nrf: Remove port member from Pin object

In order to be able to support GPIO1 port on nrf52840
the port has been removed from the Pin object.

All pins on port1 will now be incrementally on top of
the pin numbers for gpio0. Hence, Pin 1.00 will become
P32, and Pin 1.15 will become P47.

The modification is done to address the new gpio HAL
interface in nrfx, which resolves the port to be
configured base on a multiple of 32.

The patch also affects the existing devices which does
not have a second GPIO port in the way that the
port indication A and B is removed from Pin generation.
This means that the port which was earlier addressed
as PA0 is now P0, and PA31 is P31.

Also, this patch removes the gpio member which earlier
pointed to the perihperal GPIO base address. This is not
needed anymore, hence removed.

ports/nrf/boards/arduino_primo/mpconfigboard.h

@@ -60,21 +60,21 @@
 #define MICROPY_HW_LED1             (20) // LED1
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A11)
-#define MICROPY_HW_UART1_TX         (pin_A12)
+#define MICROPY_HW_UART1_RX         (pin_P11)
+#define MICROPY_HW_UART1_TX         (pin_P12)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A25) // (Arduino D13)
-#define MICROPY_HW_SPI0_MOSI        (pin_A23) // (Arduino D11)
-#define MICROPY_HW_SPI0_MISO        (pin_A24) // (Arduino D12)
+#define MICROPY_HW_SPI0_SCK         (pin_P25) // (Arduino D13)
+#define MICROPY_HW_SPI0_MOSI        (pin_P23) // (Arduino D11)
+#define MICROPY_HW_SPI0_MISO        (pin_P24) // (Arduino D12)
 
 #define MICROPY_HW_PWM0_NAME        "PWM0"
 #define MICROPY_HW_PWM1_NAME        "PWM1"
 #define MICROPY_HW_PWM2_NAME        "PWM2"
 
 // buzzer pin
-#define MICROPY_HW_MUSIC_PIN        (pin_A8)
+#define MICROPY_HW_MUSIC_PIN        (pin_P8)
 
 #define HELP_TEXT_BOARD_LED         "1"

ports/nrf/boards/arduino_primo/pins.csv

@@ -1,30 +1,30 @@
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA5,PA5
-PA6,PA6
-PA7,PA7
-PA8,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P2,P2
+P3,P3
+P4,P4
+P5,P5
+P6,P6
+P7,P7
+P8,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31

ports/nrf/boards/dvk_bl652/mpconfigboard.h

@@ -60,17 +60,17 @@
 #define MICROPY_HW_LED2             (19) // LED2
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A8)
-#define MICROPY_HW_UART1_TX         (pin_A6)
-#define MICROPY_HW_UART1_CTS        (pin_A7)
-#define MICROPY_HW_UART1_RTS        (pin_A5)
+#define MICROPY_HW_UART1_RX         (pin_P8)
+#define MICROPY_HW_UART1_TX         (pin_P6)
+#define MICROPY_HW_UART1_CTS        (pin_P7)
+#define MICROPY_HW_UART1_RTS        (pin_P5)
 #define MICROPY_HW_UART1_HWFC       (1)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A25)
-#define MICROPY_HW_SPI0_MOSI        (pin_A23)
-#define MICROPY_HW_SPI0_MISO        (pin_A24)
+#define MICROPY_HW_SPI0_SCK         (pin_P25)
+#define MICROPY_HW_SPI0_MOSI        (pin_P23)
+#define MICROPY_HW_SPI0_MISO        (pin_P24)
 
 #define MICROPY_HW_PWM0_NAME        "PWM0"
 #define MICROPY_HW_PWM1_NAME        "PWM1"

ports/nrf/boards/dvk_bl652/pins.csv

@@ -1,31 +1,31 @@
-PA2,PA2
-PA3,PA3
-PA4,PA4
-UART_RTS,PA5
-UART_TX,PA6
-UART_CTS,PA7
-UART_RX,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P2,P2
+P3,P3
+P4,P4
+UART_RTS,P5
+UART_TX,P6
+UART_CTS,P7
+UART_RX,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31
 

ports/nrf/boards/feather52/mpconfigboard.h

@@ -60,15 +60,15 @@
 #define MICROPY_HW_LED2             (19) // LED2
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A8)
-#define MICROPY_HW_UART1_TX         (pin_A6)
+#define MICROPY_HW_UART1_RX         (pin_P8)
+#define MICROPY_HW_UART1_TX         (pin_P6)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A12) // (Arduino D13)
-#define MICROPY_HW_SPI0_MOSI        (pin_A13) // (Arduino D11)
-#define MICROPY_HW_SPI0_MISO        (pin_A14) // (Arduino D12)
+#define MICROPY_HW_SPI0_SCK         (pin_P12) // (Arduino D13)
+#define MICROPY_HW_SPI0_MOSI        (pin_P13) // (Arduino D11)
+#define MICROPY_HW_SPI0_MISO        (pin_P14) // (Arduino D12)
 
