mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk

39 wiersze
1.0 KiB
Makefile
Czysty Zwykły widok Historia

stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
# By default this board is configured to use mboot which must be deployed first
USE_MBOOT ?= 1
stm32/boards/STM32F769DISC: Use external QSPI flash to store some code. This demonstrates how to use external QSPI flash in XIP (execute in place) mode. The default configuration has all extmod/ code placed into external QSPI flash, but other code can easily be put there by modifying the custom f769_qspi.ld script.
2019-03-04 11:32:44 +00:00
# By default this board puts some code into external QSPI flash set in XIP mode
# USE_MBOOT must be enabled; see f769_qspi.ld for code that goes in QSPI flash
USE_QSPI ?= 1
# MCU settings
stmhal: Add STM32F769DISC board files. With minor changes to adc.c and storage.c to support the F769.
2016-12-12 05:36:35 +00:00
MCU_SERIES = f7
CMSIS_MCU = STM32F769xx
stmhal/Makefile: Rename FLOAT_IMPL to MICROPY_FLOAT_IMPL to match C name The name used in py/mpconfig.h is MICROPY_FLOAT_IMPL so rename this Makefile variable to mirror that.
2017-06-28 05:42:40 +00:00
MICROPY_FLOAT_IMPL = double
stmhal/boards/STM32F769DISC: Get SD card working by using SDMMC2.
2017-03-30 06:58:45 +00:00
AF_FILE = boards/stm32f767_af.csv
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
ifeq ($(USE_MBOOT),1)
stm32/boards/STM32F769DISC: Use external QSPI flash to store some code. This demonstrates how to use external QSPI flash in XIP (execute in place) mode. The default configuration has all extmod/ code placed into external QSPI flash, but other code can easily be put there by modifying the custom f769_qspi.ld script.
2019-03-04 11:32:44 +00:00
ifeq ($(USE_QSPI),1)
# When using Mboot and QSPI the text is split between internal and external flash
LD_FILES = boards/STM32F769DISC/f769_qspi.ld
TEXT0_ADDR = 0x08020000
TEXT1_ADDR = 0x90000000
TEXT0_SECTIONS = .isr_vector .text .data
TEXT1_SECTIONS = .text_qspi
else
# When using Mboot but not QSPI all the text goes together after the filesystem
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
LD_FILES = boards/stm32f769.ld boards/common_blifs.ld
TEXT0_ADDR = 0x08020000
stm32/boards/STM32F769DISC: Use external QSPI flash to store some code. This demonstrates how to use external QSPI flash in XIP (execute in place) mode. The default configuration has all extmod/ code placed into external QSPI flash, but other code can easily be put there by modifying the custom f769_qspi.ld script.
2019-03-04 11:32:44 +00:00
endif
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
else
stm32/boards/STM32F769DISC: Use external QSPI flash to store some code. This demonstrates how to use external QSPI flash in XIP (execute in place) mode. The default configuration has all extmod/ code placed into external QSPI flash, but other code can easily be put there by modifying the custom f769_qspi.ld script.
2019-03-04 11:32:44 +00:00
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
# When not using Mboot the ISR text goes first, then the rest after the filesystem
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage.
2018-03-27 10:17:48 +00:00
LD_FILES = boards/stm32f769.ld boards/common_ifs.ld
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections. This patch forces a board to explicitly define TEXT1_ADDR in order to split the firmware into two separate pieces. Otherwise the default is now to produce only a single continuous firmware image with all ISR, text and data together.
2018-03-27 10:24:15 +00:00
TEXT0_ADDR = 0x08000000
TEXT1_ADDR = 0x08020000
stm32/boards/STM32F769DISC: Use external QSPI flash to store some code. This demonstrates how to use external QSPI flash in XIP (execute in place) mode. The default configuration has all extmod/ code placed into external QSPI flash, but other code can easily be put there by modifying the custom f769_qspi.ld script.
2019-03-04 11:32:44 +00:00
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 05:28:01 +00:00
endif