mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

drivers/wiznet5k: Remove old Wiznet driver. 

It has been replaced by the submodule lib/wiznet5k.
pull/9058/head
robert-hh 2022-08-10 11:07:35 +02:00 zatwierdzone przez Damien George
rodzic f6ec01d1da
commit 71dcb21e24
13 zmienionych plików z 0 dodań i 8820 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

6
drivers/wiznet5k/README.md
Wyświetl plik

@ -1,6 +0,0 @@
This is the driver for the WIZnet5x00 series of Ethernet controllers.
Adapted for MicroPython.
Original source: https://github.com/Wiznet/W5500_EVB/tree/master/ioLibrary
Taken on: 30 August 2014

725
drivers/wiznet5k/ethernet/socket.c
Wyświetl plik

@ -1,725 +0,0 @@
//*****************************************************************************
//
//! \file socket.c
//! \brief SOCKET APIs Implements file.
//! \details SOCKET APIs like as Berkeley Socket APIs.
//! \version 1.0.3
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.3. Refer to M20140501
//! 1. Implicit type casting -> Explicit type casting.
//! 2. replace 0x01 with PACK_REMAINED in recvfrom()
//! 3. Validation a destination ip in connect() & sendto():
//! It occurs a fatal error on converting unint32 address if uint8* addr parameter is not aligned by 4byte address.
//! Copy 4 byte addr value into temporary uint32 variable and then compares it.
//! <2013/12/20> V1.0.2 Refer to M20131220
//! Remove Warning.
//! <2013/11/04> V1.0.1 2nd Release. Refer to "20131104".
//! In sendto(), Add to clear timeout interrupt status (Sn_IR_TIMEOUT)
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#include <string.h>
#include "py/mpthread.h"
#include "socket.h"
#define SOCK_ANY_PORT_NUM 0xC000;
static uint16_t sock_any_port = SOCK_ANY_PORT_NUM;
static uint16_t sock_io_mode = 0;
static uint16_t sock_is_sending = 0;
static uint16_t sock_remained_size[_WIZCHIP_SOCK_NUM_] = {0,0,};
static uint8_t sock_pack_info[_WIZCHIP_SOCK_NUM_] = {0,};
#if _WIZCHIP_ == 5200
static uint16_t sock_next_rd[_WIZCHIP_SOCK_NUM_] ={0,};
#endif
#define CHECK_SOCKNUM() \
do{ \
if(sn > _WIZCHIP_SOCK_NUM_) return SOCKERR_SOCKNUM; \
}while(0); \
#define CHECK_SOCKMODE(mode) \
do{ \
if((getSn_MR(sn) & 0x0F) != mode) return SOCKERR_SOCKMODE; \
}while(0); \
#define CHECK_SOCKINIT() \
do{ \
if((getSn_SR(sn) != SOCK_INIT)) return SOCKERR_SOCKINIT; \
}while(0); \
#define CHECK_SOCKDATA() \
do{ \
if(len == 0) return SOCKERR_DATALEN; \
}while(0); \
void WIZCHIP_EXPORT(socket_reset)(void) {
sock_any_port = SOCK_ANY_PORT_NUM;
sock_io_mode = 0;
sock_is_sending = 0;
/*
memset(sock_remained_size, 0, _WIZCHIP_SOCK_NUM_ * sizeof(uint16_t));
memset(sock_pack_info, 0, _WIZCHIP_SOCK_NUM_ * sizeof(uint8_t));
*/
#if _WIZCHIP_ == 5200
memset(sock_next_rd, 0, _WIZCHIP_SOCK_NUM_ * sizeof(uint16_t));
#endif
}
int8_t WIZCHIP_EXPORT(socket)(uint8_t sn, uint8_t protocol, uint16_t port, uint8_t flag)
{
CHECK_SOCKNUM();
switch(protocol)
{
case Sn_MR_TCP :
case Sn_MR_UDP :
case Sn_MR_MACRAW :
break;
#if ( _WIZCHIP_ < 5200 )
case Sn_MR_IPRAW :
case Sn_MR_PPPoE :
break;
#endif
default :
return SOCKERR_SOCKMODE;
}
if((flag & 0x06) != 0) return SOCKERR_SOCKFLAG;
#if _WIZCHIP_ == 5200
if(flag & 0x10) return SOCKERR_SOCKFLAG;
#endif
if(flag != 0)
{
switch(protocol)
{
case Sn_MR_TCP:
if((flag & (SF_TCP_NODELAY|SF_IO_NONBLOCK))==0) return SOCKERR_SOCKFLAG;
break;
case Sn_MR_UDP:
if(flag & SF_IGMP_VER2)
{
if((flag & SF_MULTI_ENABLE)==0) return SOCKERR_SOCKFLAG;
}
#if _WIZCHIP_ == 5500
if(flag & SF_UNI_BLOCK)
{
if((flag & SF_MULTI_ENABLE) == 0) return SOCKERR_SOCKFLAG;
}
#endif
break;
default:
break;
}
}
WIZCHIP_EXPORT(close)(sn);
setSn_MR(sn, (protocol | (flag & 0xF0)));
if(!port)
{
port = sock_any_port++;
if(sock_any_port == 0xFFF0) sock_any_port = SOCK_ANY_PORT_NUM;
}
setSn_PORT(sn,port);
setSn_CR(sn,Sn_CR_OPEN);
while(getSn_CR(sn));
sock_io_mode |= ((flag & SF_IO_NONBLOCK) << sn);
sock_is_sending &= ~(1<<sn);
sock_remained_size[sn] = 0;
sock_pack_info[sn] = 0;
while(getSn_SR(sn) == SOCK_CLOSED);
return (int8_t)sn;
}
int8_t WIZCHIP_EXPORT(close)(uint8_t sn)
{
CHECK_SOCKNUM();
setSn_CR(sn,Sn_CR_CLOSE);
/* wait to process the command... */
while( getSn_CR(sn) );
/* clear all interrupt of the socket. */
setSn_IR(sn, 0xFF);
sock_is_sending &= ~(1<<sn);
sock_remained_size[sn] = 0;
sock_pack_info[sn] = 0;
while(getSn_SR(sn) != SOCK_CLOSED);
return SOCK_OK;
}
int8_t WIZCHIP_EXPORT(listen)(uint8_t sn)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKINIT();
setSn_CR(sn,Sn_CR_LISTEN);
while(getSn_CR(sn));
while(getSn_SR(sn) != SOCK_LISTEN)
{
if(getSn_CR(sn) == SOCK_CLOSED)
{
WIZCHIP_EXPORT(close)(sn);
return SOCKERR_SOCKCLOSED;
}
}
return SOCK_OK;
}
int8_t WIZCHIP_EXPORT(connect)(uint8_t sn, uint8_t * addr, uint16_t port)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKINIT();
//M20140501 : For avoiding fatal error on memory align mismatched
//if( *((uint32_t*)addr) == 0xFFFFFFFF || *((uint32_t*)addr) == 0) return SOCKERR_IPINVALID;
{
uint32_t taddr;
taddr = ((uint32_t)addr[0] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[1] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[2] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[3] & 0x000000FF);
if (taddr == 0xFFFFFFFF || taddr == 0) return SOCKERR_IPINVALID;
}
//
if(port == 0) return SOCKERR_PORTZERO;
setSn_DIPR(sn,addr);
setSn_DPORT(sn,port);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR(wizchip_getsubn());
#endif
setSn_CR(sn,Sn_CR_CONNECT);
while(getSn_CR(sn));
if(sock_io_mode & (1<<sn)) return SOCK_BUSY;
while(getSn_SR(sn) != SOCK_ESTABLISHED)
{
if (getSn_SR(sn) == SOCK_CLOSED) {
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR((uint8_t*)"\x00\x00\x00\x00");
#endif
return SOCKERR_SOCKCLOSED;
}
if (getSn_IR(sn) & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR((uint8_t*)"\x00\x00\x00\x00");
#endif
return SOCKERR_TIMEOUT;
}
MICROPY_THREAD_YIELD();
}
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR((uint8_t*)"\x00\x00\x00\x00");
#endif
return SOCK_OK;
}
int8_t WIZCHIP_EXPORT(disconnect)(uint8_t sn)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
setSn_CR(sn,Sn_CR_DISCON);
/* wait to process the command... */
while(getSn_CR(sn));
sock_is_sending &= ~(1<<sn);
if(sock_io_mode & (1<<sn)) return SOCK_BUSY;
while(getSn_SR(sn) != SOCK_CLOSED)
{
if(getSn_IR(sn) & Sn_IR_TIMEOUT)
{
WIZCHIP_EXPORT(close)(sn);
return SOCKERR_TIMEOUT;
}
}
return SOCK_OK;
}
int32_t WIZCHIP_EXPORT(send)(uint8_t sn, uint8_t * buf, uint16_t len)
{
uint8_t tmp=0;
uint16_t freesize=0;
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKDATA();
tmp = getSn_SR(sn);
if(tmp != SOCK_ESTABLISHED && tmp != SOCK_CLOSE_WAIT) return SOCKERR_SOCKSTATUS;
if( sock_is_sending & (1<<sn) )
{
tmp = getSn_IR(sn);
if(tmp & Sn_IR_SENDOK)
{
setSn_IR(sn, Sn_IR_SENDOK);
#if _WZICHIP_ == 5200
if(getSn_TX_RD(sn) != sock_next_rd[sn])
{
setSn_CR(sn,Sn_CR_SEND);
while(getSn_CR(sn));
return SOCKERR_BUSY;
}
#endif
sock_is_sending &= ~(1<<sn);
}
else if(tmp & Sn_IR_TIMEOUT)
{
WIZCHIP_EXPORT(close)(sn);
return SOCKERR_TIMEOUT;
}
else return SOCK_BUSY;
}
freesize = getSn_TxMAX(sn);
if (len > freesize) len = freesize; // check size not to exceed MAX size.
while(1)
{
freesize = getSn_TX_FSR(sn);
tmp = getSn_SR(sn);
if ((tmp != SOCK_ESTABLISHED) && (tmp != SOCK_CLOSE_WAIT))
{
WIZCHIP_EXPORT(close)(sn);
return SOCKERR_SOCKSTATUS;
}
if( (sock_io_mode & (1<<sn)) && (len > freesize) ) return SOCK_BUSY;
if(len <= freesize) break;
MICROPY_THREAD_YIELD();
}
wiz_send_data(sn, buf, len);
#if _WIZCHIP_ == 5200
sock_next_rd[sn] = getSn_TX_RD(sn) + len;
#endif
setSn_CR(sn,Sn_CR_SEND);
/* wait to process the command... */
while(getSn_CR(sn));
sock_is_sending |= (1 << sn);
return len;
}
int32_t WIZCHIP_EXPORT(recv)(uint8_t sn, uint8_t * buf, uint16_t len)
{
uint8_t tmp = 0;
uint16_t recvsize = 0;
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKDATA();
recvsize = getSn_RxMAX(sn);
if(recvsize < len) len = recvsize;
while(1)
{
recvsize = getSn_RX_RSR(sn);
tmp = getSn_SR(sn);
if (tmp != SOCK_ESTABLISHED)
{
if(tmp == SOCK_CLOSE_WAIT)
{
if(recvsize != 0) break;
else if(getSn_TX_FSR(sn) == getSn_TxMAX(sn))
{
// dpgeorge: Getting here seems to be an orderly shutdown of the
// socket, and trying to get POSIX behaviour we return 0 because:
// "If no messages are available to be received and the peer has per‐
// formed an orderly shutdown, recv() shall return 0".
// TODO this return value clashes with SOCK_BUSY in non-blocking mode.
WIZCHIP_EXPORT(close)(sn);
return 0;
}
}
else
{
WIZCHIP_EXPORT(close)(sn);
return SOCKERR_SOCKSTATUS;
}
}
if((sock_io_mode & (1<<sn)) && (recvsize == 0)) return SOCK_BUSY;
if(recvsize != 0) break;
MICROPY_THREAD_YIELD();
};
if(recvsize < len) len = recvsize;
wiz_recv_data(sn, buf, len);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
return len;
}
int32_t WIZCHIP_EXPORT(sendto)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port)
{
uint8_t tmp = 0;
uint16_t freesize = 0;
CHECK_SOCKNUM();
switch(getSn_MR(sn) & 0x0F)
{
case Sn_MR_UDP:
case Sn_MR_MACRAW:
break;
default:
return SOCKERR_SOCKMODE;
}
CHECK_SOCKDATA();
//M20140501 : For avoiding fatal error on memory align mismatched
//if(*((uint32_t*)addr) == 0) return SOCKERR_IPINVALID;
{
uint32_t taddr;
taddr = ((uint32_t)addr[0]) & 0x000000FF;
taddr = (taddr << 8) + ((uint32_t)addr[1] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[2] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[3] & 0x000000FF);
if (taddr == 0xFFFFFFFF || taddr == 0) return SOCKERR_IPINVALID;
}
//
if(port == 0) return SOCKERR_PORTZERO;
tmp = getSn_SR(sn);
if(tmp != SOCK_MACRAW && tmp != SOCK_UDP) return SOCKERR_SOCKSTATUS;
setSn_DIPR(sn,addr);
setSn_DPORT(sn,port);
freesize = getSn_TxMAX(sn);
if (len > freesize) len = freesize; // check size not to exceed MAX size.
while(1)
{
freesize = getSn_TX_FSR(sn);
if(getSn_SR(sn) == SOCK_CLOSED) return SOCKERR_SOCKCLOSED;
if( (sock_io_mode & (1<<sn)) && (len > freesize) ) return SOCK_BUSY;
if(len <= freesize) break;
MICROPY_THREAD_YIELD();
};
wiz_send_data(sn, buf, len);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR(wizchip_getsubn());
#endif
setSn_CR(sn,Sn_CR_SEND);
/* wait to process the command... */
while(getSn_CR(sn));
while(1)
{
tmp = getSn_IR(sn);
if(tmp & Sn_IR_SENDOK)
{
setSn_IR(sn, Sn_IR_SENDOK);
break;
}
//M:20131104
//else if(tmp & Sn_IR_TIMEOUT) return SOCKERR_TIMEOUT;
else if(tmp & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR((uint8_t*)"\x00\x00\x00\x00");
#endif
return SOCKERR_TIMEOUT;
}
////////////
MICROPY_THREAD_YIELD();
}
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
setSUBR((uint8_t*)"\x00\x00\x00\x00");
#endif
return len;
}
int32_t WIZCHIP_EXPORT(recvfrom)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port)
{
uint8_t mr;
uint8_t head[8];
uint16_t pack_len=0;
CHECK_SOCKNUM();
//CHECK_SOCKMODE(Sn_MR_UDP);
switch((mr=getSn_MR(sn)) & 0x0F)
{
case Sn_MR_UDP:
case Sn_MR_MACRAW:
break;
#if ( _WIZCHIP_ < 5200 )
case Sn_MR_IPRAW:
case Sn_MR_PPPoE:
break;
#endif
default:
return SOCKERR_SOCKMODE;
}
CHECK_SOCKDATA();
if(sock_remained_size[sn] == 0)
{
while(1)
{
pack_len = getSn_RX_RSR(sn);
if(getSn_SR(sn) == SOCK_CLOSED) return SOCKERR_SOCKCLOSED;
if( (sock_io_mode & (1<<sn)) && (pack_len == 0) ) return SOCK_BUSY;
if(pack_len != 0) break;
MICROPY_THREAD_YIELD();
};
}
sock_pack_info[sn] = PACK_COMPLETED;
switch (mr & 0x07)
{
case Sn_MR_UDP :
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 8);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
// read peer's IP address, port number & packet length
addr[0] = head[0];
addr[1] = head[1];
addr[2] = head[2];
addr[3] = head[3];
*port = head[4];
*port = (*port << 8) + head[5];
sock_remained_size[sn] = head[6];
sock_remained_size[sn] = (sock_remained_size[sn] << 8) + head[7];
sock_pack_info[sn] = PACK_FIRST;
}
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
//
// Need to packet length check (default 1472)
//
wiz_recv_data(sn, buf, pack_len); // data copy.
break;
case Sn_MR_MACRAW :
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 2);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
// read peer's IP address, port number & packet length
sock_remained_size[sn] = head[0];
sock_remained_size[sn] = (sock_remained_size[sn] <<8) + head[1];
sock_remained_size[sn] -= 2; // len includes 2 len bytes
if(sock_remained_size[sn] > 1514)
{
WIZCHIP_EXPORT(close)(sn);
return SOCKFATAL_PACKLEN;
}
sock_pack_info[sn] = PACK_FIRST;
}
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
wiz_recv_data(sn,buf,pack_len);
break;
#if ( _WIZCHIP_ < 5200 )
case Sn_MR_IPRAW:
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 6);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
addr[0] = head[0];
addr[1] = head[1];
addr[2] = head[2];
addr[3] = head[3];
sock_remained_size[sn] = head[4];
sock_remaiend_size[sn] = (sock_remained_size[sn] << 8) + head[5];
sock_pack_info[sn] = PACK_FIRST;
}
//
// Need to packet length check
//
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
wiz_recv_data(sn, buf, pack_len); // data copy.
break;
#endif
default:
wiz_recv_ignore(sn, pack_len); // data copy.
sock_remained_size[sn] = pack_len;
break;
}
setSn_CR(sn,Sn_CR_RECV);
/* wait to process the command... */
while(getSn_CR(sn)) ;
sock_remained_size[sn] -= pack_len;
//M20140501 : replace 0x01 with PACK_REMAINED
//if(sock_remained_size[sn] != 0) sock_pack_info[sn] |= 0x01;
if(sock_remained_size[sn] != 0) sock_pack_info[sn] |= PACK_REMAINED;
//
return pack_len;
}
int8_t WIZCHIP_EXPORT(ctlsocket)(uint8_t sn, ctlsock_type cstype, void* arg)
{
uint8_t tmp = 0;
CHECK_SOCKNUM();
switch(cstype)
{
case CS_SET_IOMODE:
tmp = *((uint8_t*)arg);
if(tmp == SOCK_IO_NONBLOCK) sock_io_mode |= (1<<sn);
else if(tmp == SOCK_IO_BLOCK) sock_io_mode &= ~(1<<sn);
else return SOCKERR_ARG;
break;
case CS_GET_IOMODE:
//M20140501 : implict type casting -> explict type casting
//*((uint8_t*)arg) = (sock_io_mode >> sn) & 0x0001;
*((uint8_t*)arg) = (uint8_t)((sock_io_mode >> sn) & 0x0001);
//
break;
case CS_GET_MAXTXBUF:
*((uint16_t*)arg) = getSn_TxMAX(sn);
break;
case CS_GET_MAXRXBUF:
*((uint16_t*)arg) = getSn_RxMAX(sn);
break;
case CS_CLR_INTERRUPT:
if( (*(uint8_t*)arg) > SIK_ALL) return SOCKERR_ARG;
setSn_IR(sn,*(uint8_t*)arg);
break;
case CS_GET_INTERRUPT:
*((uint8_t*)arg) = getSn_IR(sn);
break;
case CS_SET_INTMASK:
if( (*(uint8_t*)arg) > SIK_ALL) return SOCKERR_ARG;
setSn_IMR(sn,*(uint8_t*)arg);
break;
case CS_GET_INTMASK:
*((uint8_t*)arg) = getSn_IMR(sn);
default:
return SOCKERR_ARG;
}
return SOCK_OK;
}
int8_t WIZCHIP_EXPORT(setsockopt)(uint8_t sn, sockopt_type sotype, void* arg)
{
// M20131220 : Remove warning
//uint8_t tmp;
CHECK_SOCKNUM();
switch(sotype)
{
case SO_TTL:
setSn_TTL(sn,*(uint8_t*)arg);
break;
case SO_TOS:
setSn_TOS(sn,*(uint8_t*)arg);
break;
case SO_MSS:
setSn_MSSR(sn,*(uint16_t*)arg);
break;
case SO_DESTIP:
setSn_DIPR(sn, (uint8_t*)arg);
break;
case SO_DESTPORT:
setSn_DPORT(sn, *(uint16_t*)arg);
break;
#if _WIZCHIP_ != 5100
case SO_KEEPALIVESEND:
CHECK_SOCKMODE(Sn_MR_TCP);
#if _WIZCHIP_ > 5200
if(getSn_KPALVTR(sn) != 0) return SOCKERR_SOCKOPT;
#endif
setSn_CR(sn,Sn_CR_SEND_KEEP);
while(getSn_CR(sn) != 0)
{
// M20131220
//if ((tmp = getSn_IR(sn)) & Sn_IR_TIMEOUT)
if (getSn_IR(sn) & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
return SOCKERR_TIMEOUT;
}
}
break;
#if _WIZCHIP_ > 5200
case SO_KEEPALIVEAUTO:
CHECK_SOCKMODE(Sn_MR_TCP);
setSn_KPALVTR(sn,*(uint8_t*)arg);
break;
#endif
#endif
default:
return SOCKERR_ARG;
}
return SOCK_OK;
}
int8_t WIZCHIP_EXPORT(getsockopt)(uint8_t sn, sockopt_type sotype, void* arg)
{
CHECK_SOCKNUM();
switch(sotype)
{
case SO_FLAG:
*(uint8_t*)arg = getSn_MR(sn) & 0xF0;
break;
case SO_TTL:
*(uint8_t*) arg = getSn_TTL(sn);
break;
case SO_TOS:
*(uint8_t*) arg = getSn_TOS(sn);
break;
case SO_MSS:
*(uint8_t*) arg = getSn_MSSR(sn);
case SO_DESTIP:
getSn_DIPR(sn, (uint8_t*)arg);
break;
case SO_DESTPORT:
*(uint16_t*) arg = getSn_DPORT(sn);
break;
#if _WIZCHIP_ > 5200
case SO_KEEPALIVEAUTO:
CHECK_SOCKMODE(Sn_MR_TCP);
*(uint16_t*) arg = getSn_KPALVTR(sn);
break;
#endif
case SO_SENDBUF:
*(uint16_t*) arg = getSn_TX_FSR(sn);
case SO_RECVBUF:
*(uint16_t*) arg = getSn_RX_RSR(sn);
case SO_STATUS:
*(uint8_t*) arg = getSn_SR(sn);
break;
case SO_REMAINSIZE:
if(getSn_MR(sn) == Sn_MR_TCP)
*(uint16_t*)arg = getSn_RX_RSR(sn);
else
*(uint16_t*)arg = sock_remained_size[sn];
break;
case SO_PACKINFO:
CHECK_SOCKMODE(Sn_MR_TCP);
*(uint8_t*)arg = sock_pack_info[sn];
break;
default:
return SOCKERR_SOCKOPT;
}
return SOCK_OK;
}

