micropython/stmhal/boards/PYBV3/mpconfigboard.h

#define PYBV3

#define MICROPY_HW_BOARD_NAME       "PYBv3"
#define MICROPY_HW_MCU_NAME         "STM32F405RG"

#define MICROPY_HW_HAS_SWITCH       (1)
#define MICROPY_HW_HAS_SDCARD       (1)
#define MICROPY_HW_HAS_MMA7660      (1)
#define MICROPY_HW_HAS_LIS3DSH      (0)
#define MICROPY_HW_HAS_LCD          (0)
#define MICROPY_HW_ENABLE_RNG       (1)
#define MICROPY_HW_ENABLE_RTC       (1)
#define MICROPY_HW_ENABLE_TIMER     (1)
#define MICROPY_HW_ENABLE_SERVO     (1)
#define MICROPY_HW_ENABLE_DAC       (1)
#define MICROPY_HW_ENABLE_I2C1      (1)
#define MICROPY_HW_ENABLE_SPI1      (1)
#define MICROPY_HW_ENABLE_SPI2      (1)
#define MICROPY_HW_ENABLE_SPI3      (0)
#define MICROPY_HW_ENABLE_CAN       (1)

// USRSW has no pullup or pulldown, and pressing the switch makes the input go low
#define MICROPY_HW_USRSW_PIN        (pin_A13)
#define MICROPY_HW_USRSW_PULL       (GPIO_PULLUP)
#define MICROPY_HW_USRSW_EXTI_MODE  (GPIO_MODE_IT_FALLING)
#define MICROPY_HW_USRSW_PRESSED    (0)

// LEDs
#define MICROPY_HW_LED1             (pin_A8)  // R1 - red
#define MICROPY_HW_LED2             (pin_A10) // R2 - red
#define MICROPY_HW_LED3             (pin_C4)  // G1 - green
#define MICROPY_HW_LED4             (pin_C5)  // G2 - green
#define MICROPY_HW_LED_OTYPE        (GPIO_MODE_OUTPUT_PP)
#define MICROPY_HW_LED_ON(pin)      (pin->gpio->BSRRH = pin->pin_mask)
#define MICROPY_HW_LED_OFF(pin)     (pin->gpio->BSRRL = pin->pin_mask)

// SD card detect switch
#define MICROPY_HW_SDCARD_DETECT_PIN        (pin_C13)
#define MICROPY_HW_SDCARD_DETECT_PULL       (GPIO_PULLDOWN)
#define MICROPY_HW_SDCARD_DETECT_PRESENT    (GPIO_PIN_SET)

// USB VBUS detect pin
#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 11:30:35 +00:00			`#define PYBV3`

			`#define MICROPY_HW_BOARD_NAME "PYBv3"`
Change MCU name config micro 2014-06-26 22:35:53 +00:00			`#define MICROPY_HW_MCU_NAME "STM32F405RG"`
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 11:30:35 +00:00
			`#define MICROPY_HW_HAS_SWITCH (1)`
			`#define MICROPY_HW_HAS_SDCARD (1)`
			`#define MICROPY_HW_HAS_MMA7660 (1)`
			`#define MICROPY_HW_HAS_LIS3DSH (0)`
			`#define MICROPY_HW_HAS_LCD (0)`
			`#define MICROPY_HW_ENABLE_RNG (1)`
			`#define MICROPY_HW_ENABLE_RTC (1)`
			`#define MICROPY_HW_ENABLE_TIMER (1)`
			`#define MICROPY_HW_ENABLE_SERVO (1)`
Add shell script to automatically build stmhal/ for all pyboards. 2014-05-02 13:49:44 +00:00			`#define MICROPY_HW_ENABLE_DAC (1)`
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them. 2014-04-20 18:06:15 +00:00			`#define MICROPY_HW_ENABLE_I2C1 (1)`
			`#define MICROPY_HW_ENABLE_SPI1 (1)`
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-16 05:45:21 +00:00			`#define MICROPY_HW_ENABLE_SPI2 (1)`
stmhal: Improved configurability for I2C and SPI busses. The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them. 2014-04-20 18:06:15 +00:00			`#define MICROPY_HW_ENABLE_SPI3 (0)`
stmhal: Add config option to disable/enable CAN driver. 2014-10-05 17:05:26 +00:00			`#define MICROPY_HW_ENABLE_CAN (1)`
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 11:30:35 +00:00
			`// USRSW has no pullup or pulldown, and pressing the switch makes the input go low`
			`#define MICROPY_HW_USRSW_PIN (pin_A13)`
			`#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP)`
			`#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING)`
			`#define MICROPY_HW_USRSW_PRESSED (0)`

			`// LEDs`
			`#define MICROPY_HW_LED1 (pin_A8) // R1 - red`
			`#define MICROPY_HW_LED2 (pin_A10) // R2 - red`
			`#define MICROPY_HW_LED3 (pin_C4) // G1 - green`
			`#define MICROPY_HW_LED4 (pin_C5) // G2 - green`
			`#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_PP)`
			`#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRH = pin->pin_mask)`
			`#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRL = pin->pin_mask)`

			`// SD card detect switch`
			`#define MICROPY_HW_SDCARD_DETECT_PIN (pin_C13)`
			`#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLDOWN)`
			`#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_SET)`
stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it Since all currently supported boards use pin A9 for this function, the value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used, just the fact that it is defined. Addresses issue #1048. 2015-01-07 23:54:57 +00:00
			`// USB VBUS detect pin`
			`#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)`