cc3200: make: Rename "deploy" target to "deploy-ota".

There should be target to deploy uPy over wired (UART) connection, and
wired and OTA targets should be named differently.

cc3200/README.md

@@ -40,15 +40,6 @@ there. Make sure to use a **v4.1 (or higer) LAUNCHXL board** when trying this po
 - Flash the latest service pack (servicepack_1.0.0.10.0.bin) using the "Service Pack Update" button.
 - Close CCS_Uniflash, remove the SOP2 jumper and reset the board.
 
-## Updating the board to with new software version
-- Make sure the board is running and connected to the same network as the computer.
-
-```bash
-make BTARGET=application BTYPE=release BOARD=LAUNCHXL WIPY_IP=192.168.1.1 WIPY_USER=micro WIPY_PWD=python deploy
-```
-
-If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones shown above) will be used.
-
 ## Playing with MicroPython and the CC3200:
 
 Once the software is running, you have two options to access the MicroPython REPL:
@@ -97,6 +88,16 @@ import machine
 machine.reset()
 ```
 
+There's a script which automates this process from the host side:
+
+- Make sure the board is running and connected to the same network as the computer.
+
+```bash
+make BTARGET=application BTYPE=release BOARD=LAUNCHXL WIPY_IP=192.168.1.1 WIPY_USER=micro WIPY_PWD=python deploy-ota
+```
+
+If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones shown above) will be used.
+
 ### Note regarding FileZilla:
 
 Do not use the quick connect button, instead, open the site manager and create a new configuration. In the "General" tab make 

cc3200/application.mk

@@ -206,9 +206,9 @@ WIPY_PWD ?= 'python'
 
 all: $(BUILD)/mcuimg.bin
 
-.PHONY: deploy
+.PHONY: deploy-ota
 
-deploy: $(BUILD)/mcuimg.bin
+deploy-ota: $(BUILD)/mcuimg.bin
 	$(ECHO) "Writing $< to the board"
 	$(Q)$(PYTHON) $(UPDATE_WIPY) --verify --ip $(WIPY_IP) --user $(WIPY_USER) --password $(WIPY_PWD) --file $<