472
drivers/wiznet5k/ethernet/socket.h
Wyświetl plik

@ -1,472 +0,0 @@
//*****************************************************************************
//
//! \file socket.h
//! \brief SOCKET APIs Header file.
//! \details SOCKET APIs like as berkeley socket api.
//! \version 1.0.2
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.2. Refer to M20140501
//! 1. Modify the comment : SO_REMAINED -> PACK_REMAINED
//! 2. Add the comment as zero byte udp data reception in getsockopt().
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
/**
* @defgroup WIZnet_socket_APIs 1. WIZnet socket APIs
* @brief WIZnet socket APIs are based on Berkeley socket APIs, thus it has much similar name and interface.
* But there is a little bit of difference.
* @details
* <b> Comparison between WIZnet and Berkeley SOCKET APIs </b>
* <table>
* <tr> <td><b>API</b></td> <td><b>WIZnet</b></td> <td><b>Berkeley</b></td> </tr>
* <tr> <td>socket()</td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>bind()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>listen()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>connect()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>accept()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>recv()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>send()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>recvfrom()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>sendto()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>closesocket()</b></td> <td>O<br>close() & disconnect()</td> <td>O</td> </tr>
* </table>
* There are @b bind() and @b accept() functions in @b Berkeley SOCKET API but,
* not in @b WIZnet SOCKET API. Because socket() of WIZnet is not only creating a SOCKET but also binding a local port number,
* and listen() of WIZnet is not only listening to connection request from client but also accepting the connection request. \n
* When you program "TCP SERVER" with Berkeley SOCKET API, you can use only one listen port.
* When the listen SOCKET accepts a connection request from a client, it keeps listening.
* After accepting the connection request, a new SOCKET is created and the new SOCKET is used in communication with the client. \n
* Following figure shows network flow diagram by Berkeley SOCKET API.
* @image html Berkeley_SOCKET.jpg "<Berkeley SOCKET API>"
* But, When you program "TCP SERVER" with WIZnet SOCKET API, you can use as many as 8 listen SOCKET with same port number. \n
* Because there's no accept() in WIZnet SOCKET APIs, when the listen SOCKET accepts a connection request from a client,
* it is changed in order to communicate with the client.
* And the changed SOCKET is not listening any more and is dedicated for communicating with the client. \n
* If there're many listen SOCKET with same listen port number and a client requests a connection,
* the SOCKET which has the smallest SOCKET number accepts the request and is changed as communication SOCKET. \n
* Following figure shows network flow diagram by WIZnet SOCKET API.
* @image html WIZnet_SOCKET.jpg "<WIZnet SOCKET API>"
*/
#ifndef _WIZCHIP_SOCKET_H_
#define _WIZCHIP_SOCKET_H_
// use this macro for exported names to avoid name clashes
#define WIZCHIP_EXPORT(name) wizchip_ ## name
#include "wizchip_conf.h"
#define SOCKET uint8_t ///< SOCKET type define for legacy driver
#define SOCK_OK 1 ///< Result is OK about socket process.
#define SOCK_BUSY 0 ///< Socket is busy on processing the operation. Valid only Non-block IO Mode.
#define SOCK_FATAL -1000 ///< Result is fatal error about socket process.
#define SOCK_ERROR 0
#define SOCKERR_SOCKNUM (SOCK_ERROR - 1) ///< Invalid socket number
#define SOCKERR_SOCKOPT (SOCK_ERROR - 2) ///< Invalid socket option
#define SOCKERR_SOCKINIT (SOCK_ERROR - 3) ///< Socket is not initialized
#define SOCKERR_SOCKCLOSED (SOCK_ERROR - 4) ///< Socket unexpectedly closed.
#define SOCKERR_SOCKMODE (SOCK_ERROR - 5) ///< Invalid socket mode for socket operation.
#define SOCKERR_SOCKFLAG (SOCK_ERROR - 6) ///< Invalid socket flag
#define SOCKERR_SOCKSTATUS (SOCK_ERROR - 7) ///< Invalid socket status for socket operation.
#define SOCKERR_ARG (SOCK_ERROR - 10) ///< Invalid argument.
#define SOCKERR_PORTZERO (SOCK_ERROR - 11) ///< Port number is zero
#define SOCKERR_IPINVALID (SOCK_ERROR - 12) ///< Invalid IP address
#define SOCKERR_TIMEOUT (SOCK_ERROR - 13) ///< Timeout occurred
#define SOCKERR_DATALEN (SOCK_ERROR - 14) ///< Data length is zero or greater than buffer max size.
#define SOCKERR_BUFFER (SOCK_ERROR - 15) ///< Socket buffer is not enough for data communication.
#define SOCKFATAL_PACKLEN (SOCK_FATAL - 1) ///< Invalid packet length. Fatal Error.
/*
* SOCKET FLAG
*/
#define SF_ETHER_OWN (Sn_MR_MFEN) ///< In \ref Sn_MR_MACRAW, Receive only the packet as broadcast, multicast and own packet
#define SF_IGMP_VER2 (Sn_MR_MC) ///< In \ref Sn_MR_UDP with \ref SF_MULTI_ENABLE, Select IGMP version 2.
#define SF_TCP_NODELAY (Sn_MR_ND) ///< In \ref Sn_MR_TCP, Use to nodelayed ack.
#define SF_MULTI_ENABLE (Sn_MR_MULTI) ///< In \ref Sn_MR_UDP, Enable multicast mode.
#if _WIZCHIP_ == 5500
#define SF_BROAD_BLOCK (Sn_MR_BCASTB) ///< In \ref Sn_MR_UDP or \ref Sn_MR_MACRAW, Block broadcast packet. Valid only in W5500
#define SF_MULTI_BLOCK (Sn_MR_MMB) ///< In \ref Sn_MR_MACRAW, Block multicast packet. Valid only in W5500
#define SF_IPv6_BLOCK (Sn_MR_MIP6B) ///< In \ref Sn_MR_MACRAW, Block IPv6 packet. Valid only in W5500
#define SF_UNI_BLOCK (Sn_MR_UCASTB) ///< In \ref Sn_MR_UDP with \ref SF_MULTI_ENABLE. Valid only in W5500
#endif
#define SF_IO_NONBLOCK 0x01 ///< Socket nonblock io mode. It used parameter in \ref socket().
/*
* UDP & MACRAW Packet Infomation
*/
#define PACK_FIRST 0x80 ///< In Non-TCP packet, It indicates to start receiving a packet.
#define PACK_REMAINED 0x01 ///< In Non-TCP packet, It indicates to remain a packet to be received.
#define PACK_COMPLETED 0x00 ///< In Non-TCP packet, It indicates to complete to receive a packet.
// resets all global state associated with the socket interface
void WIZCHIP_EXPORT(socket_reset)(void);
/**
* @ingroup WIZnet_socket_APIs
* @brief Open a socket.
* @details Initializes the socket with 'sn' passed as parameter and open.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param protocol Protocol type to operate such as TCP, UDP and MACRAW.
* @param port Port number to be bined.
* @param flag Socket flags as \ref SF_ETHER_OWN, \ref SF_IGMP_VER2, \ref SF_TCP_NODELAY, \ref SF_MULTI_ENABLE, \ref SF_IO_NONBLOCK and so on.\n
* Valid flags only in W5500 : @ref SF_BROAD_BLOCK, @ref SF_MULTI_BLOCK, @ref SF_IPv6_BLOCK, and @ref SF_UNI_BLOCK.
* @sa Sn_MR
*
* @return @b Success : The socket number @b 'sn' passed as parameter\n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Not support socket mode as TCP, UDP, and so on. \n
* @ref SOCKERR_SOCKFLAG - Invaild socket flag.
*/
int8_t WIZCHIP_EXPORT(socket)(uint8_t sn, uint8_t protocol, uint16_t port, uint8_t flag);
/**
* @ingroup WIZnet_socket_APIs
* @brief Close a socket.
* @details It closes the socket with @b'sn' passed as parameter.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail : @ref SOCKERR_SOCKNUM - Invalid socket number
*/
int8_t WIZCHIP_EXPORT(close)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Listen to a connection request from a client.
* @details It is listening to a connection request from a client.
* If connection request is accepted successfully, the connection is established. Socket sn is used in passive(server) mode.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKINIT - Socket is not initialized \n
* @ref SOCKERR_SOCKCLOSED - Socket closed unexpectedly.
*/
int8_t WIZCHIP_EXPORT(listen)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to connect a server.
* @details It requests connection to the server with destination IP address and port number passed as parameter.\n
* @note It is valid only in TCP client mode.
* In block io mode, it does not return until connection is completed.
* In Non-block io mode, it return @ref SOCK_BUSY immediately.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Invalid socket mode\n
* @ref SOCKERR_SOCKINIT - Socket is not initialized\n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_TIMEOUT - Timeout occurred during request connection\n
* @ref SOCK_BUSY - In non-block io mode, it returned immediately\n
*/
int8_t WIZCHIP_EXPORT(connect)(uint8_t sn, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to disconnect a connection socket.
* @details It sends request message to disconnect the TCP socket 'sn' passed as parameter to the server or client.
* @note It is valid only in TCP server or client mode. \n
* In block io mode, it does not return until disconnection is completed. \n
* In Non-block io mode, it return @ref SOCK_BUSY immediately. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int8_t WIZCHIP_EXPORT(disconnect)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Send data to the connected peer in TCP socket.
* @details It is used to send outgoing data to the connected socket.
* @note It is valid only in TCP server or client mode. It can't send data greater than socket buffer size. \n
* In block io mode, It doesn't return until data send is completed - socket buffer size is greater than data. \n
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer containing data to be sent.
* @param len The byte length of data in buf.
* @return @b Success : The sent data size \n
* @b Fail : \n @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(send)(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive data from the connected peer.
* @details It is used to read incoming data from the connected socket.\n
* It waits for data as much as the application wants to receive.
* @note It is valid only in TCP server or client mode. It can't receive data greater than socket buffer size. \n
* In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer. \n
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer. \n
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* @return @b Success : The real received data size \n
* @b Fail :\n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(recv)(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Sends datagram to the peer with destination IP address and port number passed as parameter.
* @details It sends datagram of UDP or MACRAW to the peer with destination IP address and port number passed as parameter.\n
* Even if the connectionless socket has been previously connected to a specific address,
* the address and port number parameters override the destination address for that particular datagram only.
* @note In block io mode, It doesn't return until data send is completed - socket buffer size is greater than <I>len</I>.
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to send outgoing data.
* @param len The byte length of data in buf.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : The sent data size \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_SOCKCLOSED - Socket unexpectedly closed \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(sendto)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive datagram of UDP or MACRAW
* @details This function is an application I/F function which is used to receive the data in other then TCP mode. \n
* This function is used to receive UDP and MAC_RAW mode, and handle the header as well.
* This function can divide to received the packet data.
* On the MACRAW SOCKET, the addr and port parameters are ignored.
* @note In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* When the received packet size <= len, receives data as packet sized.
* When others, receives data as len.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* It is valid only when the first call recvfrom for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
* @param port Pointer variable of destination port number.
* It is valid only when the first call recvform for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
*
* @return @b Success : This function return real received data size for success.\n
* @b Fail : @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKBUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(recvfrom)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port);
/////////////////////////////
// SOCKET CONTROL & OPTION //
/////////////////////////////
#define SOCK_IO_BLOCK 0 ///< Socket Block IO Mode in @ref setsockopt().
#define SOCK_IO_NONBLOCK 1 ///< Socket Non-block IO Mode in @ref setsockopt().
/**
* @defgroup DATA_TYPE DATA TYPE
*/
/**
* @ingroup DATA_TYPE
* @brief The kind of Socket Interrupt.
* @sa Sn_IR, Sn_IMR, setSn_IR(), getSn_IR(), setSn_IMR(), getSn_IMR()
*/
typedef enum
{
SIK_CONNECTED = (1 << 0), ///< connected
SIK_DISCONNECTED = (1 << 1), ///< disconnected
SIK_RECEIVED = (1 << 2), ///< data received
SIK_TIMEOUT = (1 << 3), ///< timeout occurred
SIK_SENT = (1 << 4), ///< send ok
SIK_ALL = 0x1F, ///< all interrupt
}sockint_kind;
/**
* @ingroup DATA_TYPE
* @brief The type of @ref ctlsocket().
*/
typedef enum
{
CS_SET_IOMODE, ///< set socket IO mode with @ref SOCK_IO_BLOCK or @ref SOCK_IO_NONBLOCK
CS_GET_IOMODE, ///< get socket IO mode
CS_GET_MAXTXBUF, ///< get the size of socket buffer allocated in TX memory
CS_GET_MAXRXBUF, ///< get the size of socket buffer allocated in RX memory
CS_CLR_INTERRUPT, ///< clear the interrupt of socket with @ref sockint_kind
CS_GET_INTERRUPT, ///< get the socket interrupt. refer to @ref sockint_kind
CS_SET_INTMASK, ///< set the interrupt mask of socket with @ref sockint_kind
CS_GET_INTMASK ///< get the masked interrupt of socket. refer to @ref sockint_kind
}ctlsock_type;
/**
* @ingroup DATA_TYPE
* @brief The type of socket option in @ref setsockopt() or @ref getsockopt()
*/
typedef enum
{
SO_FLAG, ///< Valid only in getsockopt(), For set flag of socket refer to <I>flag</I> in @ref socket().
SO_TTL, ///< Set/Get TTL. @ref Sn_TTL ( @ref setSn_TTL(), @ref getSn_TTL() )
SO_TOS, ///< Set/Get TOS. @ref Sn_TOS ( @ref setSn_TOS(), @ref getSn_TOS() )
SO_MSS, ///< Set/Get MSS. @ref Sn_MSSR ( @ref setSn_MSSR(), @ref getSn_MSSR() )
SO_DESTIP, ///< Set/Get the destination IP address. @ref Sn_DIPR ( @ref setSn_DIPR(), @ref getSn_DIPR() )
SO_DESTPORT, ///< Set/Get the destination Port number. @ref Sn_DPORT ( @ref setSn_DPORT(), @ref getSn_DPORT() )
#if _WIZCHIP_ != 5100
SO_KEEPALIVESEND, ///< Valid only in setsockopt. Manually send keep-alive packet in TCP mode
#if _WIZCHIP_ > 5200
SO_KEEPALIVEAUTO, ///< Set/Get keep-alive auto transmission timer in TCP mode
#endif
#endif
SO_SENDBUF, ///< Valid only in getsockopt. Get the free data size of Socekt TX buffer. @ref Sn_TX_FSR, @ref getSn_TX_FSR()
SO_RECVBUF, ///< Valid only in getsockopt. Get the received data size in socket RX buffer. @ref Sn_RX_RSR, @ref getSn_RX_RSR()
SO_STATUS, ///< Valid only in getsockopt. Get the socket status. @ref Sn_SR, @ref getSn_SR()
SO_REMAINSIZE, ///< Valid only in getsockopt. Get the remained packet size in other then TCP mode.
SO_PACKINFO ///< Valid only in getsockopt. Get the packet information as @ref PACK_FIRST, @ref PACK_REMAINED, and @ref PACK_COMPLETED in other then TCP mode.
}sockopt_type;
/**
* @ingroup WIZnet_socket_APIs
* @brief Control socket.
* @details Control IO mode, Interrupt & Mask of socket and get the socket buffer information.
* Refer to @ref ctlsock_type.
* @param sn socket number
* @param cstype type of control socket. refer to @ref ctlsock_type.
* @param arg Data type and value is determined according to @ref ctlsock_type. \n
* <table>
* <tr> <td> @b cstype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref CS_SET_IOMODE \n @ref CS_GET_IOMODE </td> <td> uint8_t </td><td>@ref SOCK_IO_BLOCK @ref SOCK_IO_NONBLOCK</td></tr>
* <tr> <td> @ref CS_GET_MAXTXBUF \n @ref CS_GET_MAXRXBUF </td> <td> uint16_t </td><td> 0 ~ 16K </td></tr>
* <tr> <td> @ref CS_CLR_INTERRUPT \n @ref CS_GET_INTERRUPT \n @ref CS_SET_INTMASK \n @ref CS_GET_INTMASK </td> <td> @ref sockint_kind </td><td> @ref SIK_CONNECTED, etc. </td></tr>
* </table>
* @return @b Success @ref SOCK_OK \n
* @b fail @ref SOCKERR_ARG - Invalid argument\n
*/
int8_t WIZCHIP_EXPORT(ctlsocket)(uint8_t sn, ctlsock_type cstype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief set socket options
* @details Set socket option like as TTL, MSS, TOS, and so on. Refer to @ref sockopt_type.
*
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_TTL </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_KEEPALIVESEND </td> <td> null </td><td> null </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_TIMEOUT - Timeout occurred when sending keep-alive packet \n
*/
int8_t WIZCHIP_EXPORT(setsockopt)(uint8_t sn, sockopt_type sotype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief get socket options
* @details Get socket option like as FLAG, TTL, MSS, and so on. Refer to @ref sockopt_type
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td>@b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_FLAG </td> <td> uint8_t </td><td> @ref SF_ETHER_OWN, etc... </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* <tr> <td> @ref SO_SENDBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_RECVBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_STATUS </td> <td> uint8_t </td><td> @ref SOCK_ESTABLISHED, etc.. </td></tr>
* <tr> <td> @ref SO_REMAINSIZE </td> <td> uint16_t </td><td> 0~ 65535 </td></tr>
* <tr> <td> @ref SO_PACKINFO </td> <td> uint8_t </td><td> @ref PACK_FIRST, etc... </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* @note
* The option as PACK_REMAINED and SO_PACKINFO is valid only in NON-TCP mode and after call @ref recvfrom(). \n
* When SO_PACKINFO value is PACK_FIRST and the return value of recvfrom() is zero,
* This means the zero byte UDP data(UDP Header only) received.
*/
int8_t WIZCHIP_EXPORT(getsockopt)(uint8_t sn, sockopt_type sotype, void* arg);
#endif // _WIZCHIP_SOCKET_H_