 #define MICROPY_HW_PWM0_NAME        "PWM0"
 #define MICROPY_HW_PWM1_NAME        "PWM1"

ports/nrf/boards/feather52/pins.csv

@@ -1,25 +1,25 @@
-PA2,PA2,ADC0_IN0
-PA3,PA3,ADC0_IN1
-PA4,PA4,ADC0_IN2
-PA5,PA5,ADC0_IN3
-UART_TX,PA6
-PA7,PA7
-UART_RX,PA8
-NFC1,PA9
-NFC2,PA10
-PA11,PA11
-SPI_SCK,PA12
-SPI_MOSI,PA13
-SPI_MISO,PA14
-PA15,PA15
-PA16,PA16
-LED1,PA17
-LED2,PA19
-PA20,PA20
-I2C_SDA,PA25
-I2C_SCL,PA26
-PA27,PA27
-PA28,PA28,ADC0_IN4
-PA29,PA29,ADC0_IN5
-PA30,PA30,ADC0_IN6
-PA31,PA31,ADC0_IN7
+P2,P2,ADC0_IN0
+P3,P3,ADC0_IN1
+P4,P4,ADC0_IN2
+P5,P5,ADC0_IN3
+UART_TX,P6
+P7,P7
+UART_RX,P8
+NFC1,P9
+NFC2,P10
+P11,P11
+SPI_SCK,P12
+SPI_MOSI,P13
+SPI_MISO,P14
+P15,P15
+P16,P16
+LED1,P17
+LED2,P19
+P20,P20
+I2C_SDA,P25
+I2C_SCL,P26
+P27,P27
+P28,P28,ADC0_IN4
+P29,P29,ADC0_IN5
+P30,P30,ADC0_IN6
+P31,P31,ADC0_IN7

ports/nrf/boards/make-pins.py

@@ -11,19 +11,16 @@ SUPPORTED_FN = {
     'UART'  : ['RX', 'TX', 'CTS', 'RTS']
 }
 
-def parse_port_pin(name_str):
-    """Parses a string and returns a (port-num, pin-num) tuple."""
-    if len(name_str) < 3:
+def parse_pin(name_str):
+    """Parses a string and returns a pin-num."""
+    if len(name_str) < 1:
         raise ValueError("Expecting pin name to be at least 4 charcters.")
     if name_str[0] != 'P':
         raise ValueError("Expecting pin name to start with P")
-    if name_str[1] not in ('A', 'B'):
-        raise ValueError("Expecting pin port to be in A or B")
-    port = ord(name_str[1]) - ord('A')
-    pin_str = name_str[2:].split('/')[0]
+    pin_str = name_str[1:].split('/')[0]
     if not pin_str.isdigit():
         raise ValueError("Expecting numeric pin number.")
-    return (port, int(pin_str))
+    return int(pin_str)
 
 def split_name_num(name_num):
     num = None
@@ -89,8 +86,7 @@ class AlternateFunction(object):
 class Pin(object):
     """Holds the information associated with a pin."""
 
-    def __init__(self, port, pin):
-        self.port = port
+    def __init__(self, pin):
         self.pin = pin
         self.alt_fn = []
         self.alt_fn_count = 0
@@ -98,11 +94,8 @@ class Pin(object):
         self.adc_channel = 0
         self.board_pin = False
 
-    def port_letter(self):
-        return chr(self.port + ord('A'))
-
     def cpu_pin_name(self):
-        return '{:s}{:d}'.format(self.port_letter(), self.pin)
+        return '{:s}{:d}'.format("P", self.pin)
 
     def is_board_pin(self):
         return self.board_pin
@@ -157,8 +150,8 @@ class Pin(object):
             print("// ",  end='')
         print('};')
         print('')
-        print('const pin_obj_t pin_{:s} = PIN({:s}, {:d}, {:s}, {:s}, {:d});'.format(
-            self.cpu_pin_name(), self.port_letter(), self.pin,
+        print('const pin_obj_t pin_{:s} = PIN({:d}, {:s}, {:s}, {:d});'.format(
+            self.cpu_pin_name(), self.pin,
             self.alt_fn_name(null_if_0=True),
             self.adc_num_str(), self.adc_channel))
         print('')
@@ -197,10 +190,10 @@ class Pins(object):
         self.cpu_pins = []   # list of NamedPin objects
         self.board_pins = [] # list of NamedPin objects
 
