micropython/docs/library/pyb.ADC.rst

.. _pyb.ADC:

class ADC -- analog to digital conversion: read analog values on a pin
======================================================================

.. only:: port_pyboard

    Usage::
    
        import pyb
    
        adc = pyb.ADC(pin)              # create an analog object from a pin
        val = adc.read()                # read an analog value
    
        adc = pyb.ADCAll(resolution)    # creale an ADCAll object
        val = adc.read_channel(channel) # read the given channel
        val = adc.read_core_temp()      # read MCU temperature
        val = adc.read_core_vbat()      # read MCU VBAT
        val = adc.read_core_vref()      # read MCU VREF

.. only:: port_wipy

    Usage::
    
       import pyb

       adc = pyb.ADC(pin)              # create an analog object on one of the 4 ADC channels
       val = adc.read()                # read an analog value
       adc.deinit()                    # disable the adc channel
       adc.init()                      # enable the adc channel

Constructors
------------

.. only:: port_pyboard

    .. class:: pyb.ADC(pin)
    
       Create an ADC object associated with the given pin.
       This allows you to then read analog values on that pin.

.. only:: port_wipy

    .. class:: pyb.ADC(pin)
    
       Create an ADC object associated with the given pin.
       This allows you to then read analog values on that pin.
       For more info check the `pinout and alternate functions
       table. <https://raw.githubusercontent.com/wipy/wipy/master/docs/PinOUT.png>`_ 

       .. warning:: 
       
          ADC pin input range is 0-1.4V (being 1.8V the absolute maximum that it 
          can withstand). When GP2, GP3, GP4 or GP5 are remapped to the 
          ADC block, 1.8 V is the maximum. If these pins are used in digital mode, 
          then the maximum allowed input is 3.6V.

Methods
-------

.. method:: adc.read()

   Read the value on the analog pin and return it.  The returned value
   will be between 0 and 4095.

.. only:: port_pyboard

    .. method:: adc.read_timed(buf, timer)
    
       Read analog values into ``buf`` at a rate set by the ``timer`` object.

       ``buf`` can be bytearray or array.array for example.  The ADC values have
       12-bit resolution and are stored directly into ``buf`` if its element size is
       16 bits or greater.  If ``buf`` has only 8-bit elements (eg a bytearray) then
       the sample resolution will be reduced to 8 bits.

       ``timer`` should be a Timer object, and a sample is read each time the timer
       triggers.  The timer must already be initialised and running at the desired
       sampling frequency.

       To support previous behaviour of this function, ``timer`` can also be an
       integer which specifies the frequency (in Hz) to sample at.  In this case
       Timer(6) will be automatically configured to run at the given frequency.

       Example using a Timer object (preferred way)::

           adc = pyb.ADC(pyb.Pin.board.X19)    # create an ADC on pin X19
           tim = pyb.Timer(6, freq=10)         # create a timer running at 10Hz
           buf = bytearray(100)                # creat a buffer to store the samples
           adc.read_timed(buf, tim)            # sample 100 values, taking 10s

       Example using an integer for the frequency::

           adc = pyb.ADC(pyb.Pin.board.X19)    # create an ADC on pin X19
           buf = bytearray(100)                # create a buffer of 100 bytes
           adc.read_timed(buf, 10)             # read analog values into buf at 10Hz
                                               #   this will take 10 seconds to finish
           for val in buf:                     # loop over all values
               print(val)                      # print the value out
       
       This function does not allocate any memory.

.. only:: port_wipy

   .. method:: adc.init()

      Enable the ADC channel.

   .. method:: adc.deinit()

      Disable the ADC channel.