215
drivers/wiznet5k/ethernet/w5200/w5200.c
Wyświetl plik

@ -1,215 +0,0 @@
// dpgeorge: this file taken from w5500/w5500.c and adapted to W5200
//*****************************************************************************
//
//! \file w5500.c
//! \brief W5500 HAL Interface.
//! \version 1.0.1
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.2
//! 1. Implicit type casting -> Explicit type casting. Refer to M20140501
//! Fixed the problem on porting into under 32bit MCU
//! Issued by Mathias ClauBen, wizwiki forum ID Think01 and bobh
//! Thank for your interesting and serious advices.
//! <2013/10/21> 1st Release
//! <2013/12/20> V1.0.1
//! 1. Remove warning
//! 2. WIZCHIP_READ_BUF WIZCHIP_WRITE_BUF in case _WIZCHIP_IO_MODE_SPI_FDM_
//! for loop optimized(removed). refer to M20131220
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#include "w5200.h"
#if WIZCHIP_USE_MAX_BUFFER
// This option is intended to be used when MACRAW mode is enabled, to allow
// the single raw socket to use all the available buffer space.
#define SMASK (16 * 1024 - 1) /* tx buffer mask */
#define RMASK (16 * 1024 - 1) /* rx buffer mask */
#define SSIZE (16 * 1024) /* max tx buffer size */
#define RSIZE (16 * 1024) /* max rx buffer size */
#else
#define SMASK (0x7ff) /* tx buffer mask */
#define RMASK (0x7ff) /* rx buffer mask */
#define SSIZE (2048) /* max tx buffer size */
#define RSIZE (2048) /* max rx buffer size */
#endif
#define TXBUF_BASE (0x8000)
#define RXBUF_BASE (0xc000)
#define SBASE(sn) (TXBUF_BASE + SSIZE * (sn)) /* tx buffer base for socket sn */
#define RBASE(sn) (RXBUF_BASE + RSIZE * (sn)) /* rx buffer base for socket sn */
uint8_t WIZCHIP_READ(uint32_t AddrSel) {
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
uint8_t spi_data[4] = {
AddrSel >> 8,
AddrSel,
0x00,
0x01,
};
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
uint8_t ret;
WIZCHIP.IF.SPI._read_bytes(&ret, 1);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
return ret;
}
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb) {
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
uint8_t spi_data[5] = {
AddrSel >> 8,
AddrSel,
0x80,
0x01,
wb,
};
WIZCHIP.IF.SPI._write_bytes(spi_data, 5);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_READ_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len) {
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
uint8_t spi_data[4] = {
AddrSel >> 8,
AddrSel,
0x00 | ((len >> 8) & 0x7f),
len & 0xff,
};
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
WIZCHIP.IF.SPI._read_bytes(pBuf, len);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len) {
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
uint8_t spi_data[4] = {
AddrSel >> 8,
AddrSel,
0x80 | ((len >> 8) & 0x7f),
len & 0xff,
};
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
WIZCHIP.IF.SPI._write_bytes(pBuf, len);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
uint16_t getSn_TX_FSR(uint8_t sn) {
uint16_t val = 0, val1 = 0;
do {
val1 = (WIZCHIP_READ(Sn_TX_FSR(sn)) << 8) | WIZCHIP_READ(Sn_TX_FSR(sn) + 1);
if (val1 != 0) {
val = (WIZCHIP_READ(Sn_TX_FSR(sn)) << 8) | WIZCHIP_READ(Sn_TX_FSR(sn) + 1);
}
} while (val != val1);
return val;
}
uint16_t getSn_RX_RSR(uint8_t sn) {
uint16_t val = 0, val1 = 0;
do {
val1 = (WIZCHIP_READ(Sn_RX_RSR(sn)) << 8) | WIZCHIP_READ(Sn_RX_RSR(sn) + 1);
if (val1 != 0) {
val = (WIZCHIP_READ(Sn_RX_RSR(sn)) << 8) | WIZCHIP_READ(Sn_RX_RSR(sn) + 1);
}
} while (val != val1);
return val;
}
void wiz_send_data(uint8_t sn, uint8_t *wizdata, uint16_t len) {
if (len == 0) {
return;
}
uint16_t ptr = getSn_TX_WR(sn);
uint16_t offset = ptr & SMASK;
uint32_t addr = offset + SBASE(sn);
if (offset + len > SSIZE) {
// implement wrap-around circular buffer
uint16_t size = SSIZE - offset;
WIZCHIP_WRITE_BUF(addr, wizdata, size);
WIZCHIP_WRITE_BUF(SBASE(sn), wizdata + size, len - size);
} else {
WIZCHIP_WRITE_BUF(addr, wizdata, len);
}
ptr += len;
setSn_TX_WR(sn, ptr);
}
void wiz_recv_data(uint8_t sn, uint8_t *wizdata, uint16_t len) {
if (len == 0) {
return;
}
uint16_t ptr = getSn_RX_RD(sn);
uint16_t offset = ptr & RMASK;
uint16_t addr = RBASE(sn) + offset;
if (offset + len > RSIZE) {
// implement wrap-around circular buffer
uint16_t size = RSIZE - offset;
WIZCHIP_READ_BUF(addr, wizdata, size);
WIZCHIP_READ_BUF(RBASE(sn), wizdata + size, len - size);
} else {
WIZCHIP_READ_BUF(addr, wizdata, len);
}
ptr += len;
setSn_RX_RD(sn, ptr);
}
void wiz_recv_ignore(uint8_t sn, uint16_t len) {
uint16_t ptr = getSn_RX_RD(sn);
ptr += len;
setSn_RX_RD(sn, ptr);
}

2092
drivers/wiznet5k/ethernet/w5200/w5200.h
Wyświetl plik

Plik diff jest za duży Load Diff

247
drivers/wiznet5k/ethernet/w5500/w5500.c
Wyświetl plik

@ -1,247 +0,0 @@
//*****************************************************************************
//
//! \file w5500.c
//! \brief W5500 HAL Interface.
//! \version 1.0.1
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.2
//! 1. Implicit type casting -> Explicit type casting. Refer to M20140501
//! Fixed the problem on porting into under 32bit MCU
//! Issued by Mathias ClauBen, wizwiki forum ID Think01 and bobh
//! Thank for your interesting and serious advices.
//! <2013/10/21> 1st Release
//! <2013/12/20> V1.0.1
//! 1. Remove warning
//! 2. WIZCHIP_READ_BUF WIZCHIP_WRITE_BUF in case _WIZCHIP_IO_MODE_SPI_FDM_
//! for loop optimized(removed). refer to M20131220
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
//#include <stdio.h>
#include "w5500.h"
#define _W5500_SPI_VDM_OP_ 0x00
#define _W5500_SPI_FDM_OP_LEN1_ 0x01
#define _W5500_SPI_FDM_OP_LEN2_ 0x02
#define _W5500_SPI_FDM_OP_LEN4_ 0x03
////////////////////////////////////////////////////
#define LPC_SSP0 (0)
static void Chip_SSP_ReadFrames_Blocking(int dummy, uint8_t *buf, uint32_t len) {
WIZCHIP.IF.SPI._read_bytes(buf, len);
}
static void Chip_SSP_WriteFrames_Blocking(int dummy, const uint8_t *buf, uint32_t len) {
WIZCHIP.IF.SPI._write_bytes(buf, len);
}
uint8_t WIZCHIP_READ(uint32_t AddrSel)
{
uint8_t ret;
uint8_t spi_data[3];
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_READ_ | _W5500_SPI_VDM_OP_);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
//ret = WIZCHIP.IF.SPI._read_byte();
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
Chip_SSP_WriteFrames_Blocking(LPC_SSP0, spi_data, 3);
Chip_SSP_ReadFrames_Blocking(LPC_SSP0, &ret, 1);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
return ret;
}
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb )
{
uint8_t spi_data[4];
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_WRITE_ | _W5500_SPI_VDM_OP_);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
//WIZCHIP.IF.SPI._write_byte(wb);
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
spi_data[3] = wb;
Chip_SSP_WriteFrames_Blocking(LPC_SSP0, spi_data, 4);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_READ_BUF (uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
{
uint8_t spi_data[3];
//uint16_t i;
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_READ_ | _W5500_SPI_VDM_OP_);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
//for(i = 0; i < len; i++)
// pBuf[i] = WIZCHIP.IF.SPI._read_byte();
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
Chip_SSP_WriteFrames_Blocking(LPC_SSP0, spi_data, 3);
Chip_SSP_ReadFrames_Blocking(LPC_SSP0, pBuf, len);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
{
uint8_t spi_data[3];
//uint16_t i;
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_WRITE_ | _W5500_SPI_VDM_OP_);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
//WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
//for(i = 0; i < len; i++)
// WIZCHIP.IF.SPI._write_byte(pBuf[i]);
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
Chip_SSP_WriteFrames_Blocking(LPC_SSP0, spi_data, 3);
Chip_SSP_WriteFrames_Blocking(LPC_SSP0, pBuf, len);
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
uint16_t getSn_TX_FSR(uint8_t sn)
{
uint16_t val=0,val1=0;
do
{
val1 = WIZCHIP_READ(Sn_TX_FSR(sn));
val1 = (val1 << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_TX_FSR(sn),1));
if (val1 != 0)
{
val = WIZCHIP_READ(Sn_TX_FSR(sn));
val = (val << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_TX_FSR(sn),1));
}
}while (val != val1);
return val;
}
uint16_t getSn_RX_RSR(uint8_t sn)
{
uint16_t val=0,val1=0;
do
{
val1 = WIZCHIP_READ(Sn_RX_RSR(sn));
val1 = (val1 << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_RX_RSR(sn),1));
if (val1 != 0)
{
val = WIZCHIP_READ(Sn_RX_RSR(sn));
val = (val << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_RX_RSR(sn),1));
}
}while (val != val1);
return val;
}
void wiz_send_data(uint8_t sn, uint8_t *wizdata, uint16_t len)
{
uint16_t ptr = 0;
uint32_t addrsel = 0;
if(len == 0) return;
ptr = getSn_TX_WR(sn);
//M20140501 : implict type casting -> explict type casting
//addrsel = (ptr << 8) + (WIZCHIP_TXBUF_BLOCK(sn) << 3);
addrsel = ((uint32_t)ptr << 8) + (WIZCHIP_TXBUF_BLOCK(sn) << 3);
//
WIZCHIP_WRITE_BUF(addrsel,wizdata, len);
ptr += len;
setSn_TX_WR(sn,ptr);
}
void wiz_recv_data(uint8_t sn, uint8_t *wizdata, uint16_t len)
{
uint16_t ptr = 0;
uint32_t addrsel = 0;
if(len == 0) return;
ptr = getSn_RX_RD(sn);
//M20140501 : implict type casting -> explict type casting
//addrsel = ((ptr << 8) + (WIZCHIP_RXBUF_BLOCK(sn) << 3);
addrsel = ((uint32_t)ptr << 8) + (WIZCHIP_RXBUF_BLOCK(sn) << 3);
//
WIZCHIP_READ_BUF(addrsel, wizdata, len);
ptr += len;
setSn_RX_RD(sn,ptr);
}
void wiz_recv_ignore(uint8_t sn, uint16_t len)
{
uint16_t ptr = 0;
ptr = getSn_RX_RD(sn);
ptr += len;
setSn_RX_RD(sn,ptr);
}