-    def find_pin(self, port_num, pin_num):
+    def find_pin(self, pin_num):
         for named_pin in self.cpu_pins:
             pin = named_pin.pin()
-            if pin.port == port_num and pin.pin == pin_num:
+            if pin.pin == pin_num:
                 return pin
 
     def parse_af_file(self, filename, pinname_col, af_col, af_col_end):
@@ -208,10 +201,10 @@ class Pins(object):
             rows = csv.reader(csvfile)
             for row in rows:
                 try:
-                    (port_num, pin_num) = parse_port_pin(row[pinname_col])
+                    pin_num = parse_pin(row[pinname_col])
                 except:
                     continue
-                pin = Pin(port_num, pin_num)
+                pin = Pin(pin_num)
                 for af_idx in range(af_col, len(row)):
                     if af_idx < af_col_end:
                         pin.parse_af(af_idx - af_col, row[af_idx])
@@ -224,10 +217,10 @@ class Pins(object):
             rows = csv.reader(csvfile)
             for row in rows:
                 try:
-                    (port_num, pin_num) = parse_port_pin(row[1])
+                    pin_num = parse_pin(row[1])
                 except:
                     continue
-                pin = self.find_pin(port_num, pin_num)
+                pin = self.find_pin(pin_num)
                 if pin:
                     pin.set_is_board_pin()
                     self.board_pins.append(NamedPin(row[0], pin))

ports/nrf/boards/microbit/mpconfigboard.h

@@ -56,15 +56,15 @@
 #define MICROPY_HW_ENABLE_CAN       (0)
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A25)
-#define MICROPY_HW_UART1_TX         (pin_A24)
+#define MICROPY_HW_UART1_RX         (pin_P25)
+#define MICROPY_HW_UART1_TX         (pin_P24)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A23)
-#define MICROPY_HW_SPI0_MOSI        (pin_A21)
-#define MICROPY_HW_SPI0_MISO        (pin_A22)
+#define MICROPY_HW_SPI0_SCK         (pin_P23)
+#define MICROPY_HW_SPI0_MOSI        (pin_P21)
+#define MICROPY_HW_SPI0_MISO        (pin_P22)
 
 // micro:bit music pin
-#define MICROPY_HW_MUSIC_PIN        (pin_A3)
+#define MICROPY_HW_MUSIC_PIN        (pin_P3)

ports/nrf/boards/microbit/pins.csv

@@ -1,32 +1,32 @@
-I2C_SCL,PA0
-PA1,PA1
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA5,PA5
-PA6,PA6
-PA7,PA7
-UART_RTS,PA8
-UART_TX,PA9
-UART_CTS,PA10
-UART_RX,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-SPI_MOSI,PA21
-SPI_MISO,PA22
-SPI_SCK,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-I2C_SDA,PA30
-PA31,PA31
+I2C_SCL,P0
+P1,P1
+P2,P2
+P3,P3
+P4,P4
+P5,P5
+P6,P6
+P7,P7
+UART_RTS,P8
+UART_TX,P9
+UART_CTS,P10
+UART_RX,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+SPI_MOSI,P21
+SPI_MISO,P22
+SPI_SCK,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+I2C_SDA,P30
+P31,P31

ports/nrf/boards/nrf51_prefix.c

@@ -17,14 +17,12 @@
     .af_fn = (af_ptr) \
 }
 
-#define PIN(p_port, p_pin, p_af, p_adc_num, p_adc_channel) \
+#define PIN(p_pin, p_af, p_adc_num, p_adc_channel) \
 { \
     { &pin_type }, \
-    .name = MP_QSTR_ ## p_port ## p_pin, \
-    .port = PORT_ ## p_port, \
+    .name = MP_QSTR_P ## p_pin, \
     .pin = (p_pin), \
     .num_af = (sizeof(p_af) / sizeof(pin_af_obj_t)), \
-    .pin_mask = (1 << p_pin), \
     .af = p_af, \
     .adc_num = p_adc_num, \
     .adc_channel = p_adc_channel, \

ports/nrf/boards/nrf52_prefix.c

@@ -17,14 +17,12 @@
     .af_fn = (af_ptr) \
 }
 
-#define PIN(p_port, p_pin, p_af, p_adc_num, p_adc_channel) \
+#define PIN(p_pin, p_af, p_adc_num, p_adc_channel) \
 { \
     { &pin_type }, \
-    .name = MP_QSTR_ ## p_port ## p_pin, \
-    .port = PORT_ ## p_port, \
+    .name = MP_QSTR_P ## p_pin, \
     .pin = (p_pin), \
     .num_af = (sizeof(p_af) / sizeof(pin_af_obj_t)), \
-    .pin_mask = (1 << p_pin), \
     .af = p_af, \
     .adc_num = p_adc_num, \
     .adc_channel = p_adc_channel, \

