mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR. 

To make it clearer that these addresses are both for firmware text and that
they have a prescribed ordering.
pull/3679/merge
Damien George 2018-03-27 21:20:04 +11:00
rodzic 7aec06ca9a
commit 95b2cb008e
5 zmienionych plików z 10 dodań i 10 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

12
ports/stm32/Makefile
Wyświetl plik

@ -387,24 +387,24 @@ else
$(Q)$(DFU_UTIL) -a 0 -d $(DEVICE) -D $<
endif
FLASH_ADDR ?= 0x08000000
TEXT_ADDR ?= 0x08020000
TEXT0_ADDR ?= 0x08000000
TEXT1_ADDR ?= 0x08020000
deploy-stlink: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware0.bin to the board via ST-LINK"
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin $(FLASH_ADDR)
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin $(TEXT0_ADDR)
$(ECHO) "Writing $(BUILD)/firmware1.bin to the board via ST-LINK"
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin $(TEXT_ADDR)
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin $(TEXT1_ADDR)
deploy-openocd: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware{0,1}.bin to the board via ST-LINK using OpenOCD"
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware0.bin $(FLASH_ADDR) $(BUILD)/firmware1.bin $(TEXT_ADDR)"
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware0.bin $(TEXT0_ADDR) $(BUILD)/firmware1.bin $(TEXT1_ADDR)"
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
$(ECHO) "GEN $@"
$(Q)$(OBJCOPY) -O binary -j .isr_vector $^ $(BUILD)/firmware0.bin
$(Q)$(OBJCOPY) -O binary -j .text -j .data $^ $(BUILD)/firmware1.bin
$(Q)$(PYTHON) $(DFU) -b $(FLASH_ADDR):$(BUILD)/firmware0.bin -b $(TEXT_ADDR):$(BUILD)/firmware1.bin $@
$(Q)$(PYTHON) $(DFU) -b $(TEXT0_ADDR):$(BUILD)/firmware0.bin -b $(TEXT1_ADDR):$(BUILD)/firmware1.bin $@
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(ECHO) "GEN $@"

2
ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk
Wyświetl plik

@ -4,5 +4,5 @@ CMSIS_MCU = STM32L475xx
# the only diffrence to the stm32l476 - so reuse some files.
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
TEXT_ADDR = 0x08004000
TEXT1_ADDR = 0x08004000
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg

2
ports/stm32/boards/LIMIFROG/mpconfigboard.mk
Wyświetl plik

@ -2,4 +2,4 @@ MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xe.ld boards/common_ifs.ld
TEXT_ADDR = 0x08004000
TEXT1_ADDR = 0x08004000

2
ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.mk
Wyświetl plik

@ -2,4 +2,4 @@ MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
TEXT_ADDR = 0x08004000
TEXT1_ADDR = 0x08004000

2
ports/stm32/boards/STM32L476DISC/mpconfigboard.mk
Wyświetl plik

@ -2,5 +2,5 @@ MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
TEXT_ADDR = 0x08004000
TEXT1_ADDR = 0x08004000
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg