micropython/ports/zephyr/boards/frdm_k64f.conf

# Networking drivers
CONFIG_NET_L2_ETHERNET=y

# Hardware features
CONFIG_I2C=y
CONFIG_SPI=y

# Sensor drivers
CONFIG_FXOS8700=y
CONFIG_FXOS8700_MODE_HYBRID=y
CONFIG_FXOS8700_TEMP=y

# Flash drivers
CONFIG_FLASH=y
CONFIG_FLASH_MAP=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y
zephyr/prj_frdm_k64f.conf: Add, enable Ethernet support. 2017-01-27 20:48:42 +00:00			`# Networking drivers`
			`CONFIG_NET_L2_ETHERNET=y`
zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor. Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the frdm_k64f board configuration. 2019-02-28 19:14:41 +00:00
zephyr: Switch back to enabling I2C in board-specific configs. I2C can't be enabled in prj_base.conf because it's a board-specific feature. For example, if a board doesn't have I2C but CONFIG_I2C=y then the build will fail (on Zephyr build system side). The patch here gets the qemu_cortex_m3 build working again. 2019-03-28 14:15:42 +00:00			`# Hardware features`
			`CONFIG_I2C=y`
zephyr/machine_spi: Add support for hardware SPI. Adds support for hardware SPI to the zephyr port. Consistent with other ports, such as rp2 and stm32, we only implement the SPI protocol functions (init and transfer). Explicit sck/mosi/miso selection is not supported and new SPI instances are initialized with default values. 2021-06-14 21:57:29 +00:00			`CONFIG_SPI=y`
zephyr: Switch back to enabling I2C in board-specific configs. I2C can't be enabled in prj_base.conf because it's a board-specific feature. For example, if a board doesn't have I2C but CONFIG_I2C=y then the build will fail (on Zephyr build system side). The patch here gets the qemu_cortex_m3 build working again. 2019-03-28 14:15:42 +00:00
zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor. Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the frdm_k64f board configuration. 2019-02-28 19:14:41 +00:00			`# Sensor drivers`
			`CONFIG_FXOS8700=y`
			`CONFIG_FXOS8700_MODE_HYBRID=y`
			`CONFIG_FXOS8700_TEMP=y`
zephyr: Implement block device protocol via zephyr flash map api. Introduces a new zephyr.FlashArea class that uses the zephyr flash map api to implement the uos.AbstractBlockDev protocol. The flash driver is enabled on the frdm_k64f board, reel_board, and rv32m1_vega_ri5cy board. The standard and extended block device protocols are both supported, therefore this class can be used with file systems like littlefs which require the extended interface. 2019-12-30 23:44:15 +00:00
			`# Flash drivers`
			`CONFIG_FLASH=y`
			`CONFIG_FLASH_MAP=y`
			`CONFIG_MPU_ALLOW_FLASH_WRITE=y`