ports/nrf/boards/pca10000/mpconfigboard.h

@@ -60,8 +60,8 @@
 #define MICROPY_HW_LED_BLUE         (23) // BLUE
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A11)
-#define MICROPY_HW_UART1_TX         (pin_A9)
+#define MICROPY_HW_UART1_RX         (pin_P11)
+#define MICROPY_HW_UART1_TX         (pin_P9)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 #define HELP_TEXT_BOARD_LED         "1,2,3"

ports/nrf/boards/pca10000/pins.csv

@@ -1,7 +1,7 @@
-UART_RTS,PA8
-UART_TX,PA9
-UART_CTS,PA10
-UART_RX,PA11
-LED_RED,PA21
-LED_GREEN,PA22
-LED_BLUE,PA23
+UART_RTS,P8
+UART_TX,P9
+UART_CTS,P10
+UART_RX,P11
+LED_RED,P21
+LED_GREEN,P22
+LED_BLUE,P23

ports/nrf/boards/pca10001/mpconfigboard.h

@@ -60,10 +60,10 @@
 #define MICROPY_HW_LED2             (19) // LED2
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A11)
-#define MICROPY_HW_UART1_TX         (pin_A9)
-#define MICROPY_HW_UART1_CTS        (pin_A10)
-#define MICROPY_HW_UART1_RTS        (pin_A8)
+#define MICROPY_HW_UART1_RX         (pin_P11)
+#define MICROPY_HW_UART1_TX         (pin_P9)
+#define MICROPY_HW_UART1_CTS        (pin_P10)
+#define MICROPY_HW_UART1_RTS        (pin_P8)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 #define HELP_TEXT_BOARD_LED         "1,2"

ports/nrf/boards/pca10001/pins.csv

@@ -1,32 +1,32 @@
-PA0,PA0
-PA1,PA1
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA5,PA5
-PA6,PA6
-PA7,PA7
-UART_RTS,PA8
-UART_TX,PA9
-UART_CTS,PA10
-UART_RX,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P0,P0
+P1,P1
+P2,P2
+P3,P3
+P4,P4
+P5,P5
+P6,P6
+P7,P7
+UART_RTS,P8
+UART_TX,P9
+UART_CTS,P10
+UART_RX,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31

ports/nrf/boards/pca10028/mpconfigboard.h

@@ -61,16 +61,16 @@
 #define MICROPY_HW_LED4             (24) // LED4
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A11)
-#define MICROPY_HW_UART1_TX         (pin_A9)
-#define MICROPY_HW_UART1_CTS        (pin_A10)
-#define MICROPY_HW_UART1_RTS        (pin_A8)
+#define MICROPY_HW_UART1_RX         (pin_P11)
+#define MICROPY_HW_UART1_TX         (pin_P9)
+#define MICROPY_HW_UART1_CTS        (pin_P10)
+#define MICROPY_HW_UART1_RTS        (pin_P8)
 #define MICROPY_HW_UART1_HWFC       (1)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A29)
-#define MICROPY_HW_SPI0_MOSI        (pin_A25)
-#define MICROPY_HW_SPI0_MISO        (pin_A28)
+#define MICROPY_HW_SPI0_SCK         (pin_P29)
+#define MICROPY_HW_SPI0_MOSI        (pin_P25)
+#define MICROPY_HW_SPI0_MISO        (pin_P28)
 
 #define HELP_TEXT_BOARD_LED         "1,2,3,4"

ports/nrf/boards/pca10028/pins.csv

@@ -1,32 +1,32 @@
-PA0,PA0
-PA1,PA1,ADC0_IN2
-PA2,PA2,ADC0_IN3
-PA3,PA3,ADC0_IN4
-PA4,PA4,ADC0_IN5
-PA5,PA5,ADC0_IN6
-PA6,PA6,ADC0_IN7
-PA7,PA7
-UART_RTS,PA8
-UART_TX,PA9
-UART_CTS,PA10
-UART_RX,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P0,P0
+P1,P1,ADC0_IN2
+P2,P2,ADC0_IN3
+P3,P3,ADC0_IN4
+P4,P4,ADC0_IN5
+P5,P5,ADC0_IN6
+P6,P6,ADC0_IN7
+P7,P7
+UART_RTS,P8
+UART_TX,P9
+UART_CTS,P10
+UART_RX,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31

