True:
|
||||
if self.data_pin.value():
|
||||
break
|
||||
retries -= 1
|
||||
if retries == 0:
|
||||
raise OSError("OneWire pin didn't go high")
|
||||
pyb.udelay(10)
|
||||
def writebyte(self, value):
|
||||
return _ow.writebyte(self.pin, value)
|
||||
|
||||
# pull the bus low for at least 480us
|
||||
self.data_pin.low()
|
||||
self.data_pin.init(self.data_pin.OUT_PP)
|
||||
pyb.udelay(480)
|
||||
|
||||
# If there is a slave present, it should pull the bus low within 60us
|
||||
i = pyb.disable_irq()
|
||||
self.data_pin.init(self.data_pin.IN, self.data_pin.PULL_UP)
|
||||
pyb.udelay(70)
|
||||
presence = not self.data_pin.value()
|
||||
pyb.enable_irq(i)
|
||||
pyb.udelay(410)
|
||||
return presence
|
||||
|
||||
def write_bit(self, value):
|
||||
"""
|
||||
Write a single bit.
|
||||
"""
|
||||
pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP = self.cache
|
||||
self._write_bit(value, pin_init, pin_value, Pin_OUT_PP)
|
||||
|
||||
def _write_bit(self, value, pin_init, pin_value, Pin_OUT_PP):
|
||||
"""
|
||||
Write a single bit - requires cached methods/attributes be passed as arguments.
|
||||
See also write_bit()
|
||||
"""
|
||||
d0, d1, d2, d3 = self.write_delays
|
||||
udelay = pyb.udelay
|
||||
if value:
|
||||
# write 1
|
||||
i = disable_irq()
|
||||
pin_value(0)
|
||||
pin_init(Pin_OUT_PP)
|
||||
udelay(d0)
|
||||
pin_value(1)
|
||||
enable_irq(i)
|
||||
udelay(d1)
|
||||
else:
|
||||
# write 0
|
||||
i = disable_irq()
|
||||
pin_value(0)
|
||||
pin_init(Pin_OUT_PP)
|
||||
udelay(d2)
|
||||
pin_value(1)
|
||||
enable_irq(i)
|
||||
udelay(d3)
|
||||
|
||||
def write_byte(self, value):
|
||||
"""
|
||||
Write a byte. The pin will go tri-state at the end of the write to avoid
|
||||
heating in a short or other mishap.
|
||||
"""
|
||||
pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP = self.cache
|
||||
for i in range(8):
|
||||
self._write_bit(value & 1, pin_init, pin_value, Pin_OUT_PP)
|
||||
value >>= 1
|
||||
pin_init(Pin_IN, Pin_PULL_UP)
|
||||
|
||||
def write_bytes(self, bytestring):
|
||||
"""
|
||||
Write a sequence of bytes.
|
||||
"""
|
||||
for byte in bytestring:
|
||||
self.write_byte(byte)
|
||||
|
||||
def _read_bit(self, pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP):
|
||||
"""
|
||||
Read a single bit - requires cached methods/attributes be passed as arguments.
|
||||
See also read_bit()
|
||||
"""
|
||||
d0, d1, d2 = self.read_delays
|
||||
udelay = pyb.udelay
|
||||
pin_init(Pin_IN, Pin_PULL_UP) # TODO why do we need this?
|
||||
i = disable_irq()
|
||||
pin_value(0)
|
||||
pin_init(Pin_OUT_PP)
|
||||
udelay(d0)
|
||||
pin_init(Pin_IN, Pin_PULL_UP)
|
||||
udelay(d1)
|
||||
value = pin_value()
|
||||
enable_irq(i)
|
||||
udelay(d2)
|
||||
return value
|
||||
|
||||
def read_bit(self):
|
||||
"""
|
||||
Read a single bit.
|
||||
"""
|
||||
pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP = self.cache
|
||||
return self._read_bit(pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP)
|
||||
|
||||
def read_byte(self):
|
||||
"""
|
||||
Read a single byte and return the value as an integer.
|
||||
See also read_bytes()
|
||||
"""
|
||||
pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP = self.cache
|
||||
value = 0
|
||||
for i in range(8):
|
||||
bit = self._read_bit(pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP)
|
||||
value |= bit << i
|
||||
return value
|
||||
|
||||
def read_bytes(self, count):
|
||||
"""
|
||||
Read a sequence of N bytes.
