mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/zephyr/prj.conf

79 wiersze
1.8 KiB
Plaintext
Czysty Zwykły widok Historia

zephyr/prj_base.conf: Force zephyr.bin build output. As useful for CI systems. 1.10 doesn't build .bin for qemu_* for example. Also, remove deprecated CONFIG_LEGACY_KERNEL option.
2017-11-28 12:11:46 +00:00
CONFIG_BUILD_OUTPUT_BIN=y
zephyr/modmachine: Implement machine.reset().
2017-04-19 10:27:51 +00:00
CONFIG_REBOOT=y
zephyr/prj_base.conf: Disable legacy kernel compatibility. This keeps dependency on mdef, sysgen and other stuff which complicates build integration.
2017-03-27 14:06:20 +00:00
zephyr: Initial Zephyr RTOS port, Zephyr part.
2016-07-22 17:19:17 +00:00
CONFIG_STDOUT_CONSOLE=y
CONFIG_CONSOLE_HANDLER=y
zephyr/zephyr_getchar: Update for recent Zephyr refactor of console hooks. uart_irq_input_hook_set() was renamed to uart_console_in_debug_hook_install() and accepts different params.
2016-10-26 14:49:20 +00:00
CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS=y
zephyr: Switch to interrupt-driven pull-style console. While this console API improves handling on real hardware boards (e.g. clipboard paste is much more reliable, as well as programmatic communication), it vice-versa poses problems under QEMU, apparently because it doesn't emulate UART interrupt handling faithfully. That leads to inability to run the testsuite on QEMU at all. To work that around, we have to suuport both old and new console routines, and use the old ones under QEMU.
2017-10-07 14:09:53 +00:00
zephyr: Rename CONFIG_CONSOLE_PULL to CONFIG_CONSOLE_SUBSYS. Following a similar change in the Zephyr Project.
2018-06-27 05:33:59 +00:00
CONFIG_CONSOLE_SUBSYS=y
zephyr: Switch to interrupt-driven pull-style console. While this console API improves handling on real hardware boards (e.g. clipboard paste is much more reliable, as well as programmatic communication), it vice-versa poses problems under QEMU, apparently because it doesn't emulate UART interrupt handling faithfully. That leads to inability to run the testsuite on QEMU at all. To work that around, we have to suuport both old and new console routines, and use the old ones under QEMU.
2017-10-07 14:09:53 +00:00
CONFIG_CONSOLE_GETCHAR=y
CONFIG_CONSOLE_GETCHAR_BUFSIZE=128
CONFIG_CONSOLE_PUTCHAR_BUFSIZE=128
zephyr: Initial Zephyr RTOS port, Zephyr part.
2016-07-22 17:19:17 +00:00
CONFIG_NEWLIB_LIBC=y
zephyr: Fix floating point configuration. Zephyr renamed CONFIG_FLOAT to CONFIG_FPU to better reflect its semantics of enabling the hardware floating point unit (FPU) rather than enabling toolchain-level floating point support (i.e., software floating point for FPU-less socs).
2020-05-02 16:38:58 +00:00
CONFIG_FPU=y
zephyr/prj_base.conf: Bump MAIN_STACK_SIZE to let builtin testsuite run.
2017-12-15 16:17:00 +00:00
CONFIG_MAIN_STACK_SIZE=4736
zephyr: Run scheduled callbacks at REPL and during mp_hal_delay_ms. And ctrl-C can now interrupt a time.sleep call. This uses Zephyr's k_poll API to wait efficiently for an event signal, and an optional semaphore. Signed-off-by: Damien George <damien@micropython.org>
2021-04-25 12:28:55 +00:00
CONFIG_POLL=y
zephyr: Enable SLIP networking for the default build. This makes MicroPython app running in QEMU be pingable from the host (by following QEMU networking setup instructions, https://www.zephyrproject.org/doc/samples/net/qemu_setup.html).
2017-01-21 14:16:35 +00:00
zephyr/modzsensor: Zephyr sensor subsystem bindings.
2018-01-16 14:29:54 +00:00
# Enable sensor subsystem (doesn't add code if not used).
# Specific sensors should be enabled per-board.
CONFIG_SENSOR=y
zephyr: Enable SLIP networking for the default build. This makes MicroPython app running in QEMU be pingable from the host (by following QEMU networking setup instructions, https://www.zephyrproject.org/doc/samples/net/qemu_setup.html).
