micropython/shared/tinyusb/tusb_config.h

135 wiersze
4.1 KiB
C
Czysty Zwykły widok Historia

/*
* The MIT License (MIT)
*
* Copyright (c) 2020-2021 Damien P. George
* Copyright (c) 2022 Angus Gratton
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#ifndef MICROPY_INCLUDED_SHARED_TINYUSB_TUSB_CONFIG_H
#define MICROPY_INCLUDED_SHARED_TINYUSB_TUSB_CONFIG_H
#include "py/mpconfig.h"
#if MICROPY_HW_ENABLE_USBDEV
#ifndef MICROPY_HW_USB_MANUFACTURER_STRING
#define MICROPY_HW_USB_MANUFACTURER_STRING "MicroPython"
#endif
#ifndef MICROPY_HW_USB_PRODUCT_FS_STRING
#define MICROPY_HW_USB_PRODUCT_FS_STRING "Board in FS mode"
#endif
#ifndef MICROPY_HW_USB_CDC_INTERFACE_STRING
#define MICROPY_HW_USB_CDC_INTERFACE_STRING "Board CDC"
#endif
#ifndef CFG_TUSB_RHPORT0_MODE
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE)
#endif
#if MICROPY_HW_USB_CDC
#define CFG_TUD_CDC (1)
#else
#define CFG_TUD_CDC (0)
#endif
#if MICROPY_HW_USB_MSC
#define CFG_TUD_MSC (1)
#else
#define CFG_TUD_MSC (0)
#endif
// CDC Configuration
#if CFG_TUD_CDC
#define CFG_TUD_CDC_RX_BUFSIZE ((CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) ? 512 : 256)
#define CFG_TUD_CDC_TX_BUFSIZE ((CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) ? 512 : 256)
#endif
// MSC Configuration
#if CFG_TUD_MSC
#ifndef MICROPY_HW_USB_MSC_INTERFACE_STRING
#define MICROPY_HW_USB_MSC_INTERFACE_STRING "Board MSC"
#endif
// Set MSC EP buffer size to FatFS block size to avoid partial read/writes (offset arg).
#define CFG_TUD_MSC_BUFSIZE (MICROPY_FATFS_MAX_SS)
#endif
// Define static descriptor size and interface count based on the above config
#define USBD_STATIC_DESC_LEN (TUD_CONFIG_DESC_LEN + \
(CFG_TUD_CDC ? (TUD_CDC_DESC_LEN) : 0) + \
(CFG_TUD_MSC ? (TUD_MSC_DESC_LEN) : 0) \
)
#define USBD_STR_0 (0x00)
#define USBD_STR_MANUF (0x01)
#define USBD_STR_PRODUCT (0x02)
#define USBD_STR_SERIAL (0x03)
#define USBD_STR_CDC (0x04)
#define USBD_STR_MSC (0x05)
#define USBD_MAX_POWER_MA (250)
#ifndef MICROPY_HW_USB_DESC_STR_MAX
#define MICROPY_HW_USB_DESC_STR_MAX (20)
#endif
#if CFG_TUD_CDC
#define USBD_ITF_CDC (0) // needs 2 interfaces
#define USBD_CDC_EP_CMD (0x81)
#define USBD_CDC_EP_OUT (0x02)
#define USBD_CDC_EP_IN (0x82)
#endif // CFG_TUD_CDC
#if CFG_TUD_MSC
// Interface & Endpoint numbers for MSC come after CDC, if it is enabled
#if CFG_TUD_CDC
#define USBD_ITF_MSC (2)
#define EPNUM_MSC_OUT (0x03)
#define EPNUM_MSC_IN (0x83)
#else
#define USBD_ITF_MSC (0)
#define EPNUM_MSC_OUT (0x01)
#define EPNUM_MSC_IN (0x81)
#endif // CFG_TUD_CDC
#endif // CFG_TUD_MSC
/* Limits of statically defined USB interfaces, endpoints, strings */
#if CFG_TUD_MSC
#define USBD_ITF_STATIC_MAX (USBD_ITF_MSC + 1)
#define USBD_STR_STATIC_MAX (USBD_STR_MSC + 1)
#define USBD_EP_STATIC_MAX (EPNUM_MSC_OUT + 1)
#elif CFG_TUD_CDC
#define USBD_ITF_STATIC_MAX (USBD_ITF_CDC + 2)
#define USBD_STR_STATIC_MAX (USBD_STR_CDC + 1)
#define USBD_EP_STATIC_MAX (((EPNUM_CDC_EP_IN)&~TUSB_DIR_IN_MASK) + 1)
#else // !CFG_TUD_MSC && !CFG_TUD_CDC
#define USBD_ITF_STATIC_MAX (0)
#define USBD_STR_STATIC_MAX (0)
#define USBD_EP_STATIC_MAX (0)
#endif
#endif // MICROPY_HW_ENABLE_USBDEV
#endif // MICROPY_INCLUDED_SHARED_TINYUSB_TUSB_CONFIG_H