|
||||
The bytes are returned as a bytearray.
|
||||
"""
|
||||
s = bytearray(count)
|
||||
for i in range(count):
|
||||
s[i] = self.read_byte()
|
||||
return s
|
||||
def write(self, buf):
|
||||
for b in buf:
|
||||
_ow.writebyte(self.pin, b)
|
||||
|
||||
def select_rom(self, rom):
|
||||
"""
|
||||
Select a specific device to talk to. Pass in rom as a bytearray (8 bytes).
|
||||
"""
|
||||
assert len(rom) == 8, "ROM must be 8 bytes"
|
||||
self.reset()
|
||||
self.write_byte(0x55) # ROM MATCH
|
||||
self.write_bytes(rom)
|
||||
|
||||
def read_rom(self):
|
||||
"""
|
||||
Read the ROM - this works if there is only a single device attached.
|
||||
"""
|
||||
self.reset()
|
||||
self.write_byte(0x33) # READ ROM
|
||||
rom = self.read_bytes(8)
|
||||
# TODO: check CRC of the ROM
|
||||
return rom
|
||||
|
||||
def skip_rom(self):
|
||||
"""
|
||||
Send skip-rom command - this works if there is only one device attached.
|
||||
"""
|
||||
self.write_byte(0xCC) # SKIP ROM
|
||||
|
||||
def depower(self):
|
||||
self.data_pin.init(self.data_pin.IN, self.data_pin.PULL_NONE)
|
||||
self.writebyte(MATCH_ROM)
|
||||
self.write(rom)
|
||||
|
||||
def scan(self):
|
||||
"""
|
||||
Return a list of ROMs for all attached devices.
|
||||
Each ROM is returned as a bytes object of 8 bytes.
|
||||
"""
|
||||
devices = []
|
||||
self._reset_search()
|
||||
while True:
|
||||
rom = self._search()
|
||||
if not rom:
|
||||
return devices
|
||||
devices.append(rom)
|
||||
diff = 65
|
||||
rom = False
|
||||
for i in range(0xff):
|
||||
rom, diff = self._search_rom(rom, diff)
|
||||
if rom:
|
||||
devices += [rom]
|
||||
if diff == 0:
|
||||
break
|
||||
return devices
|
||||
|
||||
def _reset_search(self):
|
||||
self.last_discrepancy = 0
|
||||
self.last_device_flag = False
|
||||
self.last_family_discrepancy = 0
|
||||
self.rom = bytearray(8)
|
||||
|
||||
def _search(self):
|
||||
# initialize for search
|
||||
id_bit_number = 1
|
||||
last_zero = 0
|
||||
rom_byte_number = 0
|
||||
rom_byte_mask = 1
|
||||
search_result = 0
|
||||
pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP = self.cache
|
||||
|
||||
# if the last call was not the last one
|
||||
if not self.last_device_flag:
|
||||
# 1-Wire reset
|
||||
if not self.reset():
|
||||
self._reset_search()
|
||||
return None
|
||||
|
||||
# issue the search command
|
||||
self.write_byte(0xF0)
|
||||
|
||||
# loop to do the search
|
||||
while rom_byte_number < 8: # loop until through all ROM bytes 0-7
|
||||
# read a bit and its complement
|
||||
id_bit = self._read_bit(pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP)
|
||||
cmp_id_bit = self._read_bit(pin_init, pin_value, Pin_OUT_PP, Pin_IN, Pin_PULL_UP)
|
||||
|
||||
# check for no devices on 1-wire
|
||||
if (id_bit == 1) and (cmp_id_bit == 1):
|
||||
break
|
||||
def _search_rom(self, l_rom, diff):
|
