mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/mimxrt/boards/MIMXRT1050_EVK/pins.csv

49 wiersze
905 B
Plaintext
Czysty Zwykły widok Historia

mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 14:03:21 +00:00
D0,GPIO_AD_B1_07
D1,GPIO_AD_B1_06
D2,GPIO_AD_B0_11
D3,GPIO_AD_B1_08
D4,GPIO_AD_B0_09
D5,GPIO_AD_B0_10
D6,GPIO_AD_B1_02
D7,GPIO_AD_B1_03
D8,GPIO_AD_B0_03
D9,GPIO_AD_B0_02
D10,GPIO_SD_B0_01
D11,GPIO_SD_B0_02
D12,GPIO_SD_B0_03
D13,GPIO_SD_B0_00
mimxrt/boards: Fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK. There are several PCB layouts in the market under the same name.
2021-08-19 07:09:43 +00:00
D14,GPIO_AD_B0_01
D15,GPIO_AD_B0_00
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 14:03:21 +00:00
A0,GPIO_AD_B1_10
A1,GPIO_AD_B1_11
A2,GPIO_AD_B1_04
A3,GPIO_AD_B1_05
A4,GPIO_AD_B1_01
A5,GPIO_AD_B1_00
RX,GPIO_AD_B1_07
TX,GPIO_AD_B1_06
SCL,GPIO_AD_B1_00
SDA,GPIO_AD_B1_01
SCK,GPIO_SD_B0_00
SDI,GPIO_SD_B0_03
SDO,GPIO_SD_B0_02
CS,GPIO_SD_B0_01
LED_GREEN,GPIO_AD_B0_09
mixmrt/machine_i2s: Add I2S protocol support. This commit adds support for machine.I2S on the mimxrt port. The I2S API is consistent with the existing stm32, esp32, and rp2 implementations. I2S features: - controller transmit and controller receive - 16-bit and 32-bit sample sizes - mono and stereo formats - sampling frequencies from 8kHz to 48kHz - 3 modes of operation: - blocking - non-blocking with callback - uasyncio - configurable internal buffer - optional MCK Tested with the following development boards: - MIMXRT1010_EVK, MIMXRT1015_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK - Teensy 4.0, Teensy 4.1 - Olimex RT1010 - Seeed ARCH MIX Tested with the following I2S hardware peripherals: - UDA1334 - GY-SPH0645LM4H - WM8960 codec on board the MIMXRT boards and separate breakout board - INMP441 - PCM5102 - SGTL5000 on the Teensy audio shield Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-29 17:50:34 +00:00
MCK,GPIO_AD_B1_09
SCK_RX,GPIO_AD_B1_11
WS_RX,GPIO_AD_B1_10
SD_RX,GPIO_AD_B1_12
SCK_TX,GPIO_AD_B1_14
WS_TX,GPIO_AD_B1_15
SD_TX,GPIO_AD_B1_13
mimxrt/boards/make-pins.py: Update to use tools/boardgen.py. Minor change to remove support for using numeric IDs for machine.Pin. This was previously based on the index of the pin in the board csv, but this is different (and incompatible) with other ports. This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-08-16 06:45:09 +00:00
-ENET_RESET,-GPIO_AD_B0_09
-ENET_INT,-GPIO_AD_B0_10
-SD_CMD,-GPIO_SD_B0_00
-SD_CLK,-GPIO_SD_B0_01
-SD_CD_B,-GPIO_B1_12
-SD_DATA0,-GPIO_SD_B0_02
-SD_DATA1,-GPIO_SD_B0_03
-SD_DATA2,-GPIO_SD_B0_04
-SD_DATA3,-GPIO_SD_B0_05