2057
drivers/wiznet5k/ethernet/w5500/w5500.h
Wyświetl plik

Plik diff jest za duży Load Diff

662
drivers/wiznet5k/ethernet/wizchip_conf.c
Wyświetl plik

@ -1,662 +0,0 @@
//****************************************************************************/
//!
//! \file wizchip_conf.c
//! \brief WIZCHIP Config Header File.
//! \version 1.0.1
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.1 Refer to M20140501
//! 1. Explicit type casting in wizchip_bus_readbyte() & wizchip_bus_writebyte()
// Issued by Mathias ClauBen.
//! uint32_t type converts into ptrdiff_t first. And then recoverting it into uint8_t*
//! For remove the warning when pointer type size is not 32bit.
//! If ptrdiff_t doesn't support in your complier, You should must replace ptrdiff_t into your suitable pointer type.
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************/
//A20140501 : for use the type - ptrdiff_t
#include <stddef.h>
//
#include "wizchip_conf.h"
#include "socket.h"
/**
* @brief Default function to enable interrupt.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_cris_enter(void) {};
/**
* @brief Default function to disable interrupt.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_cris_exit(void) {};
/**
* @brief Default function to select chip.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_cs_select(void) {};
/**
* @brief Default function to deselect chip.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_cs_deselect(void) {};
/**
* @brief Default function to read in direct or indirect interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//M20140501 : Explict pointer type casting
//uint8_t wizchip_bus_readbyte(uint32_t AddrSel) { return * ((volatile uint8_t *) AddrSel); };
uint8_t wizchip_bus_readbyte(uint32_t AddrSel) { return * ((volatile uint8_t *)((ptrdiff_t) AddrSel)); };
/**
* @brief Default function to write in direct or indirect interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//M20140501 : Explict pointer type casting
//void wizchip_bus_writebyte(uint32_t AddrSel, uint8_t wb) { *((volatile uint8_t*) AddrSel) = wb; };
void wizchip_bus_writebyte(uint32_t AddrSel, uint8_t wb) { *((volatile uint8_t*)((ptrdiff_t)AddrSel)) = wb; };
/**
* @brief Default function to read in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_spi_readbytes(uint8_t *buf, uint32_t len) {}
/**
* @brief Default function to write in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
void wizchip_spi_writebytes(const uint8_t *buf, uint32_t len) {}
/**
* @\ref _WIZCHIP instance
*/
_WIZCHIP WIZCHIP =
{
.id = _WIZCHIP_ID_,
.if_mode = _WIZCHIP_IO_MODE_,
.CRIS._enter = wizchip_cris_enter,
.CRIS._exit = wizchip_cris_exit,
.CS._select = wizchip_cs_select,
.CS._deselect = wizchip_cs_deselect,
.IF.BUS._read_byte = wizchip_bus_readbyte,
.IF.BUS._write_byte = wizchip_bus_writebyte
// .IF.SPI._read_byte = wizchip_spi_readbyte,
// .IF.SPI._write_byte = wizchip_spi_writebyte
};
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
static uint8_t _SUBN_[4]; // subnet
#endif
static uint8_t _DNS_[4]; // DNS server ip address
static dhcp_mode _DHCP_; // DHCP mode
void reg_wizchip_cris_cbfunc(void(*cris_en)(void), void(*cris_ex)(void))
{
if(!cris_en || !cris_ex)
{
WIZCHIP.CRIS._enter = wizchip_cris_enter;
WIZCHIP.CRIS._exit = wizchip_cris_exit;
}
else
{
WIZCHIP.CRIS._enter = cris_en;
WIZCHIP.CRIS._exit = cris_ex;
}
}
void reg_wizchip_cs_cbfunc(void(*cs_sel)(void), void(*cs_desel)(void))
{
if(!cs_sel || !cs_desel)
{
WIZCHIP.CS._select = wizchip_cs_select;
WIZCHIP.CS._deselect = wizchip_cs_deselect;
}
else
{
WIZCHIP.CS._select = cs_sel;
WIZCHIP.CS._deselect = cs_desel;
}
}
void reg_wizchip_bus_cbfunc(uint8_t(*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, uint8_t wb))
{
while(!(WIZCHIP.if_mode & _WIZCHIP_IO_MODE_BUS_));
if(!bus_rb || !bus_wb)
{
WIZCHIP.IF.BUS._read_byte = wizchip_bus_readbyte;
WIZCHIP.IF.BUS._write_byte = wizchip_bus_writebyte;
}
else
{
WIZCHIP.IF.BUS._read_byte = bus_rb;
WIZCHIP.IF.BUS._write_byte = bus_wb;
}
}
void reg_wizchip_spi_cbfunc(void (*spi_rb)(uint8_t *, uint32_t), void (*spi_wb)(const uint8_t *, uint32_t))
{
while(!(WIZCHIP.if_mode & _WIZCHIP_IO_MODE_SPI_));
if(!spi_rb || !spi_wb)
{
WIZCHIP.IF.SPI._read_bytes = wizchip_spi_readbytes;
WIZCHIP.IF.SPI._write_bytes = wizchip_spi_writebytes;
}
else
{
WIZCHIP.IF.SPI._read_bytes = spi_rb;
WIZCHIP.IF.SPI._write_bytes = spi_wb;
}
}
int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg)
{
uint8_t tmp = 0;
uint8_t* ptmp[2] = {0,0};
switch(cwtype)
{
case CW_RESET_WIZCHIP:
wizchip_sw_reset();
break;
case CW_INIT_WIZCHIP:
if(arg != 0)
{
ptmp[0] = (uint8_t*)arg;
ptmp[1] = ptmp[0] + _WIZCHIP_SOCK_NUM_;
}
return wizchip_init(ptmp[0], ptmp[1]);
case CW_CLR_INTERRUPT:
wizchip_clrinterrupt(*((intr_kind*)arg));
break;
case CW_GET_INTERRUPT:
*((intr_kind*)arg) = wizchip_getinterrupt();
break;
case CW_SET_INTRMASK:
wizchip_setinterruptmask(*((intr_kind*)arg));
break;
case CW_GET_INTRMASK:
*((intr_kind*)arg) = wizchip_getinterruptmask();
break;
#if _WIZCHIP_ > 5100
case CW_SET_INTRTIME:
setINTLEVEL(*(uint16_t*)arg);
break;
case CW_GET_INTRTIME:
*(uint16_t*)arg = getINTLEVEL();
break;
#endif
case CW_GET_ID:
((uint8_t*)arg)[0] = WIZCHIP.id[0];
((uint8_t*)arg)[1] = WIZCHIP.id[1];
((uint8_t*)arg)[2] = WIZCHIP.id[2];
((uint8_t*)arg)[3] = WIZCHIP.id[3];
((uint8_t*)arg)[4] = WIZCHIP.id[4];
((uint8_t*)arg)[5] = 0;
break;
#if _WIZCHIP_ == 5500
case CW_RESET_PHY:
wizphy_reset();
break;
case CW_SET_PHYCONF:
wizphy_setphyconf((wiz_PhyConf*)arg);
break;
case CW_GET_PHYCONF:
wizphy_getphyconf((wiz_PhyConf*)arg);
break;
case CW_GET_PHYSTATUS:
break;
case CW_SET_PHYPOWMODE:
return wizphy_setphypmode(*(uint8_t*)arg);
#endif
case CW_GET_PHYPOWMODE:
tmp = wizphy_getphypmode();
if((int8_t)tmp == -1) return -1;
*(uint8_t*)arg = tmp;
break;
case CW_GET_PHYLINK:
tmp = wizphy_getphylink();
if((int8_t)tmp == -1) return -1;
*(uint8_t*)arg = tmp;
break;
default:
return -1;
}
return 0;
}
int8_t ctlnetwork(ctlnetwork_type cntype, void* arg)
{
switch(cntype)
{
case CN_SET_NETINFO:
wizchip_setnetinfo((wiz_NetInfo*)arg);
break;
case CN_GET_NETINFO:
wizchip_getnetinfo((wiz_NetInfo*)arg);
break;
case CN_SET_NETMODE:
return wizchip_setnetmode(*(netmode_type*)arg);
case CN_GET_NETMODE:
*(netmode_type*)arg = wizchip_getnetmode();
break;
case CN_SET_TIMEOUT:
wizchip_settimeout((wiz_NetTimeout*)arg);
break;
case CN_GET_TIMEOUT:
wizchip_gettimeout((wiz_NetTimeout*)arg);
break;
default:
return -1;
}
return 0;
}
void wizchip_sw_reset(void)
{
uint8_t gw[4], sn[4], sip[4];
uint8_t mac[6];
getSHAR(mac);
getGAR(gw); getSUBR(sn); getSIPR(sip);
setMR(MR_RST);
getMR(); // for delay
setSHAR(mac);
setGAR(gw);
setSUBR(sn);
setSIPR(sip);
}
int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize)
{
int8_t i;
int8_t tmp = 0;
wizchip_sw_reset();
if(txsize)
{
tmp = 0;
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
tmp += txsize[i];
if(tmp > 16) return -1;
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
setSn_TXBUF_SIZE(i, txsize[i]);
}
if(rxsize)
{
tmp = 0;
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
tmp += rxsize[i];
if(tmp > 16) return -1;
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
setSn_RXBUF_SIZE(i, rxsize[i]);
}
WIZCHIP_EXPORT(socket_reset)();
return 0;
}
void wizchip_clrinterrupt(intr_kind intr)
{
uint8_t ir = (uint8_t)intr;
uint8_t sir = (uint8_t)((uint16_t)intr >> 8);
#if _WIZCHIP_ < 5500
ir |= (1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == 5200
ir |= (1 << 6);
#endif
#if _WIZCHIP_ < 5200
sir &= 0x0F;
#endif
#if _WIZCHIP_ == 5100
ir |= sir;
setIR(ir);
#else
setIR(ir);
setSIR(sir);
#endif
}
intr_kind wizchip_getinterrupt(void)
{
uint8_t ir = 0;
uint8_t sir = 0;
uint16_t ret = 0;
#if _WIZCHIP_ == 5100
ir = getIR();
sir = ir 0x0F;
#else
ir = getIR();
sir = getSIR();
#endif
#if _WIZCHIP_ < 5500
ir &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == 5200
ir &= ~(1 << 6);
#endif
ret = sir;
ret = (ret << 8) + ir;
return (intr_kind)ret;
}
void wizchip_setinterruptmask(intr_kind intr)
{
uint8_t imr = (uint8_t)intr;
uint8_t simr = (uint8_t)((uint16_t)intr >> 8);
#if _WIZCHIP_ < 5500
imr &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == 5200
imr &= ~(1 << 6);
#endif
#if _WIZCHIP_ < 5200
simr &= 0x0F;
#endif
#if _WIZCHIP_ == 5100
imr |= simr;
setIMR(imr);
#else
setIMR(imr);
setSIMR(simr);
#endif
}
intr_kind wizchip_getinterruptmask(void)
{
uint8_t imr = 0;
uint8_t simr = 0;
uint16_t ret = 0;
#if _WIZCHIP_ == 5100
imr = getIMR();
simr = imr 0x0F;
#else
imr = getIMR();
simr = getSIMR();
#endif
#if _WIZCHIP_ < 5500
imr &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == 5200
imr &= ~(1 << 6); // IK_DEST_UNREACH
#endif
ret = simr;
ret = (ret << 8) + imr;
return (intr_kind)ret;
}
int8_t wizphy_getphylink(void)
{
int8_t tmp;
#if _WIZCHIP_ == 5200
if(getPHYSTATUS() & PHYSTATUS_LINK)
tmp = PHY_LINK_ON;
else
tmp = PHY_LINK_OFF;
#elif _WIZCHIP_ == 5500
if(getPHYCFGR() & PHYCFGR_LNK_ON)
tmp = PHY_LINK_ON;
else
tmp = PHY_LINK_OFF;
#else
tmp = -1;
#endif
return tmp;
}
#if _WIZCHIP_ > 5100
int8_t wizphy_getphypmode(void)
{
int8_t tmp = 0;
#if _WIZCHIP_ == 5200
if(getPHYSTATUS() & PHYSTATUS_POWERDOWN)
tmp = PHY_POWER_DOWN;
else
tmp = PHY_POWER_NORM;
#elif _WIZCHIP_ == 5500
if(getPHYCFGR() & PHYCFGR_OPMDC_PDOWN)
tmp = PHY_POWER_DOWN;
else
tmp = PHY_POWER_NORM;
#else
tmp = -1;
#endif
return tmp;
}
#endif
#if _WIZCHIP_ == 5500
void wizphy_reset(void)
{
uint8_t tmp = getPHYCFGR();
tmp &= PHYCFGR_RST;
setPHYCFGR(tmp);
tmp = getPHYCFGR();
tmp |= ~PHYCFGR_RST;
setPHYCFGR(tmp);
}
void wizphy_setphyconf(wiz_PhyConf* phyconf)
{
uint8_t tmp = 0;
if(phyconf->by == PHY_CONFBY_SW)
tmp |= PHYCFGR_OPMD;
else
tmp &= ~PHYCFGR_OPMD;
if(phyconf->mode == PHY_MODE_AUTONEGO)
tmp |= PHYCFGR_OPMDC_ALLA;
else
{
if(phyconf->duplex == PHY_DUPLEX_FULL)
{
if(phyconf->speed == PHY_SPEED_100)
tmp |= PHYCFGR_OPMDC_100F;
else
tmp |= PHYCFGR_OPMDC_10F;
}
else
{
if(phyconf->speed == PHY_SPEED_100)
tmp |= PHYCFGR_OPMDC_100H;
else
tmp |= PHYCFGR_OPMDC_10H;
}
}
setPHYCFGR(tmp);
wizphy_reset();
}
void wizphy_getphyconf(wiz_PhyConf* phyconf)
{
uint8_t tmp = 0;
tmp = getPHYCFGR();
phyconf->by = (tmp & PHYCFGR_OPMD) ? PHY_CONFBY_SW : PHY_CONFBY_HW;
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_ALLA:
case PHYCFGR_OPMDC_100FA:
phyconf->mode = PHY_MODE_AUTONEGO;
break;
default:
phyconf->mode = PHY_MODE_MANUAL;
break;
}
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_100FA:
case PHYCFGR_OPMDC_100F:
case PHYCFGR_OPMDC_100H:
phyconf->speed = PHY_SPEED_100;
break;
default:
phyconf->speed = PHY_SPEED_10;
break;
}
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_100FA:
case PHYCFGR_OPMDC_100F:
case PHYCFGR_OPMDC_10F:
phyconf->duplex = PHY_DUPLEX_FULL;
break;
default:
phyconf->duplex = PHY_DUPLEX_HALF;
break;
}
}
void wizphy_getphystat(wiz_PhyConf* phyconf)
{
uint8_t tmp = getPHYCFGR();
phyconf->duplex = (tmp & PHYCFGR_DPX_FULL) ? PHY_DUPLEX_FULL : PHY_DUPLEX_HALF;
phyconf->speed = (tmp & PHYCFGR_SPD_100) ? PHY_SPEED_100 : PHY_SPEED_10;
}
int8_t wizphy_setphypmode(uint8_t pmode)
{
uint8_t tmp = 0;
tmp = getPHYCFGR();
if((tmp & PHYCFGR_OPMD)== 0) return -1;
tmp &= ~PHYCFGR_OPMDC_ALLA;
if( pmode == PHY_POWER_DOWN)
tmp |= PHYCFGR_OPMDC_PDOWN;
else
tmp |= PHYCFGR_OPMDC_ALLA;
setPHYCFGR(tmp);
wizphy_reset();
tmp = getPHYCFGR();
if( pmode == PHY_POWER_DOWN)
{
if(tmp & PHYCFGR_OPMDC_PDOWN) return 0;
}
else
{
if(tmp & PHYCFGR_OPMDC_ALLA) return 0;
}
return -1;
}
#endif
void wizchip_setnetinfo(wiz_NetInfo* pnetinfo)
{
setSHAR(pnetinfo->mac);
setGAR(pnetinfo->gw);
setSUBR(pnetinfo->sn);
setSIPR(pnetinfo->ip);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
_SUBN_[0] = pnetinfo->sn[0];
_SUBN_[1] = pnetinfo->sn[1];
_SUBN_[2] = pnetinfo->sn[2];
_SUBN_[3] = pnetinfo->sn[3];
#endif
_DNS_[0] = pnetinfo->dns[0];
_DNS_[1] = pnetinfo->dns[1];
_DNS_[2] = pnetinfo->dns[2];
_DNS_[3] = pnetinfo->dns[3];
_DHCP_ = pnetinfo->dhcp;
}
void wizchip_getnetinfo(wiz_NetInfo* pnetinfo)
{
getSHAR(pnetinfo->mac);
getGAR(pnetinfo->gw);
getSUBR(pnetinfo->sn);
getSIPR(pnetinfo->ip);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
pnetinfo->sn[0] = _SUBN_[0];
pnetinfo->sn[1] = _SUBN_[1];
pnetinfo->sn[2] = _SUBN_[2];
pnetinfo->sn[3] = _SUBN_[3];
#endif
pnetinfo->dns[0]= _DNS_[0];
pnetinfo->dns[1]= _DNS_[1];
pnetinfo->dns[2]= _DNS_[2];
pnetinfo->dns[3]= _DNS_[3];
pnetinfo->dhcp = _DHCP_;
}
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
uint8_t *wizchip_getsubn(void) {
return _SUBN_;
}
#endif
int8_t wizchip_setnetmode(netmode_type netmode)
{
uint8_t tmp = 0;
#if _WIZCHIP_ != 5500
if(netmode & ~(NM_WAKEONLAN | NM_PPPOE | NM_PINGBLOCK)) return -1;
#else
if(netmode & ~(NM_WAKEONLAN | NM_PPPOE | NM_PINGBLOCK | NM_FORCEARP)) return -1;
#endif
tmp = getMR();
tmp |= (uint8_t)netmode;
setMR(tmp);
return 0;
}
netmode_type wizchip_getnetmode(void)
{
return (netmode_type) getMR();
}
void wizchip_settimeout(wiz_NetTimeout* nettime)
{
setRCR(nettime->retry_cnt);
setRTR(nettime->time_100us);
}
void wizchip_gettimeout(wiz_NetTimeout* nettime)
{
nettime->retry_cnt = getRCR();
nettime->time_100us = getRTR();
}