ports/nrf/boards/pca10031/mpconfigboard.h

@@ -60,16 +60,16 @@
 #define MICROPY_HW_LED_BLUE         (23) // BLUE
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A11)
-#define MICROPY_HW_UART1_TX         (pin_A9)
-#define MICROPY_HW_UART1_CTS        (pin_A10)
-#define MICROPY_HW_UART1_RTS        (pin_A8)
+#define MICROPY_HW_UART1_RX         (pin_P11)
+#define MICROPY_HW_UART1_TX         (pin_P9)
+#define MICROPY_HW_UART1_CTS        (pin_P10)
+#define MICROPY_HW_UART1_RTS        (pin_P8)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A15)
-#define MICROPY_HW_SPI0_MOSI        (pin_A16)
-#define MICROPY_HW_SPI0_MISO        (pin_A17)
+#define MICROPY_HW_SPI0_SCK         (pin_P15)
+#define MICROPY_HW_SPI0_MOSI        (pin_P16)
+#define MICROPY_HW_SPI0_MISO        (pin_P17)
 
 #define HELP_TEXT_BOARD_LED         "1,2,3"

ports/nrf/boards/pca10031/pins.csv

@@ -1,13 +1,13 @@
-UART_RTS,PA8
-UART_TX,PA9
-UART_CTS,PA10
-UART_RX,PA11
-LED_RED,PA21
-LED_GREEN,PA22
-LED_BLUE,PA23
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
+UART_RTS,P8
+UART_TX,P9
+UART_CTS,P10
+UART_RX,P11
+LED_RED,P21
+LED_GREEN,P22
+LED_BLUE,P23
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20

ports/nrf/boards/pca10040/mpconfigboard.h

@@ -63,17 +63,17 @@
 #define MICROPY_HW_LED4             (20) // LED4
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A8)
-#define MICROPY_HW_UART1_TX         (pin_A6)
-#define MICROPY_HW_UART1_CTS        (pin_A7)
-#define MICROPY_HW_UART1_RTS        (pin_A5)
+#define MICROPY_HW_UART1_RX         (pin_P8)
+#define MICROPY_HW_UART1_TX         (pin_P6)
+#define MICROPY_HW_UART1_CTS        (pin_P7)
+#define MICROPY_HW_UART1_RTS        (pin_P5)
 #define MICROPY_HW_UART1_HWFC       (1)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A25) // (Arduino D13)
-#define MICROPY_HW_SPI0_MOSI        (pin_A23) // (Arduino D11)
-#define MICROPY_HW_SPI0_MISO        (pin_A24) // (Arduino D12)
+#define MICROPY_HW_SPI0_SCK         (pin_P25) // (Arduino D13)
+#define MICROPY_HW_SPI0_MOSI        (pin_P23) // (Arduino D11)
+#define MICROPY_HW_SPI0_MISO        (pin_P24) // (Arduino D12)
 
 #define MICROPY_HW_PWM0_NAME        "PWM0"
 #define MICROPY_HW_PWM1_NAME        "PWM1"

ports/nrf/boards/pca10040/pins.csv

@@ -1,30 +1,30 @@
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA5,PA5
-PA6,PA6
-PA7,PA7
-PA8,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P2,P2
+P3,P3
+P4,P4
+P5,P5
+P6,P6
+P7,P7
+P8,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31

ports/nrf/boards/pca10056/mpconfigboard.h

@@ -62,18 +62,18 @@
 #define MICROPY_HW_LED4             (16) // LED4
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A8)
-#define MICROPY_HW_UART1_TX         (pin_A6)
-#define MICROPY_HW_UART1_CTS        (pin_A7)
-#define MICROPY_HW_UART1_RTS        (pin_A5)
+#define MICROPY_HW_UART1_RX         (pin_P8)
+#define MICROPY_HW_UART1_TX         (pin_P6)
+#define MICROPY_HW_UART1_CTS        (pin_P7)
+#define MICROPY_HW_UART1_RTS        (pin_P5)
 #define MICROPY_HW_UART1_HWFC       (1)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
 
-#define MICROPY_HW_SPI0_SCK         (pin_B15)
-#define MICROPY_HW_SPI0_MOSI        (pin_B13)
-#define MICROPY_HW_SPI0_MISO        (pin_B14)
+#define MICROPY_HW_SPI0_SCK         (pin_P47)
+#define MICROPY_HW_SPI0_MOSI        (pin_P45)
+#define MICROPY_HW_SPI0_MISO        (pin_P46)
 