||||
if not self.reset():
|
||||
return None, 0
|
||||
self.writebyte(SEARCH_ROM)
|
||||
if not l_rom:
|
||||
l_rom = bytearray(8)
|
||||
rom = bytearray(8)
|
||||
next_diff = 0
|
||||
i = 64
|
||||
for byte in range(8):
|
||||
r_b = 0
|
||||
for bit in range(8):
|
||||
b = self.readbit()
|
||||
if self.readbit():
|
||||
if b: # there are no devices or there is an error on the bus
|
||||
return None, 0
|
||||
else:
|
||||
# all devices coupled have 0 or 1
|
||||
if (id_bit != cmp_id_bit):
|
||||
search_direction = id_bit # bit write value for search
|
||||
else:
|
||||
# if this discrepancy if before the Last Discrepancy
|
||||
# on a previous next then pick the same as last time
|
||||
if (id_bit_number < self.last_discrepancy):
|
||||
search_direction = (self.rom[rom_byte_number] & rom_byte_mask) > 0
|
||||
else:
|
||||
# if equal to last pick 1, if not then pick 0
|
||||
search_direction = (id_bit_number == self.last_discrepancy)
|
||||
|
||||
# if 0 was picked then record its position in LastZero
|
||||
if search_direction == 0:
|
||||
last_zero = id_bit_number
|
||||
|
||||
# check for Last discrepancy in family
|
||||
if last_zero < 9:
|
||||
self.last_family_discrepancy = last_zero
|
||||
if not b: # collision, two devices with different bit meaning
|
||||
if diff > i or ((l_rom[byte] & (1 << bit)) and diff != i):
|
||||
b = 1
|
||||
next_diff = i
|
||||
self.writebit(b)
|
||||
if b:
|
||||
r_b |= 1 << bit
|
||||
i -= 1
|
||||
rom[byte] = r_b
|
||||
return rom, next_diff
|
||||
|
||||
# set or clear the bit in the ROM byte rom_byte_number
|
||||
# with mask rom_byte_mask
|
||||
if search_direction == 1:
|
||||
self.rom[rom_byte_number] |= rom_byte_mask
|
||||
else:
|
||||
self.rom[rom_byte_number] &= ~rom_byte_mask
|
||||
|
||||
# serial number search direction write bit
|
||||
#print('sd', search_direction)
|
||||
self.write_bit(search_direction)
|
||||
|
||||
# increment the byte counter id_bit_number
|
||||
# and shift the mask rom_byte_mask
|
||||
id_bit_number += 1
|
||||
rom_byte_mask <<= 1
|
||||
|
||||
# if the mask is 0 then go to new SerialNum byte rom_byte_number and reset mask
|
||||
if rom_byte_mask == 0x100:
|
||||
rom_byte_number += 1
|
||||
rom_byte_mask = 1
|
||||
|
||||
# if the search was successful then
|
||||
if not (id_bit_number < 65):
|
||||
# search successful so set last_discrepancy,last_device_flag,search_result
|
||||
self.last_discrepancy = last_zero
|
||||
|
||||
# check for last device
|
||||
if self.last_discrepancy == 0:
|
||||
self.last_device_flag = True
|
||||
search_result = True
|
||||
|
||||
# if no device found then reset counters so next 'search' will be like a first
|
||||
if not search_result or not self.rom[0]:
|
||||
self._reset_search()
|
||||
return None
|
||||
else:
|
||||
return bytes(self.rom)
|
||||
def crc8(self, data):
|
||||
return _ow.crc8(data)
