micropython/ports/samd/boards/SEEED_WIO_TERMINAL/mpconfigboard.h

#define MICROPY_HW_BOARD_NAME "Wio Terminal D51R"
#define MICROPY_HW_MCU_NAME   "SAMD51P19A"

#define MICROPY_HW_XOSC32K          (1)

#define MICROPY_HW_QSPIFLASH        W25Q32JV_IQ
samd/boards/SEEED_WIO_TERMINAL: Add new board definition. 2021-05-20 07:50:08 +00:00			`#define MICROPY_HW_BOARD_NAME "Wio Terminal D51R"`
			`#define MICROPY_HW_MCU_NAME "SAMD51P19A"`
samd/boards/SEEED_WIO_TERMINAL: Enable using the 32kHz crystal. That was missing from the configuration. 2022-11-05 20:16:21 +00:00
			`#define MICROPY_HW_XOSC32K (1)`
samd/samd_qspiflash: Add QSPI flash driver and configure it accordingly. The QSPI driver provides the interface for using an on-board QSPI flash for the filesystem. It provides the same methods as the driver for the internal flash and uses the same name. Therefore, only one of the drivers for internal flash, SPI flash and QSPI flash must be enabled at a time. Signed-off-by: robert-hh <robert@hammelrath.com> 2023-05-24 14:16:40 +00:00
			`#define MICROPY_HW_QSPIFLASH W25Q32JV_IQ`