mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

stm32/flashbdev: Support generic flash storage config via link symbols. 

A board can now define the following linker symbols to configure its flash
storage layout:

    _micropy_hw_internal_flash_storage_start
    _micropy_hw_internal_flash_storage_end
    _micropy_hw_internal_flash_storage_ram_cache_start
    _micropy_hw_internal_flash_storage_ram_cache_end

And optionally have a second flash segment by configuring
MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE_SEGMENT2 to 1 and defining:

    _micropy_hw_internal_flash_storage2_start
    _micropy_hw_internal_flash_storage2_end

Signed-off-by: Damien George <damien@micropython.org>
pull/8043/head
Damien George 2021-11-29 13:01:51 +11:00
rodzic 97a7cc243b
commit 84969194a1
2 zmienionych plików z 33 dodań i 2 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

30
ports/stm32/flashbdev.c
Wyświetl plik

@ -133,11 +133,35 @@ extern uint8_t _ram_fs_cache_end[];
#define FLASH_MEM_SEG1_NUM_BLOCKS ((&_flash_fs_end - &_flash_fs_start) / 512)
#else
#error "no internal flash storage support for this MCU"
// Generic configuration where the linker script specifies flash storage and RAM cache locations.
extern uint8_t _micropy_hw_internal_flash_storage_start;
extern uint8_t _micropy_hw_internal_flash_storage_end;
extern uint8_t _micropy_hw_internal_flash_storage2_start;
extern uint8_t _micropy_hw_internal_flash_storage2_end;
extern uint8_t _micropy_hw_internal_flash_storage_ram_cache_start[];
extern uint8_t _micropy_hw_internal_flash_storage_ram_cache_end[];
#define CACHE_MEM_START_ADDR \
((uintptr_t)&_micropy_hw_internal_flash_storage_ram_cache_start[0])
#define FLASH_SECTOR_SIZE_MAX \
(&_micropy_hw_internal_flash_storage_ram_cache_end[0] - &_micropy_hw_internal_flash_storage_ram_cache_start[0])
#define FLASH_MEM_SEG1_START_ADDR \
((long)&_micropy_hw_internal_flash_storage_start)
#define FLASH_MEM_SEG1_NUM_BLOCKS \
((&_micropy_hw_internal_flash_storage_end - &_micropy_hw_internal_flash_storage_start) / 512)
#if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE_SEGMENT2
#define FLASH_MEM_SEG2_START_ADDR \
((long)&_micropy_hw_internal_flash_storage2_start)
#define FLASH_MEM_SEG2_NUM_BLOCKS \
((&_micropy_hw_internal_flash_storage2_end - &_micropy_hw_internal_flash_storage2_start) / 512)
#endif
#endif
#if !defined(FLASH_MEM_SEG2_START_ADDR)
#define FLASH_MEM_SEG2_START_ADDR (0) // no second segment
#define FLASH_MEM_SEG2_NUM_BLOCKS (0) // no second segment
#endif
@ -220,9 +244,11 @@ static uint32_t convert_block_to_flash_addr(uint32_t block) {
if (block < FLASH_MEM_SEG1_NUM_BLOCKS) {
return FLASH_MEM_SEG1_START_ADDR + block * FLASH_BLOCK_SIZE;
}
#ifdef FLASH_MEM_SEG2_START_ADDR
if (block < FLASH_MEM_SEG1_NUM_BLOCKS + FLASH_MEM_SEG2_NUM_BLOCKS) {
return FLASH_MEM_SEG2_START_ADDR + (block - FLASH_MEM_SEG1_NUM_BLOCKS) * FLASH_BLOCK_SIZE;
}
#endif
// can add more flash segments here if needed, following above pattern
// bad block

5
ports/stm32/mpconfigboard_common.h
Wyświetl plik

@ -57,6 +57,11 @@
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
#endif
// If internal flash storage is enabled, whether to use a second segment of flash.
#ifndef MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE_SEGMENT2 (0)
#endif
// Whether to enable the RTC, exposed as pyb.RTC
#ifndef MICROPY_HW_ENABLE_RTC
#define MICROPY_HW_ENABLE_RTC (0)