|
||||
|
|
|
|||
|
|
@ -1,51 +0,0 @@
|
|||
# DS18x20 temperature sensor driver for MicroPython.
|
||||
# MIT license; Copyright (c) 2016 Damien P. George
|
||||
|
||||
from micropython import const
|
||||
|
||||
_CONVERT = const(0x44)
|
||||
_RD_SCRATCH = const(0xbe)
|
||||
_WR_SCRATCH = const(0x4e)
|
||||
|
||||
class DS18X20:
|
||||
def __init__(self, onewire):
|
||||
self.ow = onewire
|
||||
self.buf = bytearray(9)
|
||||
|
||||
def scan(self):
|
||||
return [rom for rom in self.ow.scan() if rom[0] == 0x10 or rom[0] == 0x28]
|
||||
|
||||
def convert_temp(self):
|
||||
self.ow.reset(True)
|
||||
self.ow.writebyte(self.ow.SKIP_ROM)
|
||||
self.ow.writebyte(_CONVERT)
|
||||
|
||||
def read_scratch(self, rom):
|
||||
self.ow.reset(True)
|
||||
self.ow.select_rom(rom)
|
||||
self.ow.writebyte(_RD_SCRATCH)
|
||||
self.ow.readinto(self.buf)
|
||||
if self.ow.crc8(self.buf):
|
||||
raise Exception('CRC error')
|
||||
return self.buf
|
||||
|
||||
def write_scratch(self, rom, buf):
|
||||
self.ow.reset(True)
|
||||
self.ow.select_rom(rom)
|
||||
self.ow.writebyte(_WR_SCRATCH)
|
||||
self.ow.write(buf)
|
||||
|
||||
def read_temp(self, rom):
|
||||
buf = self.read_scratch(rom)
|
||||
if rom[0] == 0x10:
|
||||
if buf[1]:
|
||||
t = buf[0] >> 1 | 0x80
|
||||
t = -((~t + 1) & 0xff)
|
||||
else:
|
||||
t = buf[0] >> 1
|
||||
return t - 0.25 + (buf[7] - buf[6]) / buf[7]
|
||||
else:
|
||||
t = buf[1] << 8 | buf[0]
|
||||
if t & 0x8000: # sign bit set
|
||||
t = -((t ^ 0xffff) + 1)
|
||||
return t / 16
|
||||
|
|
@ -1,91 +0,0 @@
|
|||
# 1-Wire driver for MicroPython on ESP8266
|
||||
# MIT license; Copyright (c) 2016 Damien P. George
|
||||
|
||||
from micropython import const
|
||||
import _onewire as _ow
|
||||
|
||||
class OneWireError(Exception):
|
||||
pass
|
||||
|
||||
class OneWire:
|
||||
SEARCH_ROM = const(0xf0)
|
||||
MATCH_ROM = const(0x55)
|
||||
SKIP_ROM = const(0xcc)
|
||||
|
||||
def __init__(self, pin):
|
||||
self.pin = pin
|
||||
self.pin.init(pin.OPEN_DRAIN)
|
||||
|
||||
def reset(self, required=False):
|
||||
reset = _ow.reset(self.pin)
|
||||
if required and not reset:
|
||||
raise OneWireError
|
||||
return reset
|
||||
|
||||
def readbit(self):
|
||||
return _ow.readbit(self.pin)
|
||||
|
||||
def readbyte(self):
|
||||
return _ow.readbyte(self.pin)
|
||||
|
||||
def readinto(self, buf):
|
||||
for i in range(len(buf)):
|
||||
buf[i] = _ow.readbyte(self.pin)
|
||||
|
||||
def writebit(self, value):
|
||||
return _ow.writebit(self.pin, value)
|
||||
|
||||
def writebyte(self, value):
|
||||
return _ow.writebyte(self.pin, value)
|
||||
|
||||
def write(self, buf):
|
||||
for b in buf:
|
||||
_ow.writebyte(self.pin, b)
|
||||
|
||||
def select_rom(self, rom):
|
||||
self.reset()
|
||||
self.writebyte(MATCH_ROM)
|
||||
self.write(rom)
|
||||
|
||||
def scan(self):
|
||||
devices = []
|
||||
diff = 65
|
||||
rom = False
|
||||
for i in range(0xff):
|
||||
rom, diff = self._search_rom(rom, diff)
|
||||
if rom:
|
||||
devices += [rom]
|
||||
if diff == 0:
|
||||
break
|
||||
return devices
|
||||
|
||||
def _search_rom(self, l_rom, diff):
|
||||
if not self.reset():
|
||||
return None, 0
|
||||
self.writebyte(SEARCH_ROM)
|
||||
if not l_rom:
|
||||
l_rom = bytearray(8)
|
||||
rom = bytearray(8)
|
||||
next_diff = 0
|
||||
i = 64
|
||||
for byte in range(8):
|
||||
r_b = 0
|
||||
for bit in range(8):
|
||||
b = self.readbit()
|
||||
if self.readbit():
|
||||
if b: # there are no devices or there is an error on the bus
|
||||
return None, 0
|
||||
else:
|
||||
if not b: # collision, two devices with different bit meaning
|
||||
if diff > i or ((l_rom[byte] & (1 << bit)) and diff != i):
|
||||
b = 1
|
||||
next_diff = i
|
||||
self.writebit(b)
|
||||
if b:
|
||||
r_b |= 1 << bit
|
||||
i -= 1
|
||||
rom[byte] = r_b
|
||||
return rom, next_diff
|
||||
|
||||
def crc8(self, data):
|
||||
return _ow.crc8(data)
|
||||
Ładowanie…
Reference in New Issue