kopia lustrzana https://github.com/micropython/micropython
ports/esp32/boards: Add uPesy EDU ESP32 board.
Signed-off-by: uPesy-computer <alexis@upesy.com>pull/13204/head
rodzic
05d3b22301
commit
2d1580aff8
|
@ -0,0 +1,26 @@
|
|||
{
|
||||
"deploy": [
|
||||
"deploy.md"
|
||||
],
|
||||
"docs": "",
|
||||
"features": [
|
||||
"BLE",
|
||||
"USB-C",
|
||||
"WiFi"
|
||||
],
|
||||
"features_non_filterable": [
|
||||
"Arduino UNO compatible",
|
||||
"Grove Shield compatible"
|
||||
],
|
||||
"images": [
|
||||
"upesy_edu_esp32.jpg"
|
||||
],
|
||||
"mcu": "esp32",
|
||||
"product": "uPesy EDU ESP32",
|
||||
"thumbnail": "",
|
||||
"url": "https://www.upesy.com/products/esp32-arduino-uno-format",
|
||||
"variants": {
|
||||
"IDF3": "Compiled with IDF 3.x"
|
||||
},
|
||||
"vendor": "uPesy"
|
||||
}
|
|
@ -0,0 +1 @@
|
|||
The following files are firmware for the uPesy EDU ESP32 board.
|
|
@ -0,0 +1,46 @@
|
|||
Program your board using the esptool.py program, found [here](https://github.com/espressif/esptool).
|
||||
|
||||
Your uPesy EDU ESP32 has an auto-reset circuit on it, so there is no need to put it into a
|
||||
download mode first to erase or flash it.
|
||||
|
||||
If you are putting MicroPython on your board for the first time then you should
|
||||
first erase the entire flash using:
|
||||
|
||||
### Linux
|
||||
```bash
|
||||
esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash
|
||||
```
|
||||
|
||||
### Mac
|
||||
```bash
|
||||
esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART erase_flash
|
||||
```
|
||||
|
||||
### Windows
|
||||
Change (X) to whatever COM port is being used by the board
|
||||
```bash
|
||||
esptool --chip esp32 --port COM(X) erase_flash
|
||||
```
|
||||
|
||||
Now download the version of the firmware you would like to install from the options below,
|
||||
then use the following command to program the firmware starting at address 0x1000,
|
||||
remembering to replace `upesy-edu-esp32-micropython-firmware-version.bin` with the name of the
|
||||
firmware you just downloaded:
|
||||
|
||||
From then on program the firmware starting at address 0x1000:
|
||||
|
||||
### Linux
|
||||
```bash
|
||||
esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 write_flash -z 0x1000 upesy-edu-esp32-micropython-firmware-version.bin
|
||||
```
|
||||
|
||||
### Mac
|
||||
```bash
|
||||
esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 921600 write_flash -z 0x1000 upesy-edu-esp32-micropython-firmware-version.bin
|
||||
```
|
||||
|
||||
### Windows
|
||||
Change (X) to whatever COM port is being used by the board
|
||||
```bash
|
||||
esptool --chip esp32 --port COM(X) --baud 921600 write_flash -z 0x1000 upesy-edu-esp32-micropython-firmware-version.bin
|
||||
```
|
|
@ -0,0 +1,2 @@
|
|||
include("$(PORT_DIR)/boards/manifest.py")
|
||||
freeze("modules")
|
|
@ -0,0 +1,38 @@
|
|||
# uPesy EDU ESP32 MicroPython Helper Library
|
||||
# 2023 uPesy Electronics
|
||||
|
||||
from micropython import const
|
||||
|
||||
|
||||
SCL = const(22)
|
||||
SDA = const(21)
|
||||
SS = const(5)
|
||||
CS = const(5)
|
||||
MOSI = const(23)
|
||||
SCK = const(18)
|
||||
MISO = const(19)
|
||||
TX = const(1)
|
||||
RX = const(3)
|
||||
LED_BUILTIN = const(2)
|
||||
D19 = const(22)
|
||||
D18 = const(21)
|
||||
D13 = const(18)
|
||||
D12 = const(19)
|
||||
D11 = const(23)
|
||||
D10 = const(5)
|
||||
D9 = const(13)
|
||||
D8 = const(12)
|
||||
D7 = const(14)
|
||||
D6 = const(27)
|
||||
D5 = const(16)
|
||||
D4 = const(17)
|
||||
D3 = const(25)
|
||||
D2 = const(26)
|
||||
D1 = const(1)
|
||||
D0 = const(3)
|
||||
A0 = const(33)
|
||||
A1 = const(32)
|
||||
A2 = const(35)
|
||||
A3 = const(34)
|
||||
A4 = const(36)
|
||||
A5 = const(39)
|
|
@ -0,0 +1,8 @@
|
|||
set(SDKCONFIG_DEFAULTS
|
||||
boards/sdkconfig.base
|
||||
boards/sdkconfig.ble
|
||||
boards/sdkconfig.240mhz
|
||||
boards/UPESY_EDU_ESP32/sdkconfig.board
|
||||
)
|
||||
|
||||
set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
|
|
@ -0,0 +1,10 @@
|
|||
#define MICROPY_HW_BOARD_NAME "uPesy EDU ESP32"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32"
|
||||
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "UP_EDU_ESP32"
|
||||
|
||||
#define MICROPY_HW_I2C0_SCL (22)
|
||||
#define MICROPY_HW_I2C0_SDA (21)
|
||||
|
||||
#define MICROPY_HW_SPI1_SCK (18)
|
||||
#define MICROPY_HW_SPI1_MOSI (23)
|
||||
#define MICROPY_HW_SPI1_MISO (19)
|
|
@ -0,0 +1,32 @@
|
|||
SCL,GPIO22
|
||||
SDA,GPIO21
|
||||
SS,GPIO5
|
||||
CS,GPIO5
|
||||
MOSI,GPIO23
|
||||
SCK,GPIO18
|
||||
MISO,GPIO19
|
||||
TX,GPIO1
|
||||
RX,GPIO3
|
||||
LED_BUILTIN,GPIO2
|
||||
D19,GPIO22
|
||||
D18,GPIO21
|
||||
D13,GPIO18
|
||||
D12,GPIO19
|
||||
D11,GPIO23
|
||||
D10,GPIO5
|
||||
D9,GPIO13
|
||||
D8,GPIO12
|
||||
D7,GPIO14
|
||||
D6,GPIO27
|
||||
D5,GPIO16
|
||||
D4,GPIO17
|
||||
D3,GPIO25
|
||||
D2,GPIO26
|
||||
D1,GPIO1
|
||||
D0,GPIO3
|
||||
A0,GPIO33
|
||||
A1,GPIO32
|
||||
A2,GPIO35
|
||||
A3,GPIO34
|
||||
A4,GPIO36
|
||||
A5,GPIO39
|
|
|
@ -0,0 +1,3 @@
|
|||
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
|
||||
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="UP_EDU_ESP32"
|
Ładowanie…
Reference in New Issue