mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

esp32/boards/UM_TINYPICO: Fix typo in baudrate instructions. 

The installation instructions for ESP32 TinyPICO board contained a typo
that used a non-standard baud rate 912600 instead of 921600.  This made the
upload command fail on some Windows computers.

Signed-off-by: Scott Zhao <zhaomh1998@outlook.com>
pull/13133/head
Scott Zhao 2023-12-05 20:47:06 -05:00 zatwierdzone przez Damien George
rodzic 78b3fe5689
commit 1323a71823
1 zmienionych plików z 3 dodań i 3 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

6
ports/esp32/boards/UM_TINYPICO/deploy.md
Wyświetl plik

@ -31,16 +31,16 @@ From then on program the firmware starting at address 0x1000:
### Linux ### Linux
```bash ```bash
esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 912600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin
``` ```
### Mac ### Mac
```bash ```bash
esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 912600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 921600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin
``` ```
### Windows ### Windows
Change (X) to whatever COM port is being used by the board Change (X) to whatever COM port is being used by the board
```bash ```bash
esptool --chip esp32 --port COM(X) --baud 912600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin esptool --chip esp32 --port COM(X) --baud 921600 write_flash -z 0x1000 tinypico-micropython-firmware-version.bin
``` ```