micropython/ports/stm32/boards/OLIMEX_H407/mpconfigboard.mk

MCU_SERIES = f4
CMSIS_MCU = STM32F407xx
AF_FILE = boards/stm32f405_af.csv
LD_FILES = boards/stm32f405.ld boards/common_ifs.ld
TEXT0_ADDR = 0x08000000
TEXT1_ADDR = 0x08020000
stm32/boards: Add OLIMEX H407 board definition. This change adds the OLIMEX H407 support to the STM32 port. The H407 (https://www.olimex.com/Products/ARM/ST/STM32-H407/) is simliar to the already existing E407 (https://www.olimex.com/Products/ARM/ST/STM32-E407) but does not support Ethernet and has a full-size USB-A port instead of a Mini-USB socket. Both boards use the STM32F407ZGT6 CPU. This port is basically a copy of the E407 but with changed pinmux: * Removed Ethernet pin definition * Removed UART1 (pins are used for other functions) * Removed UART3 flow control pins (pins are used for other functions) * Removed SD-Card detect pin (since it is not connected on the H407) A REPL on UART3 is connected to the U3BOOT-header, a 3-pin header with RX, TX and GND that is intended for the serial terminal. Tested: * Micro-SD Card is detected when inserted on RESET * REPL on UART3 works * Serial port on the mini USB socket Signed-off-by: Chris Fiege <cfi@pengutronix.de> 2021-09-14 09:50:53 +00:00			`MCU_SERIES = f4`
			`CMSIS_MCU = STM32F407xx`
			`AF_FILE = boards/stm32f405_af.csv`
			`LD_FILES = boards/stm32f405.ld boards/common_ifs.ld`
			`TEXT0_ADDR = 0x08000000`
			`TEXT1_ADDR = 0x08020000`