 #define MICROPY_HW_PWM0_NAME        "PWM0"
 #define MICROPY_HW_PWM1_NAME        "PWM1"

ports/nrf/boards/pca10056/pins.csv

@@ -1,48 +1,48 @@
-PA0,PA0
-PA1,PA1
-PA2,PA2,ADC0_IN0
-PA3,PA3,ADC0_IN1
-PA4,PA4,ADC0_IN2
-PA5,PA5,ADC0_IN3
-PA6,PA6
-PA7,PA7
-PA8,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28,ADC0_IN4
-PA29,PA29,ADC0_IN5
-PA30,PA30,ADC0_IN6
-PA31,PA31,ADC0_IN7
-PB0,PB0
-PB1,PB1
-PB2,PB2
-PB3,PB3
-PB4,PB4
-PB5,PB5
-PB6,PB6
-PB7,PB7
-PB8,PB8
-PB9,PB9
-PB10,PB10
-PB11,PB11
-PB12,PB12
-PB13,PB13
-PB14,PB14
-PB15,PB15
+P0,P0
+P1,P1
+P2,P2,ADC0_IN0
+P3,P3,ADC0_IN1
+P4,P4,ADC0_IN2
+P5,P5,ADC0_IN3
+P6,P6
+P7,P7
+P8,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28,ADC0_IN4
+P29,P29,ADC0_IN5
+P30,P30,ADC0_IN6
+P31,P31,ADC0_IN7
+P32,P32
+P33,P33
+P34,P34
+P35,P35
+P36,P36
+P37,P37
+P38,P38
+P39,P39
+P40,P40
+P41,P41
+P42,P42
+P43,P43
+P44,P44
+P45,P45
+P46,P46
+P47,P47

ports/nrf/boards/wt51822_s4at/mpconfigboard.h

@@ -55,12 +55,12 @@
 #define MICROPY_HW_ENABLE_CAN       (0)
 
 // UART config
-#define MICROPY_HW_UART1_RX         (pin_A1)
-#define MICROPY_HW_UART1_TX         (pin_A2)
+#define MICROPY_HW_UART1_RX         (pin_P1)
+#define MICROPY_HW_UART1_TX         (pin_P2)
 #define MICROPY_HW_UART1_HWFC       (0)
 
 // SPI0 config
 #define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_A9)
-#define MICROPY_HW_SPI0_MOSI        (pin_A10)
-#define MICROPY_HW_SPI0_MISO        (pin_A13)
+#define MICROPY_HW_SPI0_SCK         (pin_P9)
+#define MICROPY_HW_SPI0_MOSI        (pin_P10)
+#define MICROPY_HW_SPI0_MISO        (pin_P13)

ports/nrf/boards/wt51822_s4at/pins.csv

@@ -1,7 +1,7 @@
-PA1,PA1
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA9,PA9
-PA10,PA10
-PA13,PA13
+P1,P1
+P2,P2
+P3,P3
+P4,P4
+P9,P9
+P10,P10
+P13,P13

ports/nrf/examples/mountsd.py

@@ -25,7 +25,7 @@ from machine import SPI, Pin
 from sdcard import SDCard
 
 def mnt():
-    cs = Pin("A22", mode=Pin.OUT)
+    cs = Pin("P22", mode=Pin.OUT)
     sd = SDCard(SPI(0), cs)
     os.mount(sd, '/')
 

ports/nrf/examples/musictest.py

@@ -1,8 +1,8 @@
 # 
-# Example usage where "A3" is the Buzzer pin.
+# Example usage where "P3" is the Buzzer pin.
 #
 #  from musictest import play
-#  play("A3")
+#  play("P3")
 #
 
 from machine import Pin

ports/nrf/examples/nrf52_pwm.py

@@ -3,13 +3,13 @@ from machine import PWM, Pin
 
 def pulse():
     for i in range(0, 101):
-        p = PWM(0, Pin("A17", mode=Pin.OUT), freq=PWM.FREQ_16MHZ, duty=i, period=16000)
+        p = PWM(0, Pin("P17", mode=Pin.OUT), freq=PWM.FREQ_16MHZ, duty=i, period=16000)
         p.init()
         time.sleep_ms(10)
         p.deinit()
 
     for i in range(0, 101):
-        p = PWM(0, Pin("A17", mode=Pin.OUT), freq=PWM.FREQ_16MHZ, duty=100-i, period=16000)
+        p = PWM(0, Pin("P17", mode=Pin.OUT), freq=PWM.FREQ_16MHZ, duty=100-i, period=16000)
         p.init()
         time.sleep_ms(10)
         p.deinit()