554
drivers/wiznet5k/ethernet/wizchip_conf.h
Wyświetl plik

@ -1,554 +0,0 @@
//*****************************************************************************
//
//! \file wizchip_conf.h
//! \brief WIZCHIP Config Header File.
//! \version 1.0.0
//! \date 2013/10/21
//! \par Revision history
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
/**
* @defgroup extra_functions 2. WIZnet Extra Functions
*
* @brief These functions is optional function. It could be replaced at WIZCHIP I/O function because they were made by WIZCHIP I/O functions.
* @details There are functions of configuring WIZCHIP, network, interrupt, phy, network information and timer. \n
*
*/
#ifndef _WIZCHIP_CONF_H_
#define _WIZCHIP_CONF_H_
#include <stdint.h>
/**
* @brief Select WIZCHIP.
* @todo You should select one, \b 5100, \b 5200 ,\b 5500 or etc. \n\n
* ex> <code> #define \_WIZCHIP_ 5500 </code>
*/
#ifndef _WIZCHIP_
#define _WIZCHIP_ 5200 // 5100, 5200, 5500
#endif
#define _WIZCHIP_IO_MODE_NONE_ 0x0000
#define _WIZCHIP_IO_MODE_BUS_ 0x0100 /**< Bus interface mode */
#define _WIZCHIP_IO_MODE_SPI_ 0x0200 /**< SPI interface mode */
//#define _WIZCHIP_IO_MODE_IIC_ 0x0400
//#define _WIZCHIP_IO_MODE_SDIO_ 0x0800
// Add to
//
#define _WIZCHIP_IO_MODE_BUS_DIR_ (_WIZCHIP_IO_MODE_BUS_ + 1) /**< BUS interface mode for direct */
#define _WIZCHIP_IO_MODE_BUS_INDIR_ (_WIZCHIP_IO_MODE_BUS_ + 2) /**< BUS interface mode for indirect */
#define _WIZCHIP_IO_MODE_SPI_VDM_ (_WIZCHIP_IO_MODE_SPI_ + 1) /**< SPI interface mode for variable length data*/
#define _WIZCHIP_IO_MODE_SPI_FDM_ (_WIZCHIP_IO_MODE_SPI_ + 2) /**< SPI interface mode for fixed length data mode*/
#if (_WIZCHIP_ == 5100)
#define _WIZCHIP_ID_ "W5100\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ , @ref \_WIZCHIP_IO_MODE_BUS_DIR_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
*/
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_DIR_
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
#elif (_WIZCHIP_ == 5200)
#define _WIZCHIP_ID_ "W5200\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
*/
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
#include "w5200/w5200.h"
#elif (_WIZCHIP_ == 5500)
#define _WIZCHIP_ID_ "W5500\0"
/**
* @brief Define interface mode. \n
* @todo Should select interface mode as chip.
* - @ref \_WIZCHIP_IO_MODE_SPI_ \n
* -@ref \_WIZCHIP_IO_MODE_SPI_VDM_ : Valid only in @ref \_WIZCHIP_ == 5500 \n
* -@ref \_WIZCHIP_IO_MODE_SPI_FDM_ : Valid only in @ref \_WIZCHIP_ == 5500 \n
* - @ref \_WIZCHIP_IO_MODE_BUS_ \n
* - @ref \_WIZCHIP_IO_MODE_BUS_DIR_ \n
* - @ref \_WIZCHIP_IO_MODE_BUS_INDIR_ \n
* - Others will be defined in future. \n\n
* ex> <code> #define \_WIZCHIP_IO_MODE_ \_WIZCHIP_IO_MODE_SPI_VDM_ </code>
*
*/
//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_FDM_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_VDM_
#include "w5500/w5500.h"
#else
#error "Unknown defined _WIZCHIP_. You should define one of 5100, 5200, and 5500 !!!"
#endif
#ifndef _WIZCHIP_IO_MODE_
#error "Undefined _WIZCHIP_IO_MODE_. You should define it !!!"
#endif
/**
* @brief Define I/O base address when BUS IF mode.
* @todo Should re-define it to fit your system when BUS IF Mode (@ref \_WIZCHIP_IO_MODE_BUS_,
* @ref \_WIZCHIP_IO_MODE_BUS_DIR_, @ref \_WIZCHIP_IO_MODE_BUS_INDIR_). \n\n
* ex> <code> #define \_WIZCHIP_IO_BASE_ 0x00008000 </code>
*/
#define _WIZCHIP_IO_BASE_ 0x00000000 //
#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS
#ifndef _WIZCHIP_IO_BASE_
#error "You should be define _WIZCHIP_IO_BASE to fit your system memory map."
#endif
#endif
#if _WIZCHIP_ > 5100
#define _WIZCHIP_SOCK_NUM_ 8 ///< The count of independant socket of @b WIZCHIP
#else
#define _WIZCHIP_SOCK_NUM_ 4 ///< The count of independant socket of @b WIZCHIP
#endif
/********************************************************
* WIZCHIP BASIC IF functions for SPI, SDIO, I2C , ETC.
*********************************************************/
/**
* @ingroup DATA_TYPE
* @brief The set of callback functions for W5500:@ref WIZCHIP_IO_Functions W5200:@ref WIZCHIP_IO_Functions_W5200
*/
typedef struct __WIZCHIP
{
uint16_t if_mode; ///< host interface mode
uint8_t id[6]; ///< @b WIZCHIP ID such as @b 5100, @b 5200, @b 5500, and so on.
/**
* The set of critical section callback func.
*/
struct _CRIS
{
void (*_enter) (void); ///< crtical section enter
void (*_exit) (void); ///< critial section exit
}CRIS;
/**
* The set of @ref\_WIZCHIP_ select control callback func.
*/
struct _CS
{
void (*_select) (void); ///< @ref \_WIZCHIP_ selected
void (*_deselect)(void); ///< @ref \_WIZCHIP_ deselected
}CS;
/**
* The set of interface IO callback func.
*/
union _IF
{
/**
* For BUS interface IO
*/
struct
{
uint8_t (*_read_byte) (uint32_t AddrSel);
void (*_write_byte) (uint32_t AddrSel, uint8_t wb);
}BUS;
/**
* For SPI interface IO
*/
struct
{
void (*_read_bytes) (uint8_t *buf, uint32_t len);
void (*_write_bytes) (const uint8_t *buf, uint32_t len);
}SPI;
// To be added
//
}IF;
}_WIZCHIP;
extern _WIZCHIP WIZCHIP;
/**
* @ingroup DATA_TYPE
* WIZCHIP control type enumration used in @ref ctlwizchip().
*/
typedef enum
{
CW_RESET_WIZCHIP, ///< Resets WIZCHIP by softly
CW_INIT_WIZCHIP, ///< Inializes to WIZCHIP with SOCKET buffer size 2 or 1 dimension array typed uint8_t.
CW_GET_INTERRUPT, ///< Get Interrupt status of WIZCHIP
CW_CLR_INTERRUPT, ///< Clears interrupt
CW_SET_INTRMASK, ///< Masks interrupt
CW_GET_INTRMASK, ///< Get interrupt mask
CW_SET_INTRTIME, ///< Set interval time between the current and next interrupt.
CW_GET_INTRTIME, ///< Set interval time between the current and next interrupt.
CW_GET_ID, ///< Gets WIZCHIP name.
#if _WIZCHIP_ == 5500
CW_RESET_PHY, ///< Resets internal PHY. Valid Only W5000
CW_SET_PHYCONF, ///< When PHY configured by interal register, PHY operation mode (Manual/Auto, 10/100, Half/Full). Valid Only W5000
CW_GET_PHYCONF, ///< Get PHY operation mode in interal register. Valid Only W5000
CW_GET_PHYSTATUS, ///< Get real PHY status on operating. Valid Only W5000
CW_SET_PHYPOWMODE, ///< Set PHY power mode as noraml and down when PHYSTATUS.OPMD == 1. Valid Only W5000
#endif
CW_GET_PHYPOWMODE, ///< Get PHY Power mode as down or normal
CW_GET_PHYLINK ///< Get PHY Link status
}ctlwizchip_type;
/**
* @ingroup DATA_TYPE
* Network control type enumration used in @ref ctlnetwork().
*/
typedef enum
{
CN_SET_NETINFO, ///< Set Network with @ref wiz_NetInfo
CN_GET_NETINFO, ///< Get Network with @ref wiz_NetInfo
CN_SET_NETMODE, ///< Set network mode as WOL, PPPoE, Ping Block, and Force ARP mode
CN_GET_NETMODE, ///< Get network mode as WOL, PPPoE, Ping Block, and Force ARP mode
CN_SET_TIMEOUT, ///< Set network timeout as retry count and time.
CN_GET_TIMEOUT, ///< Get network timeout as retry count and time.
}ctlnetwork_type;
/**
* @ingroup DATA_TYPE
* Interrupt kind when CW_SET_INTRRUPT, CW_GET_INTERRUPT, CW_SET_INTRMASK
* and CW_GET_INTRMASK is used in @ref ctlnetwork().
* It can be used with OR operation.
*/
typedef enum
{
#if _WIZCHIP_ > 5200
IK_WOL = (1 << 4), ///< Wake On Lan by receiving the magic packet. Valid in W500.
#endif
IK_PPPOE_TERMINATED = (1 << 5), ///< PPPoE Disconnected
#if _WIZCHIP_ != 5200
IK_DEST_UNREACH = (1 << 6), ///< Destination IP & Port Unreable, No use in W5200
#endif
IK_IP_CONFLICT = (1 << 7), ///< IP conflict occurred
IK_SOCK_0 = (1 << 8), ///< Socket 0 interrupt
IK_SOCK_1 = (1 << 9), ///< Socket 1 interrupt
IK_SOCK_2 = (1 << 10), ///< Socket 2 interrupt
IK_SOCK_3 = (1 << 11), ///< Socket 3 interrupt
#if _WIZCHIP_ > 5100
IK_SOCK_4 = (1 << 12), ///< Socket 4 interrupt, No use in 5100
IK_SOCK_5 = (1 << 13), ///< Socket 5 interrupt, No use in 5100
IK_SOCK_6 = (1 << 14), ///< Socket 6 interrupt, No use in 5100
IK_SOCK_7 = (1 << 15), ///< Socket 7 interrupt, No use in 5100
#endif
#if _WIZCHIP_ > 5100
IK_SOCK_ALL = (0xFF << 8) ///< All Socket interrpt
#else
IK_SOCK_ALL = (0x0F << 8) ///< All Socket interrpt
#endif
}intr_kind;
#define PHY_CONFBY_HW 0 ///< Configured PHY operation mode by HW pin
#define PHY_CONFBY_SW 1 ///< Configured PHY operation mode by SW register
#define PHY_MODE_MANUAL 0 ///< Configured PHY operation mode with user setting.
#define PHY_MODE_AUTONEGO 1 ///< Configured PHY operation mode with auto-negotiation
#define PHY_SPEED_10 0 ///< Link Speed 10
#define PHY_SPEED_100 1 ///< Link Speed 100
#define PHY_DUPLEX_HALF 0 ///< Link Half-Duplex
#define PHY_DUPLEX_FULL 1 ///< Link Full-Duplex
#define PHY_LINK_OFF 0 ///< Link Off
#define PHY_LINK_ON 1 ///< Link On
#define PHY_POWER_NORM 0 ///< PHY power normal mode
#define PHY_POWER_DOWN 1 ///< PHY power down mode
#if _WIZCHIP_ == 5500
/**
* @ingroup DATA_TYPE
* It configures PHY configuration when CW_SET PHYCONF or CW_GET_PHYCONF in W5500,
* and it indicates the real PHY status configured by HW or SW in all WIZCHIP. \n
* Valid only in W5500.
*/
typedef struct wiz_PhyConf_t
{
uint8_t by; ///< set by @ref PHY_CONFBY_HW or @ref PHY_CONFBY_SW
uint8_t mode; ///< set by @ref PHY_MODE_MANUAL or @ref PHY_MODE_AUTONEGO
uint8_t speed; ///< set by @ref PHY_SPEED_10 or @ref PHY_SPEED_100
uint8_t duplex; ///< set by @ref PHY_DUPLEX_HALF @ref PHY_DUPLEX_FULL
//uint8_t power; ///< set by @ref PHY_POWER_NORM or @ref PHY_POWER_DOWN
//uint8_t link; ///< Valid only in CW_GET_PHYSTATUS. set by @ref PHY_LINK_ON or PHY_DUPLEX_OFF
}wiz_PhyConf;
#endif
/**
* @ingroup DATA_TYPE
* It used in setting dhcp_mode of @ref wiz_NetInfo.
*/
typedef enum
{
NETINFO_STATIC = 1, ///< Static IP configuration by manually.
NETINFO_DHCP ///< Dynamic IP configruation from a DHCP sever
}dhcp_mode;
/**
* @ingroup DATA_TYPE
* Network Information for WIZCHIP
*/
typedef struct wiz_NetInfo_t
{
uint8_t mac[6]; ///< Source Mac Address
uint8_t ip[4]; ///< Source IP Address
uint8_t sn[4]; ///< Subnet Mask
uint8_t gw[4]; ///< Gateway IP Address
uint8_t dns[4]; ///< DNS server IP Address
dhcp_mode dhcp; ///< 1 - Static, 2 - DHCP
}wiz_NetInfo;
/**
* @ingroup DATA_TYPE
* Network mode
*/
typedef enum
{
#if _WIZCHIP_ == 5500
NM_FORCEARP = (1<<1), ///< Force to APP send whenever udp data is sent. Valid only in W5500
#endif
NM_WAKEONLAN = (1<<5), ///< Wake On Lan
NM_PINGBLOCK = (1<<4), ///< Block ping-request
NM_PPPOE = (1<<3), ///< PPPoE mode
}netmode_type;
/**
* @ingroup DATA_TYPE
* Used in CN_SET_TIMEOUT or CN_GET_TIMEOUT of @ref ctlwizchip() for timeout configruation.
*/
typedef struct wiz_NetTimeout_t
{
uint8_t retry_cnt; ///< retry count
uint16_t time_100us; ///< time unit 100us
}wiz_NetTimeout;
/**
*@brief Registers call back function for critical section of I/O functions such as
*\ref WIZCHIP_READ, @ref WIZCHIP_WRITE, @ref WIZCHIP_READ_BUF and @ref WIZCHIP_WRITE_BUF.
*@param cris_en : callback function for critical section enter.
*@param cris_ex : callback function for critical section exit.
*@todo Describe @ref WIZCHIP_CRITICAL_ENTER and @ref WIZCHIP_CRITICAL_EXIT marco or register your functions.
*@note If you do not describe or register, default functions(@ref wizchip_cris_enter & @ref wizchip_cris_exit) is called.
*/
void reg_wizchip_cris_cbfunc(void(*cris_en)(void), void(*cris_ex)(void));
/**
*@brief Registers call back function for WIZCHIP select & deselect.
*@param cs_sel : callback function for WIZCHIP select
*@param cs_desel : callback fucntion for WIZCHIP deselect
*@todo Describe @ref wizchip_cs_select and @ref wizchip_cs_deselect function or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_cs_cbfunc(void(*cs_sel)(void), void(*cs_desel)(void));
/**
*@brief Registers call back function for bus interface.
*@param bus_rb : callback function to read byte data using system bus
*@param bus_wb : callback function to write byte data using system bus
*@todo Describe @ref wizchip_bus_readbyte and @ref wizchip_bus_writebyte function
*or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_bus_cbfunc(uint8_t (*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, uint8_t wb));
/**
*@brief Registers call back function for SPI interface.
*@param spi_rb : callback function to read byte usig SPI
*@param spi_wb : callback function to write byte usig SPI
*@todo Describe \ref wizchip_spi_readbyte and \ref wizchip_spi_writebyte function
*or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_spi_cbfunc(void (*spi_rb)(uint8_t *, uint32_t), void (*spi_wb)(const uint8_t *, uint32_t));
/**
* @ingroup extra_functions
* @brief Controls to the WIZCHIP.
* @details Resets WIZCHIP & internal PHY, Configures PHY mode, Monitor PHY(Link,Speed,Half/Full/Auto),
* controls interrupt & mask and so on.
* @param cwtype : Decides to the control type
* @param arg : arg type is dependent on cwtype.
* @return 0 : Success \n
* -1 : Fail because of invalid \ref ctlwizchip_type or unsupported \ref ctlwizchip_type in WIZCHIP
*/
int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg);
/**
* @ingroup extra_functions
* @brief Controls to network.
* @details Controls to network environment, mode, timeout and so on.
* @param cntype : Input. Decides to the control type
* @param arg : Inout. arg type is dependent on cntype.
* @return -1 : Fail because of invalid \ref ctlnetwork_type or unsupported \ref ctlnetwork_type in WIZCHIP \n
* 0 : Success
*/
int8_t ctlnetwork(ctlnetwork_type cntype, void* arg);
/*
* The following functions are implemented for internal use.
* but You can call these functions for code size reduction instead of ctlwizchip() and ctlnetwork().
*/
/**
* @ingroup extra_functions
* @brief Reset WIZCHIP by softly.
*/
void wizchip_sw_reset(void);
/**
* @ingroup extra_functions
* @brief Initializes WIZCHIP with socket buffer size
* @param txsize Socket tx buffer sizes. If null, initialized the default size 2KB.
* @param rxsize Socket rx buffer sizes. If null, initialized the default size 2KB.
* @return 0 : succcess \n
* -1 : fail. Invalid buffer size
*/
int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize);
/**
* @ingroup extra_functions
* @brief Clear Interrupt of WIZCHIP.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
void wizchip_clrinterrupt(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt of WIZCHIP.
* @return @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
intr_kind wizchip_getinterrupt(void);
/**
* @ingroup extra_functions
* @brief Mask or Unmask Interrupt of WIZCHIP.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
void wizchip_setinterruptmask(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt mask of WIZCHIP.
* @return : The operated OR vaule of @ref intr_kind. It can type-cast to uint16_t.
*/
intr_kind wizchip_getinterruptmask(void);
#if _WIZCHIP_ > 5100
int8_t wizphy_getphylink(void); ///< get the link status of phy in WIZCHIP. No use in W5100
int8_t wizphy_getphypmode(void); ///< get the power mode of PHY in WIZCHIP. No use in W5100
#endif
#if _WIZCHIP_ == 5500
void wizphy_reset(void); ///< Reset phy. Vailid only in W5500
/**
* @ingroup extra_functions
* @brief Set the phy information for WIZCHIP without power mode
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_setphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get phy configuration information.
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_getphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get phy status.
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_getphystat(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief set the power mode of phy inside WIZCHIP. Refer to @ref PHYCFGR in W5500, @ref PHYSTATUS in W5200
* @param pmode Settig value of power down mode.
*/
int8_t wizphy_setphypmode(uint8_t pmode);
#endif
/**
* @ingroup extra_functions
* @brief Set the network information for WIZCHIP
* @param pnetinfo : @ref wizNetInfo
*/
void wizchip_setnetinfo(wiz_NetInfo* pnetinfo);
/**
* @ingroup extra_functions
* @brief Get the network information for WIZCHIP
* @param pnetinfo : @ref wizNetInfo
*/
void wizchip_getnetinfo(wiz_NetInfo* pnetinfo);
#if _WIZCHIP_ == 5200 // for W5200 ARP errata
uint8_t *wizchip_getsubn(void);
#endif
/**
* @ingroup extra_functions
* @brief Set the network mode such WOL, PPPoE, Ping Block, and etc.
* @param pnetinfo Value of network mode. Refer to @ref netmode_type.
*/
int8_t wizchip_setnetmode(netmode_type netmode);
/**
* @ingroup extra_functions
* @brief Get the network mode such WOL, PPPoE, Ping Block, and etc.
* @return Value of network mode. Refer to @ref netmode_type.
*/
netmode_type wizchip_getnetmode(void);
/**
* @ingroup extra_functions
* @brief Set retry time value(@ref RTR) and retry count(@ref RCR).
* @details @ref RTR configures the retransmission timeout period and @ref RCR configures the number of time of retransmission.
* @param nettime @ref RTR value and @ref RCR value. Refer to @ref wiz_NetTimeout.
*/
void wizchip_settimeout(wiz_NetTimeout* nettime);
/**
* @ingroup extra_functions
* @brief Get retry time value(@ref RTR) and retry count(@ref RCR).
* @details @ref RTR configures the retransmission timeout period and @ref RCR configures the number of time of retransmission.
* @param nettime @ref RTR value and @ref RCR value. Refer to @ref wiz_NetTimeout.
*/
void wizchip_gettimeout(wiz_NetTimeout* nettime);
#endif // _WIZCHIP_CONF_H_

