micropython/ports/stm32/usbd_msc_interface.c

349 wiersze
10 KiB
C
Czysty Zwykły widok Historia

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013-2019 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include "usbd_cdc_msc_hid.h"
#include "usbd_msc_interface.h"
#include "extmod/vfs.h"
#include "storage.h"
#include "sdcard.h"
#if MICROPY_HW_USB_MSC
// This flag is needed to support removal of the medium, so that the USB drive
// can be unmounted and won't be remounted automatically.
#define FLAGS_STARTED (0x01)
#define FLAGS_READONLY (0x02)
STATIC const void *usbd_msc_lu_data[USBD_MSC_MAX_LUN];
STATIC uint8_t usbd_msc_lu_num;
STATIC uint16_t usbd_msc_lu_flags;
static inline void lu_flag_set(uint8_t lun, uint8_t flag) {
usbd_msc_lu_flags |= flag << (lun * 2);
}
static inline void lu_flag_clr(uint8_t lun, uint8_t flag) {
usbd_msc_lu_flags &= ~(flag << (lun * 2));
}
static inline bool lu_flag_is_set(uint8_t lun, uint8_t flag) {
return usbd_msc_lu_flags & (flag << (lun * 2));
}
// Sent in response to MODE SENSE(6) command
const uint8_t USBD_MSC_Mode_Sense6_Data[4] = {
0x03, // mode data length
0x00, // medium type
0x00, // bit 7: write protect
0x00, // block descriptor length
};
// Sent in response to MODE SENSE(10) command
const uint8_t USBD_MSC_Mode_Sense10_Data[8] = {
0x00, 0x06, // mode data length
0x00, // medium type
0x00, // bit 7: write protect
0x00,
0x00,
0x00, 0x00, // block descriptor length
};
STATIC const uint8_t usbd_msc_vpd00[6] = {
0x00, // peripheral qualifier; peripheral device type
0x00, // page code
0x00, // reserved
2, // page length (additional bytes beyond this entry)
0x00, // page 0x00 supported
0x83, // page 0x83 supported
};
STATIC const uint8_t usbd_msc_vpd83[4] = {
0x00, // peripheral qualifier; peripheral device type
0x83, // page code
0x00, 0x00, // page length (additional bytes beyond this entry)
};
STATIC const int8_t usbd_msc_inquiry_data[36] = {
0x00, // peripheral qualifier; peripheral device type
0x80, // 0x00 for a fixed drive, 0x80 for a removable drive
0x02, // version
0x02, // response data format
(STANDARD_INQUIRY_DATA_LEN - 5), // additional length
0x00, // various flags
0x00, // various flags
0x00, // various flags
'M', 'i', 'c', 'r', 'o', 'P', 'y', ' ', // Manufacturer : 8 bytes
'p', 'y', 'b', 'o', 'a', 'r', 'd', ' ', // Product : 16 Bytes
'F', 'l', 'a', 's', 'h', ' ', ' ', ' ',
'1', '.', '0', '0', // Version : 4 Bytes
};
// Set the logical units that will be exposed over MSC
void usbd_msc_init_lu(size_t lu_n, const void *lu_data) {
usbd_msc_lu_num = MIN(lu_n, USBD_MSC_MAX_LUN);
memcpy(usbd_msc_lu_data, lu_data, sizeof(void *) * usbd_msc_lu_num);
usbd_msc_lu_flags = 0;
}
// Helper function to perform an ioctl on a logical unit
STATIC int lu_ioctl(uint8_t lun, int op, uint32_t *data) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
const void *lu = usbd_msc_lu_data[lun];
if (lu == &pyb_flash_type) {
switch (op) {
case MP_BLOCKDEV_IOCTL_INIT:
storage_init();
*data = 0;
return 0;
case MP_BLOCKDEV_IOCTL_SYNC:
storage_flush();
return 0;
case MP_BLOCKDEV_IOCTL_BLOCK_SIZE:
*data = storage_get_block_size();
return 0;
case MP_BLOCKDEV_IOCTL_BLOCK_COUNT:
*data = storage_get_block_count();
return 0;
default:
return -1;
}
#if MICROPY_HW_ENABLE_SDCARD
} else if (lu == &pyb_sdcard_type
#if MICROPY_HW_ENABLE_MMCARD
|| lu == &pyb_mmcard_type
#endif
) {
switch (op) {
case MP_BLOCKDEV_IOCTL_INIT:
if (!sdcard_power_on()) {
return -1;
}
*data = 0;
return 0;
case MP_BLOCKDEV_IOCTL_SYNC:
return 0;
case MP_BLOCKDEV_IOCTL_BLOCK_SIZE:
*data = SDCARD_BLOCK_SIZE;
return 0;
case MP_BLOCKDEV_IOCTL_BLOCK_COUNT:
*data = sdcard_get_capacity_in_bytes() / (uint64_t)SDCARD_BLOCK_SIZE;
return 0;
default:
return -1;
}
#endif
} else {
return -1;
}
}
// Initialise all logical units (it's only ever called once, with lun_in=0)
STATIC int8_t usbd_msc_Init(uint8_t lun_in) {
if (lun_in != 0) {