2017-01-21 14:16:35 +00:00
# Networking config
CONFIG_NETWORKING=y
CONFIG_NET_IPV4=y
zephyr: Enable IPv6 networking in addition to IPv4.
2017-02-14 13:23:54 +00:00
CONFIG_NET_IPV6=y
zephyr/prj_base.conf: Enable TCP (and UDP explicitly).
2017-03-28 21:46:06 +00:00
CONFIG_NET_UDP=y
CONFIG_NET_TCP=y
zephyr/modusocket: Allow to use socketized net_context in upstream. Accesses recv_q, accept_q directly in net_context.
2017-08-07 18:36:57 +00:00
CONFIG_NET_SOCKETS=y
zephyr: Disable CONFIG_NET_SOCKETS_POSIX_NAMES. Zephyr's default value for CONFIG_NET_SOCKETS_POSIX_NAMES was changed from false to true between Zephyr v2.5.0 and v2.6.0. This caused conflicts in MicroPython, which uses the zsock_ prefixed functions, so disable it. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-05-21 02:03:25 +00:00
CONFIG_NET_SOCKETS_POSIX_NAMES=n
zephyr: Enable SLIP networking for the default build. This makes MicroPython app running in QEMU be pingable from the host (by following QEMU networking setup instructions, https://www.zephyrproject.org/doc/samples/net/qemu_setup.html).
2017-01-21 14:16:35 +00:00
CONFIG_TEST_RANDOM_GENERATOR=y
zephyr/prj_base.conf: Add config for net_buf logging. Disabled by default.
2017-04-03 09:07:56 +00:00
zephyr/prj_base.conf: Update for net_config subsys refactor. net_config subsystem was split off from net_app, and as a result, settings need renaming from CONFIG_NET_APP_* to CONFIG_NET_CONFIG_*.
2018-08-18 12:46:18 +00:00
CONFIG_NET_CONFIG_SETTINGS=y
CONFIG_NET_CONFIG_INIT_TIMEOUT=3
CONFIG_NET_CONFIG_NEED_IPV6=y
CONFIG_NET_CONFIG_NEED_IPV4=y
zephyr: Use CONFIG_NET_APP_SETTINGS to setup initial network addresses. Ideally, these should be configurable from Python (using network module), but as that doesn't exist, we better off using Zephyr's native bootstrap configuration facility.
2017-10-07 11:08:50 +00:00
zephyr/modusocket: Implement getaddrinfo().
2017-05-13 13:42:35 +00:00
# DNS
CONFIG_DNS_RESOLVER=y
CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES=2
CONFIG_DNS_SERVER_IP_ADDRESSES=y
zephyr/prj_base.conf: Enable DHCP and group static IPs together. Add CONFIG_NET_DHCPV4, which, after https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows: static addresses are configured after boot, and DHCP requests are sent at the same time. If valid DHCP reply is received, it overrides static addresses. This setup works out of the box for both direct connection to a workstation (DHCP server usually is not available) and for connection to a router (DHCP is available and required).
2018-01-23 19:28:57 +00:00
# Static IP addresses
zephyr/prj_base.conf: Update for net_config subsys refactor. net_config subsystem was split off from net_app, and as a result, settings need renaming from CONFIG_NET_APP_* to CONFIG_NET_CONFIG_*.
2018-08-18 12:46:18 +00:00
CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2"
zephyr/modusocket: Implement getaddrinfo().
2017-05-13 13:42:35 +00:00
CONFIG_DNS_SERVER1="192.0.2.2"
zephyr/prj_base.conf: Enable DHCP and group static IPs together. Add CONFIG_NET_DHCPV4, which, after https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows: static addresses are configured after boot, and DHCP requests are sent at the same time. If valid DHCP reply is received, it overrides static addresses. This setup works out of the box for both direct connection to a workstation (DHCP server usually is not available) and for connection to a router (DHCP is available and required).
2018-01-23 19:28:57 +00:00
# DHCP configuration. Until DHCP address is assigned,
# static configuration above is used instead.
CONFIG_NET_DHCPV4=y
zephyr/prj_base.conf: Enable CONFIG_INIT_STACKS. As required for zephyr.stack_analyze().