978
drivers/wiznet5k/internet/dhcp/dhcp.c
Wyświetl plik

@ -1,978 +0,0 @@
//*****************************************************************************
//
//! \file dhcp.c
//! \brief DHCP APIs implement file.
//! \details Processig DHCP protocol as DISCOVER, OFFER, REQUEST, ACK, NACK and DECLINE.
//! \version 1.1.0
//! \date 2013/11/18
//! \par Revision history
//! <2013/11/18> 1st Release
//! <2012/12/20> V1.1.0
//! 1. Optimize code
//! 2. Add reg_dhcp_cbfunc()
//! 3. Add DHCP_stop()
//! 4. Integrate check_DHCP_state() & DHCP_run() to DHCP_run()
//! 5. Don't care system endian
//! 6. Add comments
//! <2012/12/26> V1.1.1
//! 1. Modify variable declaration: dhcp_tick_1s is declared volatile for code optimization
//! \author Eric Jung & MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
//#include "Ethernet/socket.h"
//#include "Internet/DHCP/dhcp.h"
#include "../../Ethernet/socket.h"
#include "dhcp.h"
/* If you want to display debug & processing message, Define _DHCP_DEBUG_ in dhcp.h */
#ifdef _DHCP_DEBUG_
#include <stdio.h>
#endif
/* DHCP state machine. */
#define STATE_DHCP_INIT 0 ///< Initialize
#define STATE_DHCP_DISCOVER 1 ///< send DISCOVER and wait OFFER
#define STATE_DHCP_REQUEST 2 ///< send REQEUST and wait ACK or NACK
#define STATE_DHCP_LEASED 3 ///< ReceiveD ACK and IP leased
#define STATE_DHCP_REREQUEST 4 ///< send REQUEST for maintaining leased IP
#define STATE_DHCP_RELEASE 5 ///< No use
#define STATE_DHCP_STOP 6 ///< Stop processing DHCP
#define DHCP_FLAGSBROADCAST 0x8000 ///< The broadcast value of flags in @ref RIP_MSG
#define DHCP_FLAGSUNICAST 0x0000 ///< The unicast value of flags in @ref RIP_MSG
/* DHCP message OP code */
#define DHCP_BOOTREQUEST 1 ///< Request Message used in op of @ref RIP_MSG
#define DHCP_BOOTREPLY 2 ///< Reply Message used i op of @ref RIP_MSG
/* DHCP message type */
#define DHCP_DISCOVER 1 ///< DISCOVER message in OPT of @ref RIP_MSG
#define DHCP_OFFER 2 ///< OFFER message in OPT of @ref RIP_MSG
#define DHCP_REQUEST 3 ///< REQUEST message in OPT of @ref RIP_MSG
#define DHCP_DECLINE 4 ///< DECLINE message in OPT of @ref RIP_MSG
#define DHCP_ACK 5 ///< ACK message in OPT of @ref RIP_MSG
#define DHCP_NAK 6 ///< NACK message in OPT of @ref RIP_MSG
#define DHCP_RELEASE 7 ///< RELEASE message in OPT of @ref RIP_MSG. No use
#define DHCP_INFORM 8 ///< INFORM message in OPT of @ref RIP_MSG. No use
#define DHCP_HTYPE10MB 1 ///< Used in type of @ref RIP_MSG
#define DHCP_HTYPE100MB 2 ///< Used in type of @ref RIP_MSG
#define DHCP_HLENETHERNET 6 ///< Used in hlen of @ref RIP_MSG
#define DHCP_HOPS 0 ///< Used in hops of @ref RIP_MSG
#define DHCP_SECS 0 ///< Used in secs of @ref RIP_MSG
#define INFINITE_LEASETIME 0xffffffff ///< Infinite lease time
#define OPT_SIZE 312 /// Max OPT size of @ref RIP_MSG
#define RIP_MSG_SIZE (236+OPT_SIZE) /// Max size of @ref RIP_MSG
/*
* @brief DHCP option and value (cf. RFC1533)
*/
enum
{
padOption = 0,
subnetMask = 1,
timerOffset = 2,
routersOnSubnet = 3,
timeServer = 4,
nameServer = 5,
dns = 6,
logServer = 7,
cookieServer = 8,
lprServer = 9,
impressServer = 10,
resourceLocationServer = 11,
hostName = 12,
bootFileSize = 13,
meritDumpFile = 14,
domainName = 15,
swapServer = 16,
rootPath = 17,
extentionsPath = 18,
IPforwarding = 19,
nonLocalSourceRouting = 20,
policyFilter = 21,
maxDgramReasmSize = 22,
defaultIPTTL = 23,
pathMTUagingTimeout = 24,
pathMTUplateauTable = 25,
ifMTU = 26,
allSubnetsLocal = 27,
broadcastAddr = 28,
performMaskDiscovery = 29,
maskSupplier = 30,
performRouterDiscovery = 31,
routerSolicitationAddr = 32,
staticRoute = 33,
trailerEncapsulation = 34,
arpCacheTimeout = 35,
ethernetEncapsulation = 36,
tcpDefaultTTL = 37,
tcpKeepaliveInterval = 38,
tcpKeepaliveGarbage = 39,
nisDomainName = 40,
nisServers = 41,
ntpServers = 42,
vendorSpecificInfo = 43,
netBIOSnameServer = 44,
netBIOSdgramDistServer = 45,
netBIOSnodeType = 46,
netBIOSscope = 47,
xFontServer = 48,
xDisplayManager = 49,
dhcpRequestedIPaddr = 50,
dhcpIPaddrLeaseTime = 51,
dhcpOptionOverload = 52,
dhcpMessageType = 53,
dhcpServerIdentifier = 54,
dhcpParamRequest = 55,
dhcpMsg = 56,
dhcpMaxMsgSize = 57,
dhcpT1value = 58,
dhcpT2value = 59,
dhcpClassIdentifier = 60,
dhcpClientIdentifier = 61,
endOption = 255
};
/*
* @brief DHCP message format
*/
typedef struct {
uint8_t op; ///< @ref DHCP_BOOTREQUEST or @ref DHCP_BOOTREPLY
uint8_t htype; ///< @ref DHCP_HTYPE10MB or @ref DHCP_HTYPE100MB
uint8_t hlen; ///< @ref DHCP_HLENETHERNET
uint8_t hops; ///< @ref DHCP_HOPS
uint32_t xid; ///< @ref DHCP_XID This increase one every DHCP transaction.
uint16_t secs; ///< @ref DHCP_SECS
uint16_t flags; ///< @ref DHCP_FLAGSBROADCAST or @ref DHCP_FLAGSUNICAST
uint8_t ciaddr[4]; ///< @ref Request IP to DHCP sever
uint8_t yiaddr[4]; ///< @ref Offered IP from DHCP server
uint8_t siaddr[4]; ///< No use
uint8_t giaddr[4]; ///< No use
uint8_t chaddr[16]; ///< DHCP client 6bytes MAC address. Others is filled to zero
uint8_t sname[64]; ///< No use
uint8_t file[128]; ///< No use
uint8_t OPT[OPT_SIZE]; ///< Option
} RIP_MSG;
uint8_t DHCP_SOCKET; // Socket number for DHCP
uint8_t DHCP_SIP[4]; // DHCP Server IP address
// Network information from DHCP Server
uint8_t OLD_allocated_ip[4] = {0, }; // Previous IP address
uint8_t DHCP_allocated_ip[4] = {0, }; // IP address from DHCP
uint8_t DHCP_allocated_gw[4] = {0, }; // Gateway address from DHCP
uint8_t DHCP_allocated_sn[4] = {0, }; // Subnet mask from DHCP
uint8_t DHCP_allocated_dns[4] = {0, }; // DNS address from DHCP
int8_t dhcp_state = STATE_DHCP_INIT; // DHCP state
int8_t dhcp_retry_count = 0;
uint32_t dhcp_lease_time = INFINITE_LEASETIME;
volatile uint32_t dhcp_tick_1s = 0; // unit 1 second
uint32_t dhcp_tick_next = DHCP_WAIT_TIME ;
uint32_t DHCP_XID; // Any number
RIP_MSG* pDHCPMSG; // Buffer pointer for DHCP processing
uint8_t HOST_NAME[] = DCHP_HOST_NAME;
uint8_t DHCP_CHADDR[6]; // DHCP Client MAC address.
/* The default callback function */
void default_ip_assign(void);
void default_ip_update(void);
void default_ip_conflict(void);
/* Callback handler */
void (*dhcp_ip_assign)(void) = default_ip_assign; /* handler to be called when the IP address from DHCP server is first assigned */
void (*dhcp_ip_update)(void) = default_ip_update; /* handler to be called when the IP address from DHCP server is updated */
void (*dhcp_ip_conflict)(void) = default_ip_conflict; /* handler to be called when the IP address from DHCP server is conflict */
void reg_dhcp_cbfunc(void(*ip_assign)(void), void(*ip_update)(void), void(*ip_conflict)(void));
/* send DISCOVER message to DHCP server */
void send_DHCP_DISCOVER(void);
/* send REQEUST message to DHCP server */
void send_DHCP_REQUEST(void);
/* send DECLINE message to DHCP server */
void send_DHCP_DECLINE(void);
/* IP conflict check by sending ARP-request to leased IP and wait ARP-response. */
int8_t check_DHCP_leasedIP(void);
/* check the timeout in DHCP process */
uint8_t check_DHCP_timeout(void);
/* Intialize to timeout process. */
void reset_DHCP_timeout(void);
/* Parse message as OFFER and ACK and NACK from DHCP server.*/
int8_t parseDHCPCMSG(void);
/* The default handler of ip assign first */
void default_ip_assign(void)
{
setSIPR(DHCP_allocated_ip);
setSUBR(DHCP_allocated_sn);
setGAR (DHCP_allocated_gw);
}
/* The default handler of ip changed */
void default_ip_update(void)
{
/* WIZchip Software Reset */
setMR(MR_RST);
getMR(); // for delay
default_ip_assign();
setSHAR(DHCP_CHADDR);
}
/* The default handler of ip changed */
void default_ip_conflict(void)
{
// WIZchip Software Reset
setMR(MR_RST);
getMR(); // for delay
setSHAR(DHCP_CHADDR);
}
/* register the call back func. */
void reg_dhcp_cbfunc(void(*ip_assign)(void), void(*ip_update)(void), void(*ip_conflict)(void))
{
dhcp_ip_assign = default_ip_assign;
dhcp_ip_update = default_ip_update;
dhcp_ip_conflict = default_ip_conflict;
if(ip_assign) dhcp_ip_assign = ip_assign;
if(ip_update) dhcp_ip_update = ip_update;
if(ip_conflict) dhcp_ip_conflict = ip_conflict;
}
/* make the common DHCP message */
void makeDHCPMSG(void)
{
uint8_t bk_mac[6];
uint8_t* ptmp;
uint8_t i;
getSHAR(bk_mac);
pDHCPMSG->op = DHCP_BOOTREQUEST;
pDHCPMSG->htype = DHCP_HTYPE10MB;
pDHCPMSG->hlen = DHCP_HLENETHERNET;
pDHCPMSG->hops = DHCP_HOPS;
ptmp = (uint8_t*)(&pDHCPMSG->xid);
*(ptmp+0) = (uint8_t)((DHCP_XID & 0xFF000000) >> 24);
*(ptmp+1) = (uint8_t)((DHCP_XID & 0x00FF0000) >> 16);
*(ptmp+2) = (uint8_t)((DHCP_XID & 0x0000FF00) >> 8);
*(ptmp+3) = (uint8_t)((DHCP_XID & 0x000000FF) >> 0);
pDHCPMSG->secs = DHCP_SECS;
ptmp = (uint8_t*)(&pDHCPMSG->flags);
*(ptmp+0) = (uint8_t)((DHCP_FLAGSBROADCAST & 0xFF00) >> 8);
*(ptmp+1) = (uint8_t)((DHCP_FLAGSBROADCAST & 0x00FF) >> 0);
pDHCPMSG->ciaddr[0] = 0;
pDHCPMSG->ciaddr[1] = 0;
pDHCPMSG->ciaddr[2] = 0;
pDHCPMSG->ciaddr[3] = 0;
pDHCPMSG->yiaddr[0] = 0;
pDHCPMSG->yiaddr[1] = 0;
pDHCPMSG->yiaddr[2] = 0;
pDHCPMSG->yiaddr[3] = 0;
pDHCPMSG->siaddr[0] = 0;
pDHCPMSG->siaddr[1] = 0;
pDHCPMSG->siaddr[2] = 0;
pDHCPMSG->siaddr[3] = 0;
pDHCPMSG->giaddr[0] = 0;
pDHCPMSG->giaddr[1] = 0;
pDHCPMSG->giaddr[2] = 0;
pDHCPMSG->giaddr[3] = 0;
pDHCPMSG->chaddr[0] = DHCP_CHADDR[0];
pDHCPMSG->chaddr[1] = DHCP_CHADDR[1];
pDHCPMSG->chaddr[2] = DHCP_CHADDR[2];
pDHCPMSG->chaddr[3] = DHCP_CHADDR[3];
pDHCPMSG->chaddr[4] = DHCP_CHADDR[4];
pDHCPMSG->chaddr[5] = DHCP_CHADDR[5];
for (i = 6; i < 16; i++) pDHCPMSG->chaddr[i] = 0;
for (i = 0; i < 64; i++) pDHCPMSG->sname[i] = 0;
for (i = 0; i < 128; i++) pDHCPMSG->file[i] = 0;
// MAGIC_COOKIE
pDHCPMSG->OPT[0] = (uint8_t)((MAGIC_COOKIE & 0xFF000000) >> 24);
pDHCPMSG->OPT[1] = (uint8_t)((MAGIC_COOKIE & 0x00FF0000) >> 16);
pDHCPMSG->OPT[2] = (uint8_t)((MAGIC_COOKIE & 0x0000FF00) >> 8);
pDHCPMSG->OPT[3] = (uint8_t) (MAGIC_COOKIE & 0x000000FF) >> 0;
}
/* SEND DHCP DISCOVER */
void send_DHCP_DISCOVER(void)
{
uint16_t i;
uint8_t ip[4];
uint16_t k = 0;
makeDHCPMSG();
k = 4; // because MAGIC_COOKIE already made by makeDHCPMSG()
// Option Request Param
pDHCPMSG->OPT[k++] = dhcpMessageType;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_DISCOVER;
// Client identifier
pDHCPMSG->OPT[k++] = dhcpClientIdentifier;
pDHCPMSG->OPT[k++] = 0x07;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_CHADDR[0];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[1];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[2];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[3];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[4];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[5];
// host name
pDHCPMSG->OPT[k++] = hostName;
pDHCPMSG->OPT[k++] = 0; // fill zero length of hostname
for(i = 0 ; HOST_NAME[i] != 0; i++)
pDHCPMSG->OPT[k++] = HOST_NAME[i];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[3];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[4];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[5];
pDHCPMSG->OPT[k - (i+3+1)] = i+3; // length of hostname
pDHCPMSG->OPT[k++] = dhcpParamRequest;
pDHCPMSG->OPT[k++] = 0x06; // length of request
pDHCPMSG->OPT[k++] = subnetMask;
pDHCPMSG->OPT[k++] = routersOnSubnet;
pDHCPMSG->OPT[k++] = dns;
pDHCPMSG->OPT[k++] = domainName;
pDHCPMSG->OPT[k++] = dhcpT1value;
pDHCPMSG->OPT[k++] = dhcpT2value;
pDHCPMSG->OPT[k++] = endOption;
for (i = k; i < OPT_SIZE; i++) pDHCPMSG->OPT[i] = 0;
// send broadcasting packet
ip[0] = 255;
ip[1] = 255;
ip[2] = 255;
ip[3] = 255;
#ifdef _DHCP_DEBUG_
printf("> Send DHCP_DISCOVER\r\n");
#endif
sendto(DHCP_SOCKET, (uint8_t *)pDHCPMSG, RIP_MSG_SIZE, ip, DHCP_SERVER_PORT);
}
/* SEND DHCP REQUEST */
void send_DHCP_REQUEST(void)
{
int i;
uint8_t ip[4];
uint16_t k = 0;
makeDHCPMSG();
if(dhcp_state == STATE_DHCP_LEASED || dhcp_state == STATE_DHCP_REREQUEST)
{
*((uint8_t*)(&pDHCPMSG->flags)) = ((DHCP_FLAGSUNICAST & 0xFF00)>> 8);
*((uint8_t*)(&pDHCPMSG->flags)+1) = (DHCP_FLAGSUNICAST & 0x00FF);
pDHCPMSG->ciaddr[0] = DHCP_allocated_ip[0];
pDHCPMSG->ciaddr[1] = DHCP_allocated_ip[1];
pDHCPMSG->ciaddr[2] = DHCP_allocated_ip[2];
pDHCPMSG->ciaddr[3] = DHCP_allocated_ip[3];
ip[0] = DHCP_SIP[0];
ip[1] = DHCP_SIP[1];
ip[2] = DHCP_SIP[2];
ip[3] = DHCP_SIP[3];
}
else
{
ip[0] = 255;
ip[1] = 255;
ip[2] = 255;
ip[3] = 255;
}
k = 4; // because MAGIC_COOKIE already made by makeDHCPMSG()
// Option Request Param.
pDHCPMSG->OPT[k++] = dhcpMessageType;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_REQUEST;
pDHCPMSG->OPT[k++] = dhcpClientIdentifier;
pDHCPMSG->OPT[k++] = 0x07;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_CHADDR[0];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[1];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[2];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[3];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[4];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[5];
if(ip[3] == 255) // if(dchp_state == STATE_DHCP_LEASED || dchp_state == DHCP_REREQUEST_STATE)
{
pDHCPMSG->OPT[k++] = dhcpRequestedIPaddr;
pDHCPMSG->OPT[k++] = 0x04;
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[0];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[1];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[2];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[3];
pDHCPMSG->OPT[k++] = dhcpServerIdentifier;
pDHCPMSG->OPT[k++] = 0x04;
pDHCPMSG->OPT[k++] = DHCP_SIP[0];
pDHCPMSG->OPT[k++] = DHCP_SIP[1];
pDHCPMSG->OPT[k++] = DHCP_SIP[2];
pDHCPMSG->OPT[k++] = DHCP_SIP[3];
}
// host name
pDHCPMSG->OPT[k++] = hostName;
pDHCPMSG->OPT[k++] = 0; // length of hostname
for(i = 0 ; HOST_NAME[i] != 0; i++)
pDHCPMSG->OPT[k++] = HOST_NAME[i];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[3];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[4];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[5];
pDHCPMSG->OPT[k - (i+3+1)] = i+3; // length of hostname
pDHCPMSG->OPT[k++] = dhcpParamRequest;
pDHCPMSG->OPT[k++] = 0x08;
pDHCPMSG->OPT[k++] = subnetMask;
pDHCPMSG->OPT[k++] = routersOnSubnet;
pDHCPMSG->OPT[k++] = dns;
pDHCPMSG->OPT[k++] = domainName;
pDHCPMSG->OPT[k++] = dhcpT1value;
pDHCPMSG->OPT[k++] = dhcpT2value;
pDHCPMSG->OPT[k++] = performRouterDiscovery;
pDHCPMSG->OPT[k++] = staticRoute;
pDHCPMSG->OPT[k++] = endOption;
for (i = k; i < OPT_SIZE; i++) pDHCPMSG->OPT[i] = 0;
#ifdef _DHCP_DEBUG_
printf("> Send DHCP_REQUEST\r\n");
#endif
sendto(DHCP_SOCKET, (uint8_t *)pDHCPMSG, RIP_MSG_SIZE, ip, DHCP_SERVER_PORT);
}
/* SEND DHCP DHCPDECLINE */
void send_DHCP_DECLINE(void)
{
int i;
uint8_t ip[4];
uint16_t k = 0;
makeDHCPMSG();
k = 4; // because MAGIC_COOKIE already made by makeDHCPMSG()
*((uint8_t*)(&pDHCPMSG->flags)) = ((DHCP_FLAGSUNICAST & 0xFF00)>> 8);
*((uint8_t*)(&pDHCPMSG->flags)+1) = (DHCP_FLAGSUNICAST & 0x00FF);
// Option Request Param.
pDHCPMSG->OPT[k++] = dhcpMessageType;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_DECLINE;
pDHCPMSG->OPT[k++] = dhcpClientIdentifier;
pDHCPMSG->OPT[k++] = 0x07;
pDHCPMSG->OPT[k++] = 0x01;
pDHCPMSG->OPT[k++] = DHCP_CHADDR[0];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[1];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[2];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[3];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[4];
pDHCPMSG->OPT[k++] = DHCP_CHADDR[5];
pDHCPMSG->OPT[k++] = dhcpRequestedIPaddr;
pDHCPMSG->OPT[k++] = 0x04;
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[0];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[1];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[2];
pDHCPMSG->OPT[k++] = DHCP_allocated_ip[3];
pDHCPMSG->OPT[k++] = dhcpServerIdentifier;
pDHCPMSG->OPT[k++] = 0x04;
pDHCPMSG->OPT[k++] = DHCP_SIP[0];
pDHCPMSG->OPT[k++] = DHCP_SIP[1];
pDHCPMSG->OPT[k++] = DHCP_SIP[2];
pDHCPMSG->OPT[k++] = DHCP_SIP[3];
pDHCPMSG->OPT[k++] = endOption;
for (i = k; i < OPT_SIZE; i++) pDHCPMSG->OPT[i] = 0;
//send broadcasting packet
ip[0] = 0xFF;
ip[1] = 0xFF;
ip[2] = 0xFF;
ip[3] = 0xFF;
#ifdef _DHCP_DEBUG_
printf("\r\n> Send DHCP_DECLINE\r\n");
#endif
sendto(DHCP_SOCKET, (uint8_t *)pDHCPMSG, RIP_MSG_SIZE, ip, DHCP_SERVER_PORT);
}
/* PARSE REPLY pDHCPMSG */
int8_t parseDHCPMSG(void)
{
uint8_t svr_addr[6];
uint16_t svr_port;
uint16_t len;
uint8_t * p;
uint8_t * e;
uint8_t type;
uint8_t opt_len;
if((len = getSn_RX_RSR(DHCP_SOCKET)) > 0)
{
len = recvfrom(DHCP_SOCKET, (uint8_t *)pDHCPMSG, len, svr_addr, &svr_port);
#ifdef _DHCP_DEBUG_
printf("DHCP message : %d.%d.%d.%d(%d) %d received. \r\n",svr_addr[0],svr_addr[1],svr_addr[2], svr_addr[3],svr_port, len);
#endif
}
else return 0;
if (svr_port == DHCP_SERVER_PORT) {
// compare mac address
if ( (pDHCPMSG->chaddr[0] != DHCP_CHADDR[0]) || (pDHCPMSG->chaddr[1] != DHCP_CHADDR[1]) ||
(pDHCPMSG->chaddr[2] != DHCP_CHADDR[2]) || (pDHCPMSG->chaddr[3] != DHCP_CHADDR[3]) ||
(pDHCPMSG->chaddr[4] != DHCP_CHADDR[4]) || (pDHCPMSG->chaddr[5] != DHCP_CHADDR[5]) )
return 0;
type = 0;
p = (uint8_t *)(&pDHCPMSG->op);
p = p + 240; // 240 = sizeof(RIP_MSG) + MAGIC_COOKIE size in RIP_MSG.opt - sizeof(RIP_MSG.opt)
e = p + (len - 240);
while ( p < e ) {
switch ( *p ) {
case endOption :
p = e; // for break while(p < e)
break;
case padOption :
p++;
break;
case dhcpMessageType :
p++;
p++;
type = *p++;
break;
case subnetMask :
p++;
p++;
DHCP_allocated_sn[0] = *p++;
DHCP_allocated_sn[1] = *p++;
DHCP_allocated_sn[2] = *p++;
DHCP_allocated_sn[3] = *p++;
break;
case routersOnSubnet :
p++;
opt_len = *p++;
DHCP_allocated_gw[0] = *p++;
DHCP_allocated_gw[1] = *p++;
DHCP_allocated_gw[2] = *p++;
DHCP_allocated_gw[3] = *p++;
p = p + (opt_len - 4);
break;
case dns :
p++;
opt_len = *p++;
DHCP_allocated_dns[0] = *p++;
DHCP_allocated_dns[1] = *p++;
DHCP_allocated_dns[2] = *p++;
DHCP_allocated_dns[3] = *p++;
p = p + (opt_len - 4);
break;
case dhcpIPaddrLeaseTime :
p++;
opt_len = *p++;
dhcp_lease_time = *p++;
dhcp_lease_time = (dhcp_lease_time << 8) + *p++;
dhcp_lease_time = (dhcp_lease_time << 8) + *p++;
dhcp_lease_time = (dhcp_lease_time << 8) + *p++;
#ifdef _DHCP_DEBUG_
dhcp_lease_time = 10;
#endif
break;
case dhcpServerIdentifier :
p++;
opt_len = *p++;
DHCP_SIP[0] = *p++;
DHCP_SIP[1] = *p++;
DHCP_SIP[2] = *p++;
DHCP_SIP[3] = *p++;
break;
default :
p++;
opt_len = *p++;
p += opt_len;
break;
} // switch
} // while
} // if
return type;
}
uint8_t DHCP_run(void)
{
uint8_t type;
uint8_t ret;
if(dhcp_state == STATE_DHCP_STOP) return DHCP_STOPPED;
if(getSn_SR(DHCP_SOCKET) != SOCK_UDP)
socket(DHCP_SOCKET, Sn_MR_UDP, DHCP_CLIENT_PORT, 0x00);
ret = DHCP_RUNNING;
type = parseDHCPMSG();
switch ( dhcp_state ) {
case STATE_DHCP_INIT :
DHCP_allocated_ip[0] = 0;
DHCP_allocated_ip[1] = 0;
DHCP_allocated_ip[2] = 0;
DHCP_allocated_ip[3] = 0;
send_DHCP_DISCOVER();
dhcp_state = STATE_DHCP_DISCOVER;
break;
case STATE_DHCP_DISCOVER :
if (type == DHCP_OFFER){
#ifdef _DHCP_DEBUG_
printf("> Receive DHCP_OFFER\r\n");
#endif
DHCP_allocated_ip[0] = pDHCPMSG->yiaddr[0];
DHCP_allocated_ip[1] = pDHCPMSG->yiaddr[1];
DHCP_allocated_ip[2] = pDHCPMSG->yiaddr[2];
DHCP_allocated_ip[3] = pDHCPMSG->yiaddr[3];
send_DHCP_REQUEST();
dhcp_state = STATE_DHCP_REQUEST;
} else ret = check_DHCP_timeout();
break;
case STATE_DHCP_REQUEST :
if (type == DHCP_ACK) {
#ifdef _DHCP_DEBUG_
printf("> Receive DHCP_ACK\r\n");
#endif
if (check_DHCP_leasedIP()) {
// Network info assignment from DHCP
dhcp_ip_assign();
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_LEASED;
} else {
// IP address conflict occurred
reset_DHCP_timeout();
dhcp_ip_conflict();
dhcp_state = STATE_DHCP_INIT;
}
} else if (type == DHCP_NAK) {
#ifdef _DHCP_DEBUG_
printf("> Receive DHCP_NACK\r\n");
#endif
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_DISCOVER;
} else ret = check_DHCP_timeout();
break;
case STATE_DHCP_LEASED :
ret = DHCP_IP_LEASED;
if ((dhcp_lease_time != INFINITE_LEASETIME) && ((dhcp_lease_time/2) < dhcp_tick_1s)) {
#ifdef _DHCP_DEBUG_
printf("> Maintains the IP address \r\n");
#endif
type = 0;
OLD_allocated_ip[0] = DHCP_allocated_ip[0];
OLD_allocated_ip[1] = DHCP_allocated_ip[1];
OLD_allocated_ip[2] = DHCP_allocated_ip[2];
OLD_allocated_ip[3] = DHCP_allocated_ip[3];
DHCP_XID++;
send_DHCP_REQUEST();
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_REREQUEST;
}
break;
case STATE_DHCP_REREQUEST :
ret = DHCP_IP_LEASED;
if (type == DHCP_ACK) {
dhcp_retry_count = 0;
if (OLD_allocated_ip[0] != DHCP_allocated_ip[0] ||
OLD_allocated_ip[1] != DHCP_allocated_ip[1] ||
OLD_allocated_ip[2] != DHCP_allocated_ip[2] ||
OLD_allocated_ip[3] != DHCP_allocated_ip[3])
{
ret = DHCP_IP_CHANGED;
dhcp_ip_update();
#ifdef _DHCP_DEBUG_
printf(">IP changed.\r\n");
#endif
}
#ifdef _DHCP_DEBUG_
else printf(">IP is continued.\r\n");
#endif
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_LEASED;
} else if (type == DHCP_NAK) {
#ifdef _DHCP_DEBUG_
printf("> Receive DHCP_NACK, Failed to maintain ip\r\n");
#endif
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_DISCOVER;
} else ret = check_DHCP_timeout();
break;
default :
break;
}
return ret;
}
void DHCP_stop(void)
{
close(DHCP_SOCKET);
dhcp_state = STATE_DHCP_STOP;
}
uint8_t check_DHCP_timeout(void)
{
uint8_t ret = DHCP_RUNNING;
if (dhcp_retry_count < MAX_DHCP_RETRY) {
if (dhcp_tick_next < dhcp_tick_1s) {
switch ( dhcp_state ) {
case STATE_DHCP_DISCOVER :
// printf("<<timeout>> state : STATE_DHCP_DISCOVER\r\n");
send_DHCP_DISCOVER();
break;
case STATE_DHCP_REQUEST :
// printf("<<timeout>> state : STATE_DHCP_REQUEST\r\n");
send_DHCP_REQUEST();
break;
case STATE_DHCP_REREQUEST :
// printf("<<timeout>> state : STATE_DHCP_REREQUEST\r\n");
send_DHCP_REQUEST();
break;
default :
break;
}
dhcp_tick_1s = 0;
dhcp_tick_next = dhcp_tick_1s + DHCP_WAIT_TIME;
dhcp_retry_count++;
}
} else { // timeout occurred
switch(dhcp_state) {
case STATE_DHCP_DISCOVER:
dhcp_state = STATE_DHCP_INIT;
ret = DHCP_FAILED;
break;
case STATE_DHCP_REQUEST:
case STATE_DHCP_REREQUEST:
send_DHCP_DISCOVER();
dhcp_state = STATE_DHCP_DISCOVER;
break;
default :
break;
}
reset_DHCP_timeout();
}
return ret;
}
int8_t check_DHCP_leasedIP(void)
{
uint8_t tmp;
int32_t ret;
//WIZchip RCR value changed for ARP Timeout count control
tmp = getRCR();
setRCR(0x03);
// IP conflict detection : ARP request - ARP reply
// Broadcasting ARP Request for check the IP conflict using UDP sendto() function
ret = sendto(DHCP_SOCKET, (uint8_t *)"CHECK_IP_CONFLICT", 17, DHCP_allocated_ip, 5000);
// RCR value restore
setRCR(tmp);
if(ret == SOCKERR_TIMEOUT) {
// UDP send Timeout occurred : allocated IP address is unique, DHCP Success
#ifdef _DHCP_DEBUG_
printf("\r\n> Check leased IP - OK\r\n");
#endif
return 1;
} else {
// Received ARP reply or etc : IP address conflict occur, DHCP Failed
send_DHCP_DECLINE();
ret = dhcp_tick_1s;
while((dhcp_tick_1s - ret) < 2) ; // wait for 1s over; wait to complete to send DECLINE message;
return 0;
}
}
void DHCP_init(uint8_t s, uint8_t * buf)
{
uint8_t zeroip[4] = {0,0,0,0};
getSHAR(DHCP_CHADDR);
if((DHCP_CHADDR[0] | DHCP_CHADDR[1] | DHCP_CHADDR[2] | DHCP_CHADDR[3] | DHCP_CHADDR[4] | DHCP_CHADDR[5]) == 0x00)
{
// assign temporary mac address, you should be set SHAR before call this function.
DHCP_CHADDR[0] = 0x00;
DHCP_CHADDR[1] = 0x08;
DHCP_CHADDR[2] = 0xdc;
DHCP_CHADDR[3] = 0x00;
DHCP_CHADDR[4] = 0x00;
DHCP_CHADDR[5] = 0x00;
setSHAR(DHCP_CHADDR);
}
DHCP_SOCKET = s; // SOCK_DHCP
pDHCPMSG = (RIP_MSG*)buf;
DHCP_XID = 0x12345678;
// WIZchip Netinfo Clear
setSIPR(zeroip);
setSIPR(zeroip);
setGAR(zeroip);
reset_DHCP_timeout();
dhcp_state = STATE_DHCP_INIT;
}
/* Rset the DHCP timeout count and retry count. */
void reset_DHCP_timeout(void)
{
dhcp_tick_1s = 0;
dhcp_tick_next = DHCP_WAIT_TIME;
dhcp_retry_count = 0;
}
void DHCP_time_handler(void)
{
dhcp_tick_1s++;
}
void getIPfromDHCP(uint8_t* ip)
{
ip[0] = DHCP_allocated_ip[0];
ip[1] = DHCP_allocated_ip[1];
ip[2] = DHCP_allocated_ip[2];
ip[3] = DHCP_allocated_ip[3];
}
void getGWfromDHCP(uint8_t* ip)
{
ip[0] =DHCP_allocated_gw[0];
ip[1] =DHCP_allocated_gw[1];
ip[2] =DHCP_allocated_gw[2];
ip[3] =DHCP_allocated_gw[3];
}
void getSNfromDHCP(uint8_t* ip)
{
ip[0] = DHCP_allocated_sn[0];
ip[1] = DHCP_allocated_sn[1];
ip[2] = DHCP_allocated_sn[2];
ip[3] = DHCP_allocated_sn[3];
}
void getDNSfromDHCP(uint8_t* ip)
{
ip[0] = DHCP_allocated_dns[0];
ip[1] = DHCP_allocated_dns[1];
ip[2] = DHCP_allocated_dns[2];
ip[3] = DHCP_allocated_dns[3];
}
uint32_t getDHCPLeasetime(void)
{
return dhcp_lease_time;
}