ports/nrf/examples/nrf52_servo.py

@@ -30,7 +30,7 @@ class Servo():
         if pin_name:
             self.pin = Pin(pin_name, mode=Pin.OUT, pull=Pin.PULL_DOWN)
         else:
-            self.pin = Pin("A22", mode=Pin.OUT, pull=Pin.PULL_DOWN)
+            self.pin = Pin("P22", mode=Pin.OUT, pull=Pin.PULL_DOWN)
     def left(self):
         p = PWM(0, self.pin, freq=PWM.FREQ_125KHZ, pulse_width=105, period=2500, mode=PWM.MODE_HIGH_LOW)
         p.init()

ports/nrf/examples/powerup.py

@@ -28,8 +28,8 @@
 # Examples is written for nrf52832, pca10040 using s132 bluetooth stack.
 #
 # Joystick shield pin mapping:
-#  - analog stick x-direction - ADC0 - P0.02/"A02"
-#  - buttons P0.13 - P0.16 / "A13", "A14", "A15", "A16"
+#  - analog stick x-direction - ADC0 - P0.02/"P2"
+#  - buttons P0.13 - P0.16 / "P13", "P14", "P15", "P16"
 #
 # Example usage:
 #
@@ -70,10 +70,10 @@ class PowerUp3:
     def __init__(self):
         self.x_adc = ADC(1)
 
-        self.btn_speed_up = Pin("A13", mode=Pin.IN, pull=Pin.PULL_UP)
-        self.btn_speed_down = Pin("A15", mode=Pin.IN, pull=Pin.PULL_UP)
-        self.btn_speed_full = Pin("A14", mode=Pin.IN, pull=Pin.PULL_UP)
-        self.btn_speed_off = Pin("A16", mode=Pin.IN, pull=Pin.PULL_UP)
+        self.btn_speed_up = Pin("P13", mode=Pin.IN, pull=Pin.PULL_UP)
+        self.btn_speed_down = Pin("P15", mode=Pin.IN, pull=Pin.PULL_UP)
+        self.btn_speed_full = Pin("P14", mode=Pin.IN, pull=Pin.PULL_UP)
+        self.btn_speed_off = Pin("P16", mode=Pin.IN, pull=Pin.PULL_UP)
 
         self.x_mid = 0
         

ports/nrf/examples/seeed_tft.py

@@ -52,7 +52,7 @@ from machine import SPI, Pin
 from sdcard import SDCard
 
 def mount_tf(self, mount_point="/"):
-    sd = SDCard(SPI(0), Pin("A15", mode=Pin.OUT))
+    sd = SDCard(SPI(0), Pin("P15", mode=Pin.OUT))
     os.mount(sd, mount_point)
 
 class ILI9341:
@@ -65,9 +65,9 @@ class ILI9341:
 
         self.spi = SPI(0)
         # chip select
-        self.cs = Pin("A16", mode=Pin.OUT, pull=Pin.PULL_UP)
+        self.cs = Pin("P16", mode=Pin.OUT, pull=Pin.PULL_UP)
         # command
-        self.dc = Pin("A17", mode=Pin.OUT, pull=Pin.PULL_UP)
+        self.dc = Pin("P17", mode=Pin.OUT, pull=Pin.PULL_UP)
         
         # initialize all pins high
         self.cs.high()

ports/nrf/modules/machine/pin.c

@@ -197,9 +197,8 @@ STATIC void pin_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t
 
     // pin name
     mp_printf(print, "Pin(Pin.cpu.%q, mode=Pin.", self->name);
-    mp_printf(print, "port=0x%x, ", self->port);
+    mp_printf(print, "port=0x%x, ", self->pin / 32);
     mp_printf(print, "pin=0x%x, ", self->pin);
-    mp_printf(print, "pin_mask=0x%x,", self->pin_mask);
 /*
     uint32_t mode = pin_get_mode(self);
 
@@ -468,7 +467,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(pin_names_obj, pin_names);
 /// Get the pin port.
 STATIC mp_obj_t pin_port(mp_obj_t self_in) {
     pin_obj_t *self = self_in;
-    return MP_OBJ_NEW_SMALL_INT(self->port);
+    return MP_OBJ_NEW_SMALL_INT(self->pin / 32);
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(pin_port_obj, pin_port);
 
@@ -480,14 +479,6 @@ STATIC mp_obj_t pin_pin(mp_obj_t self_in) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(pin_pin_obj, pin_pin);
 