2017-08-16 06:22:30 +00:00
# Diagnostics and debugging
# Required for zephyr.stack_analyze()
zephyr: Fix and rename stacks_analyze function in zephyr module. Zephyr deprecated and then removed its stack_analyze function because it was unsafe. Use the new zephyr thread analyzer instead and rename the MicroPython function to zephyr.thread_analyze() to be more consistent with the implementation. Tested on mimxrt1050_evk. The output now looks like this: >>> zephyr.thread_analyze() Thread analyze: 80004ff4 : unused 400 usage 112 / 512 (21 %) rx_workq : unused 1320 usage 180 / 1500 (12 %) tx_workq : unused 992 usage 208 / 1200 (17 %) net_mgmt : unused 656 usage 112 / 768 (14 %) sysworkq : unused 564 usage 460 / 1024 (44 %) idle : unused 256 usage 64 / 320 (20 %) main : unused 2952 usage 1784 / 4736 (37 %)
2020-05-02 16:21:48 +00:00
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_USE_PRINTK=y
zephyr/modzephyr: Revamp stacks_analyze() call. Underlying k_call_stacks_analyze() was gone in Zephyr, reimplement using k_thread_foreach().
2018-09-26 21:24:40 +00:00
CONFIG_THREAD_NAME=y
zephyr/prj_base.conf: Enable CONFIG_INIT_STACKS. As required for zephyr.stack_analyze().
2017-08-16 06:22:30 +00:00
zephyr/modusocket: Wrap pkt_get_info() call. The most important info it returns are numbers of free buffers in different pools (rx/tx packet headers, data fragments).
2017-05-13 12:22:22 +00:00
# Required for usocket.pkt_get_info()
CONFIG_NET_BUF_POOL_USAGE=y
zephyr: Replace broken shell_net_iface() with more general shell_exec(). The zephyr function net_shell_cmd_iface() was removed in zephyr v1.14.0, therefore the MicroPython zephyr port did not build with newer zephyr versions when CONFIG_NET_SHELL=y. Replace with a more general shell_exec() function that can execute any zephyr shell command. For example: >>> zephyr.shell_exec("net") Subcommands: allocs :Print network memory allocations. arp :Print information about IPv4 ARP cache. conn :Print information about network connections. dns :Show how DNS is configured. events :Monitor network management events. gptp :Print information about gPTP support. iface :Print information about network interfaces. ipv6 :Print information about IPv6 specific information and configuration. mem :Print information about network memory usage. nbr :Print neighbor information. ping :Ping a network host. pkt :net_pkt information. ppp :PPP information. resume :Resume a network interface route :Show network route. stacks :Show network stacks information. stats :Show network statistics. suspend :Suspend a network interface tcp :Connect/send/close TCP connection. vlan :Show VLAN information. websocket :Print information about WebSocket connections. >>> zephyr.shell_exec("kernel") kernel - Kernel commands Subcommands: cycles :Kernel cycles. reboot :Reboot. stacks :List threads stack usage. threads :List kernel threads. uptime :Kernel uptime. version :Kernel version. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-11-30 16:45:05 +00:00
# Required for zephyr.shell_exec()
#CONFIG_SHELL=y
#CONFIG_SHELL_BACKEND_SERIAL_INTERRUPT_DRIVEN=n
# Required for zephyr.shell_exec("net iface")
zephyr/modzephyr: Add shell_net_iface() function. Calls out to Zephyr's shell, submodule "net", command "iface", and shows network interface information (if CONFIG_NET_SHELL is enabled).
2017-08-20 05:45:00 +00:00
#CONFIG_NET_SHELL=y
zephyr/prj_base.conf: Add config for net_buf logging. Disabled by default.
2017-04-03 09:07:56 +00:00
# Uncomment to enable "INFO" level net_buf logging
#CONFIG_NET_LOG=y
#CONFIG_NET_DEBUG_NET_BUF=y
# Change to 4 for "DEBUG" level
#CONFIG_SYS_LOG_NET_LEVEL=3
zephyr: Build MicroPython as a cmake target. Refactors the zephyr build infrastructure to build MicroPython as a cmake target, using the recently introduced core cmake rules. This change makes it possible to build the zephyr port like most other zephyr applications using west or cmake directly. It simplifies building with extra cmake arguments, such as specifying an alternate conf file or adding an Arduino shield. It also enables building the zephyr port anywhere in the host file system, which will allow regressing across multiple boards with the zephyr twister script. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-10-11 18:11:31 +00:00
# MicroPython options
CONFIG_MICROPY_CONFIGFILE="mpconfigport.h"
CONFIG_MICROPY_VFS_FAT=y
CONFIG_MICROPY_VFS_LFS2=y