150
drivers/wiznet5k/internet/dhcp/dhcp.h
Wyświetl plik

@ -1,150 +0,0 @@
//*****************************************************************************
//
//! \file dhcp.h
//! \brief DHCP APIs Header file.
//! \details Processig DHCP protocol as DISCOVER, OFFER, REQUEST, ACK, NACK and DECLINE.
//! \version 1.1.0
//! \date 2013/11/18
//! \par Revision history
//! <2013/11/18> 1st Release
//! <2012/12/20> V1.1.0
//! 1. Move unreferenced DEFINE to dhcp.c
//! <2012/12/26> V1.1.1
//! \author Eric Jung & MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef _DHCP_H_
#define _DHCP_H_
/*
* @brief
* @details If you want to display debug & processing message, Define _DHCP_DEBUG_
* @note If defined, it depends on <stdio.h>
*/
//#define _DHCP_DEBUG_
/* Retry to processing DHCP */
#define MAX_DHCP_RETRY 2 ///< Maximum retry count
#define DHCP_WAIT_TIME 10 ///< Wait Time 10s
/* UDP port numbers for DHCP */
#define DHCP_SERVER_PORT 67 ///< DHCP server port number
#define DHCP_CLIENT_PORT 68 ///< DHCP client port number
#define MAGIC_COOKIE 0x63825363 ///< Any number. You can be modified it any number
#define DCHP_HOST_NAME "WIZnet\0"
/*
* @brief return value of @ref DHCP_run()
*/
enum
{
DHCP_FAILED = 0, ///< Processing Fail
DHCP_RUNNING, ///< Processing DHCP protocol
DHCP_IP_ASSIGN, ///< First Occupy IP from DHPC server (if cbfunc == null, act as default default_ip_assign)
DHCP_IP_CHANGED, ///< Change IP address by new IP address from DHCP (if cbfunc == null, act as default default_ip_update)
DHCP_IP_LEASED, ///< Stand by
DHCP_STOPPED ///< Stop processing DHCP protocol
};
/*
* @brief DHCP client initialization (outside of the main loop)
* @param s - socket number
* @param buf - buffer for processing DHCP message
*/
void DHCP_init(uint8_t s, uint8_t * buf);
/*
* @brief DHCP 1s Tick Timer handler
* @note SHOULD BE register to your system 1s Tick timer handler
*/
void DHCP_time_handler(void);
/*
* @brief Register call back function
* @param ip_assign - callback func when IP is assigned from DHCP server first
* @param ip_update - callback func when IP is changed
* @prarm ip_conflict - callback func when the assigned IP is conflict with others.
*/
void reg_dhcp_cbfunc(void(*ip_assign)(void), void(*ip_update)(void), void(*ip_conflict)(void));
/*
* @brief DHCP client in the main loop
* @return The value is as the follow \n
* @ref DHCP_FAILED \n
* @ref DHCP_RUNNING \n
* @ref DHCP_IP_ASSIGN \n
* @ref DHCP_IP_CHANGED \n
* @ref DHCP_IP_LEASED \n
* @ref DHCP_STOPPED \n
*
* @note This function is always called by you main task.
*/
uint8_t DHCP_run(void);
/*
* @brief Stop DHCP processing
* @note If you want to restart. call DHCP_init() and DHCP_run()
*/
void DHCP_stop(void);
/* Get Network information assigned from DHCP server */
/*
* @brief Get IP address
* @param ip - IP address to be returned
*/
void getIPfromDHCP(uint8_t* ip);
/*
* @brief Get Gateway address
* @param ip - Gateway address to be returned
*/
void getGWfromDHCP(uint8_t* ip);
/*
* @brief Get Subnet mask value
* @param ip - Subnet mask to be returned
*/
void getSNfromDHCP(uint8_t* ip);
/*
* @brief Get DNS address
* @param ip - DNS address to be returned
*/
void getDNSfromDHCP(uint8_t* ip);
/*
* @brief Get the leased time by DHCP sever
* @return unit 1s
*/
uint32_t getDHCPLeasetime(void);
#endif /* _DHCP_H_ */