-/// \method gpio()
-/// Returns the base address of the GPIO block associated with this pin.
-STATIC mp_obj_t pin_gpio(mp_obj_t self_in) {
-    pin_obj_t *self = self_in;
-    return MP_OBJ_NEW_SMALL_INT((mp_int_t)self->gpio);
-}
-STATIC MP_DEFINE_CONST_FUN_OBJ_1(pin_gpio_obj, pin_gpio);
-
 /// \method mode()
 /// Returns the currently configured mode of the pin. The integer returned
 /// will match one of the allowed constants for the mode argument to the init
@@ -547,7 +538,6 @@ STATIC const mp_rom_map_elem_t pin_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_af_list), MP_ROM_PTR(&pin_af_list_obj) },
     { MP_ROM_QSTR(MP_QSTR_port),    MP_ROM_PTR(&pin_port_obj) },
     { MP_ROM_QSTR(MP_QSTR_pin),     MP_ROM_PTR(&pin_pin_obj) },
-    { MP_ROM_QSTR(MP_QSTR_gpio),    MP_ROM_PTR(&pin_gpio_obj) },
     { MP_ROM_QSTR(MP_QSTR_mode),    MP_ROM_PTR(&pin_mode_obj) },
     { MP_ROM_QSTR(MP_QSTR_pull),    MP_ROM_PTR(&pin_pull_obj) },
     { MP_ROM_QSTR(MP_QSTR_af),      MP_ROM_PTR(&pin_af_obj) },

ports/nrf/modules/machine/pin.h

@@ -51,13 +51,10 @@ typedef struct {
 typedef struct {
   mp_obj_base_t base;
   qstr name;
-  uint32_t port   : 4;
-  uint32_t pin    : 5;      // Some ARM processors use 32 bits/PORT
+  uint32_t pin : 8;
   uint32_t num_af : 4;
   uint32_t adc_channel : 5; // Some ARM processors use 32 bits/PORT
   uint32_t adc_num  : 3;    // 1 bit per ADC
-  uint32_t pin_mask;
-  pin_gpio_t *gpio;
   const pin_af_obj_t *af;
   uint32_t pull;
 } pin_obj_t;

ports/nrf/nrf51_af.csv

@@ -1,32 +1,32 @@
-PA0,PA0
-PA1,PA1,ADC0_IN2
-PA2,PA2,ADC0_IN3
-PA3,PA3,ADC0_IN4
-PA4,PA4,ADC0_IN5
-PA5,PA5,ADC0_IN6
-PA6,PA6,ADC0_IN7
-PA7,PA7
-PA8,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
+P0,P0
+P1,P1,ADC0_IN2
+P2,P2,ADC0_IN3
+P3,P3,ADC0_IN4
+P4,P4,ADC0_IN5
+P5,P5,ADC0_IN6
+P6,P6,ADC0_IN7
+P7,P7
+P8,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31

ports/nrf/nrf52_af.csv

@@ -1,48 +1,48 @@
-PA0,PA0
-PA1,PA1
-PA2,PA2
-PA3,PA3
-PA4,PA4
-PA5,PA5
-PA6,PA6
-PA7,PA7
-PA8,PA8
-PA9,PA9
-PA10,PA10
-PA11,PA11
-PA12,PA12
-PA13,PA13
-PA14,PA14
-PA15,PA15
-PA16,PA16
-PA17,PA17
-PA18,PA18
-PA19,PA19
-PA20,PA20
-PA21,PA21
-PA22,PA22
-PA23,PA23
-PA24,PA24
-PA25,PA25
-PA26,PA26
-PA27,PA27
-PA28,PA28
-PA29,PA29
-PA30,PA30
-PA31,PA31
-PB0,PB0
-PB1,PB1
-PB2,PB2
-PB3,PB3
-PB4,PB4
-PB5,PB5
-PB6,PB6
-PB7,PB7
-PB8,PB8
-PB9,PB9
-PB10,PB10
-PB11,PB11
-PB12,PB12
-PB13,PB13
-PB14,PB14
-PB15,PB15
+P0,P0
+P1,P1
+P2,P2
+P3,P3
+P4,P4
+P5,P5
+P6,P6
+P7,P7
+P8,P8
+P9,P9
+P10,P10
+P11,P11
+P12,P12
+P13,P13
+P14,P14
+P15,P15
+P16,P16
+P17,P17
+P18,P18
+P19,P19
+P20,P20
+P21,P21
+P22,P22
+P23,P23
+P24,P24
+P25,P25
+P26,P26
+P27,P27
+P28,P28
+P29,P29
+P30,P30
+P31,P31
+P32,P32
+P33,P33
+P34,P34
+P35,P35
+P36,P36
+P37,P37
+P38,P38
+P39,P39
+P40,P40
+P41,P41
+P42,P42
+P43,P43
+P44,P44
+P45,P45
+P46,P46
+P47,P47