566
drivers/wiznet5k/internet/dns/dns.c
Wyświetl plik

@ -1,566 +0,0 @@
//*****************************************************************************
//
//! \file dns.c
//! \brief DNS APIs Implement file.
//! \details Send DNS query & Receive DNS reponse. \n
//! It depends on stdlib.h & string.h in ansi-c library
//! \version 1.1.0
//! \date 2013/11/18
//! \par Revision history
//! <2013/10/21> 1st Release
//! <2013/12/20> V1.1.0
//! 1. Remove secondary DNS server in DNS_run
//! If 1st DNS_run failed, call DNS_run with 2nd DNS again
//! 2. DNS_timerHandler -> DNS_time_handler
//! 3. Remove the unused define
//! 4. Integrated dns.h dns.c & dns_parse.h dns_parse.c into dns.h & dns.c
//! <2013/12/20> V1.1.0
//!
//! \author Eric Jung & MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#include <string.h>
#include <stdlib.h>
//#include "Ethernet/socket.h"
//#include "Internet/DNS/dns.h"
#include "../../ethernet/socket.h"
#include "dns.h"
#ifdef _DNS_DEBUG_
#include <stdio.h>
#endif
#define INITRTT 2000L /* Initial smoothed response time */
#define MAXCNAME (MAX_DOMAIN_NAME + (MAX_DOMAIN_NAME>>1)) /* Maximum amount of cname recursion */
#define TYPE_A 1 /* Host address */
#define TYPE_NS 2 /* Name server */
#define TYPE_MD 3 /* Mail destination (obsolete) */
#define TYPE_MF 4 /* Mail forwarder (obsolete) */
#define TYPE_CNAME 5 /* Canonical name */
#define TYPE_SOA 6 /* Start of Authority */
#define TYPE_MB 7 /* Mailbox name (experimental) */
#define TYPE_MG 8 /* Mail group member (experimental) */
#define TYPE_MR 9 /* Mail rename name (experimental) */
#define TYPE_NULL 10 /* Null (experimental) */
#define TYPE_WKS 11 /* Well-known sockets */
#define TYPE_PTR 12 /* Pointer record */
#define TYPE_HINFO 13 /* Host information */
#define TYPE_MINFO 14 /* Mailbox information (experimental)*/
#define TYPE_MX 15 /* Mail exchanger */
#define TYPE_TXT 16 /* Text strings */
#define TYPE_ANY 255 /* Matches any type */
#define CLASS_IN 1 /* The ARPA Internet */
/* Round trip timing parameters */
#define AGAIN 8 /* Average RTT gain = 1/8 */
#define LAGAIN 3 /* Log2(AGAIN) */
#define DGAIN 4 /* Mean deviation gain = 1/4 */
#define LDGAIN 2 /* log2(DGAIN) */
/* Header for all domain messages */
struct dhdr
{
uint16_t id; /* Identification */
uint8_t qr; /* Query/Response */
#define QUERY 0
#define RESPONSE 1
uint8_t opcode;
#define IQUERY 1
uint8_t aa; /* Authoratative answer */
uint8_t tc; /* Truncation */
uint8_t rd; /* Recursion desired */
uint8_t ra; /* Recursion available */
uint8_t rcode; /* Response code */
#define NO_ERROR 0
#define FORMAT_ERROR 1
#define SERVER_FAIL 2
#define NAME_ERROR 3
#define NOT_IMPL 4
#define REFUSED 5
uint16_t qdcount; /* Question count */
uint16_t ancount; /* Answer count */
uint16_t nscount; /* Authority (name server) count */
uint16_t arcount; /* Additional record count */
};
uint8_t* pDNSMSG; // DNS message buffer
uint8_t DNS_SOCKET; // SOCKET number for DNS
uint16_t DNS_MSGID; // DNS message ID
extern uint32_t HAL_GetTick(void);
uint32_t hal_sys_tick;
/* converts uint16_t from network buffer to a host byte order integer. */
uint16_t get16(uint8_t * s)
{
uint16_t i;
i = *s++ << 8;
i = i + *s;
return i;
}
/* copies uint16_t to the network buffer with network byte order. */
uint8_t * put16(uint8_t * s, uint16_t i)
{
*s++ = i >> 8;
*s++ = i;
return s;
}
/*
* CONVERT A DOMAIN NAME TO THE HUMAN-READABLE FORM
*
* Description : This function converts a compressed domain name to the human-readable form
* Arguments : msg - is a pointer to the reply message
* compressed - is a pointer to the domain name in reply message.
* buf - is a pointer to the buffer for the human-readable form name.
* len - is the MAX. size of buffer.
* Returns : the length of compressed message
*/
int parse_name(uint8_t * msg, uint8_t * compressed, char * buf, int16_t len)
{
uint16_t slen; /* Length of current segment */
uint8_t * cp;
int clen = 0; /* Total length of compressed name */
int indirect = 0; /* Set if indirection encountered */
int nseg = 0; /* Total number of segments in name */
cp = compressed;
for (;;)
{
slen = *cp++; /* Length of this segment */
if (!indirect) clen++;
if ((slen & 0xc0) == 0xc0)
{
if (!indirect)
clen++;
indirect = 1;
/* Follow indirection */
cp = &msg[((slen & 0x3f)<<8) + *cp];
slen = *cp++;
}
if (slen == 0) /* zero length == all done */
break;
len -= slen + 1;
if (len < 0) return -1;
if (!indirect) clen += slen;
while (slen-- != 0) *buf++ = (char)*cp++;
*buf++ = '.';
nseg++;
}
if (nseg == 0)
{
/* Root name; represent as single dot */
*buf++ = '.';
len--;
}
*buf++ = '\0';
len--;
return clen; /* Length of compressed message */
}
/*
* PARSE QUESTION SECTION
*
* Description : This function parses the question record of the reply message.
* Arguments : msg - is a pointer to the reply message
* cp - is a pointer to the question record.
* Returns : a pointer the to next record.
*/
uint8_t * dns_question(uint8_t * msg, uint8_t * cp)
{
int len;
char name[MAXCNAME];
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
cp += 2; /* type */
cp += 2; /* class */
return cp;
}
/*
* PARSE ANSER SECTION
*
* Description : This function parses the answer record of the reply message.
* Arguments : msg - is a pointer to the reply message
* cp - is a pointer to the answer record.
* Returns : a pointer the to next record.
*/
uint8_t * dns_answer(uint8_t * msg, uint8_t * cp, uint8_t * ip_from_dns)
{
int len, type;
char name[MAXCNAME];
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
type = get16(cp);
cp += 2; /* type */
cp += 2; /* class */
cp += 4; /* ttl */
cp += 2; /* len */
switch (type)
{
case TYPE_A:
/* Just read the address directly into the structure */
ip_from_dns[0] = *cp++;
ip_from_dns[1] = *cp++;
ip_from_dns[2] = *cp++;
ip_from_dns[3] = *cp++;
break;
case TYPE_CNAME:
case TYPE_MB:
case TYPE_MG:
case TYPE_MR:
case TYPE_NS:
case TYPE_PTR:
/* These types all consist of a single domain name */
/* convert it to ASCII format */
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
break;
case TYPE_HINFO:
len = *cp++;
cp += len;
len = *cp++;
cp += len;
break;
case TYPE_MX:
cp += 2;
/* Get domain name of exchanger */
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
break;
case TYPE_SOA:
/* Get domain name of name server */
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
/* Get domain name of responsible person */
len = parse_name(msg, cp, name, MAXCNAME);
if (len == -1) return 0;
cp += len;
cp += 4;
cp += 4;
cp += 4;
cp += 4;
cp += 4;
break;
case TYPE_TXT:
/* Just stash */
break;
default:
/* Ignore */
break;
}
return cp;
}
/*
* PARSE THE DNS REPLY
*
* Description : This function parses the reply message from DNS server.
* Arguments : dhdr - is a pointer to the header for DNS message
* buf - is a pointer to the reply message.
* len - is the size of reply message.
* Returns : -1 - Domain name length is too big
* 0 - Fail (Timeout or parse error)
* 1 - Success,
*/
int8_t parseDNSMSG(struct dhdr * pdhdr, uint8_t * pbuf, uint8_t * ip_from_dns)
{
uint16_t tmp;
uint16_t i;
uint8_t * msg;
uint8_t * cp;
msg = pbuf;
memset(pdhdr, 0, sizeof(*pdhdr));
pdhdr->id = get16(&msg[0]);
tmp = get16(&msg[2]);
if (tmp & 0x8000) pdhdr->qr = 1;
pdhdr->opcode = (tmp >> 11) & 0xf;
if (tmp & 0x0400) pdhdr->aa = 1;
if (tmp & 0x0200) pdhdr->tc = 1;
if (tmp & 0x0100) pdhdr->rd = 1;
if (tmp & 0x0080) pdhdr->ra = 1;
pdhdr->rcode = tmp & 0xf;
pdhdr->qdcount = get16(&msg[4]);
pdhdr->ancount = get16(&msg[6]);
pdhdr->nscount = get16(&msg[8]);
pdhdr->arcount = get16(&msg[10]);
/* Now parse the variable length sections */
cp = &msg[12];
/* Question section */
for (i = 0; i < pdhdr->qdcount; i++)
{
cp = dns_question(msg, cp);
if(!cp)
{
#ifdef _DNS_DEBUG_
printf("MAX_DOMAIN_NAME is too small, it should be redefined in dns.h\r\n");
#endif
return -1;
}
}
/* Answer section */
for (i = 0; i < pdhdr->ancount; i++)
{
cp = dns_answer(msg, cp, ip_from_dns);
if(!cp)
{
#ifdef _DNS_DEBUG_
printf("MAX_DOMAIN_NAME is too small, it should be redefined in dns.h\r\n");
#endif
return -1;
}
}
/* Name server (authority) section */
for (i = 0; i < pdhdr->nscount; i++)
{
;
}
/* Additional section */
for (i = 0; i < pdhdr->arcount; i++)
{
;
}
if(pdhdr->rcode == 0) return 1; // No error
else return 0;
}
/*
* MAKE DNS QUERY MESSAGE
*
* Description : This function makes DNS query message.
* Arguments : op - Recursion desired
* name - is a pointer to the domain name.
* buf - is a pointer to the buffer for DNS message.
* len - is the MAX. size of buffer.
* Returns : the pointer to the DNS message.
*/
int16_t dns_makequery(uint16_t op, char * name, uint8_t * buf, uint16_t len)
{
uint8_t *cp;
char *cp1;
char sname[MAXCNAME];
char *dname;
uint16_t p;
uint16_t dlen;
cp = buf;
DNS_MSGID++;
cp = put16(cp, DNS_MSGID);
p = (op << 11) | 0x0100; /* Recursion desired */
cp = put16(cp, p);
cp = put16(cp, 1);
cp = put16(cp, 0);
cp = put16(cp, 0);
cp = put16(cp, 0);
strcpy(sname, name);
dname = sname;
dlen = strlen(dname);
for (;;)
{
/* Look for next dot */
cp1 = strchr(dname, '.');
if (cp1 != NULL) len = cp1 - dname; /* More to come */
else len = dlen; /* Last component */
*cp++ = len; /* Write length of component */
if (len == 0) break;
/* Copy component up to (but not including) dot */
memcpy(cp, dname, len);
cp += len;
if (cp1 == NULL)
{
*cp++ = 0; /* Last one; write null and finish */
break;
}
dname += len+1;
dlen -= len+1;
}
cp = put16(cp, 0x0001); /* type */
cp = put16(cp, 0x0001); /* class */
return ((int16_t)((uint32_t)(cp) - (uint32_t)(buf)));
}
/*
* CHECK DNS TIMEOUT
*
* Description : This function check the DNS timeout
* Arguments : None.
* Returns : -1 - timeout occurred, 0 - timer over, but no timeout, 1 - no timer over, no timeout occur
* Note : timeout : retry count and timer both over.
*/
int8_t check_DNS_timeout(void)
{
static uint8_t retry_count;
uint32_t tick = HAL_GetTick();
if(tick - hal_sys_tick >= DNS_WAIT_TIME * 1000)
{
hal_sys_tick = tick;
if(retry_count >= MAX_DNS_RETRY) {
retry_count = 0;
return -1; // timeout occurred
}
retry_count++;
return 0; // timer over, but no timeout
}
return 1; // no timer over, no timeout occur
}
/* DNS CLIENT INIT */
void DNS_init(uint8_t s, uint8_t * buf)
{
DNS_SOCKET = s; // SOCK_DNS
pDNSMSG = buf; // User's shared buffer
DNS_MSGID = DNS_MSG_ID;
}
/* DNS CLIENT RUN */
int8_t DNS_run(uint8_t * dns_ip, uint8_t * name, uint8_t * ip_from_dns)
{
int8_t ret;
struct dhdr dhp;
uint8_t ip[4];
uint16_t len, port;
int8_t ret_check_timeout;
hal_sys_tick = HAL_GetTick();
// Socket open
WIZCHIP_EXPORT(socket)(DNS_SOCKET, Sn_MR_UDP, 0, 0);
#ifdef _DNS_DEBUG_
printf("> DNS Query to DNS Server : %d.%d.%d.%d\r\n", dns_ip[0], dns_ip[1], dns_ip[2], dns_ip[3]);
#endif
len = dns_makequery(0, (char *)name, pDNSMSG, MAX_DNS_BUF_SIZE);
WIZCHIP_EXPORT(sendto)(DNS_SOCKET, pDNSMSG, len, dns_ip, IPPORT_DOMAIN);
while (1)
{
if ((len = getSn_RX_RSR(DNS_SOCKET)) > 0)
{
if (len > MAX_DNS_BUF_SIZE) len = MAX_DNS_BUF_SIZE;
len = WIZCHIP_EXPORT(recvfrom)(DNS_SOCKET, pDNSMSG, len, ip, &port);
#ifdef _DNS_DEBUG_
printf("> Receive DNS message from %d.%d.%d.%d(%d). len = %d\r\n", ip[0], ip[1], ip[2], ip[3],port,len);
#endif
ret = parseDNSMSG(&dhp, pDNSMSG, ip_from_dns);
break;
}
// Check Timeout
ret_check_timeout = check_DNS_timeout();
if (ret_check_timeout < 0) {
#ifdef _DNS_DEBUG_
printf("> DNS Server is not responding : %d.%d.%d.%d\r\n", dns_ip[0], dns_ip[1], dns_ip[2], dns_ip[3]);
#endif
return 0; // timeout occurred
}
else if (ret_check_timeout == 0) {
#ifdef _DNS_DEBUG_
printf("> DNS Timeout\r\n");
#endif
WIZCHIP_EXPORT(sendto)(DNS_SOCKET, pDNSMSG, len, dns_ip, IPPORT_DOMAIN);
}
}
WIZCHIP_EXPORT(close)(DNS_SOCKET);
// Return value
// 0 > : failed / 1 - success
return ret;
}

96
drivers/wiznet5k/internet/dns/dns.h
Wyświetl plik

@ -1,96 +0,0 @@
//*****************************************************************************
//
//! \file dns.h
//! \brief DNS APIs Header file.
//! \details Send DNS query & Receive DNS reponse.
//! \version 1.1.0
//! \date 2013/11/18
//! \par Revision history
//! <2013/10/21> 1st Release
//! <2013/12/20> V1.1.0
//! 1. Remove secondary DNS server in DNS_run
//! If 1st DNS_run failed, call DNS_run with 2nd DNS again
//! 2. DNS_timerHandler -> DNS_time_handler
//! 3. Move the no reference define to dns.c
//! 4. Integrated dns.h dns.c & dns_parse.h dns_parse.c into dns.h & dns.c
//! <2013/12/20> V1.1.0
//!
//! \author Eric Jung & MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef _DNS_H_
#define _DNS_H_
#include <stdint.h>
/*
* @brief Define it for Debug & Monitor DNS processing.
* @note If defined, it depends on <stdio.h>
*/
//#define _DNS_DEBUG_
#define MAX_DNS_BUF_SIZE 256 ///< maximum size of DNS buffer. */
/*
* @brief Maximum length of your queried Domain name
* @todo SHOULD BE defined it equal as or greater than your Domain name length + null character(1)
* @note SHOULD BE careful to stack overflow because it is allocated 1.5 times as MAX_DOMAIN_NAME in stack.
*/
#define MAX_DOMAIN_NAME 32 // for example "www.google.com"
#define MAX_DNS_RETRY 2 ///< Requery Count
#define DNS_WAIT_TIME 4 ///< Wait response time. unit 1s.
#define IPPORT_DOMAIN 53 ///< DNS server port number
#define DNS_MSG_ID 0x1122 ///< ID for DNS message. You can be modified it any number
/*
* @brief DNS process initialize
* @param s : Socket number for DNS
* @param buf : Buffer for DNS message
*/
void DNS_init(uint8_t s, uint8_t * buf);
/*
* @brief DNS process
* @details Send DNS query and receive DNS response
* @param dns_ip : DNS server ip address
* @param name : Domain name to be queried
* @param ip_from_dns : IP address from DNS server
* @return -1 : failed. @ref MAX_DOMIN_NAME is too small \n
* 0 : failed (Timeout or Parse error)\n
* 1 : success
* @note This function blocks until success or fail. max time = @ref MAX_DNS_RETRY * @ref DNS_WAIT_TIME
*/
int8_t DNS_run(uint8_t * dns_ip, uint8_t * name, uint8_t * ip_from_dns);
#endif /* _DNS_H_ */