return 0;
}
for (int lun = 0; lun < usbd_msc_lu_num; ++lun) {
uint32_t data = 0;
int res = lu_ioctl(lun, MP_BLOCKDEV_IOCTL_INIT, &data);
if (res != 0) {
lu_flag_clr(lun, FLAGS_STARTED);
} else {
lu_flag_set(lun, FLAGS_STARTED);
if (data) {
lu_flag_set(lun, FLAGS_READONLY);
}
}
}
return 0;
}
// Process SCSI INQUIRY command for the logical unit
STATIC int usbd_msc_Inquiry(uint8_t lun, const uint8_t *params, uint8_t *data_out) {
if (params[1] & 1) {
// EVPD set - return vital product data parameters
uint8_t page_code = params[2];
switch (page_code) {
case 0x00: // Supported VPD pages
memcpy(data_out, usbd_msc_vpd00, sizeof(usbd_msc_vpd00));
return sizeof(usbd_msc_vpd00);
case 0x83: // Device identification
memcpy(data_out, usbd_msc_vpd83, sizeof(usbd_msc_vpd83));
return sizeof(usbd_msc_vpd83);
default: // Unsupported
return -1;
}
}
// A standard inquiry
if (lun >= usbd_msc_lu_num) {
return -1;
}
uint8_t alloc_len = params[3] << 8 | params[4];
int len = MIN(sizeof(usbd_msc_inquiry_data), alloc_len);
memcpy(data_out, usbd_msc_inquiry_data, len);
#if MICROPY_HW_ENABLE_SDCARD
const void *lu = usbd_msc_lu_data[lun];
if (len == sizeof(usbd_msc_inquiry_data)) {
if (lu == &pyb_sdcard_type) {
memcpy(data_out + 24, "SDCard", sizeof("SDCard") - 1);
}
#if MICROPY_HW_ENABLE_MMCARD
else if (lu == &pyb_mmcard_type) {
memcpy(data_out + 24, "MMCard", sizeof("MMCard") - 1);
}
#endif
}
#endif
return len;
}
// Get storage capacity of a logical unit
STATIC int8_t usbd_msc_GetCapacity(uint8_t lun, uint32_t *block_num, uint16_t *block_size) {
uint32_t block_size_u32 = 0;
int res = lu_ioctl(lun, MP_BLOCKDEV_IOCTL_BLOCK_SIZE, &block_size_u32);
if (res != 0) {
return -1;
}
*block_size = block_size_u32;
return lu_ioctl(lun, MP_BLOCKDEV_IOCTL_BLOCK_COUNT, block_num);
}
// Check if a logical unit is ready
STATIC int8_t usbd_msc_IsReady(uint8_t lun) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
return lu_flag_is_set(lun, FLAGS_STARTED) ? 0 : -1;
}
// Check if a logical unit is write protected
STATIC int8_t usbd_msc_IsWriteProtected(uint8_t lun) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
return lu_flag_is_set(lun, FLAGS_READONLY) ? 1 : 0;
}
// Start or stop a logical unit
STATIC int8_t usbd_msc_StartStopUnit(uint8_t lun, uint8_t started) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
if (started) {
lu_flag_set(lun, FLAGS_STARTED);
} else {
lu_flag_clr(lun, FLAGS_STARTED);
}
return 0;
}
// Prepare a logical unit for possible removal
STATIC int8_t usbd_msc_PreventAllowMediumRemoval(uint8_t lun, uint8_t param) {
uint32_t dummy;
// Sync the logical unit so the device can be unplugged/turned off
return lu_ioctl(lun, MP_BLOCKDEV_IOCTL_SYNC, &dummy);
}
// Read data from a logical unit
STATIC int8_t usbd_msc_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
const void *lu = usbd_msc_lu_data[lun];
if (lu == &pyb_flash_type) {
storage_read_blocks(buf, blk_addr, blk_len);
return 0;
#if MICROPY_HW_ENABLE_SDCARD
} else if (lu == &pyb_sdcard_type
#if MICROPY_HW_ENABLE_MMCARD
|| lu == &pyb_mmcard_type
#endif
) {
if (sdcard_read_blocks(buf, blk_addr, blk_len) == 0) {
return 0;
}
#endif
}
return -1;
}
// Write data to a logical unit
STATIC int8_t usbd_msc_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
if (lun >= usbd_msc_lu_num) {
return -1;
}
const void *lu = usbd_msc_lu_data[lun];
if (lu == &pyb_flash_type) {
storage_write_blocks(buf, blk_addr, blk_len);
return 0;
#if MICROPY_HW_ENABLE_SDCARD
} else if (lu == &pyb_sdcard_type
#if MICROPY_HW_ENABLE_MMCARD
|| lu == &pyb_mmcard_type
#endif
) {
if (sdcard_write_blocks(buf, blk_addr, blk_len) == 0) {
return 0;
}
#endif
}
return -1;
}
// Get the number of attached logical units
STATIC int8_t usbd_msc_GetMaxLun(void) {
return usbd_msc_lu_num - 1;
}
// Table of operations for the SCSI layer to call
const USBD_StorageTypeDef usbd_msc_fops = {
usbd_msc_Init,
usbd_msc_Inquiry,
usbd_msc_GetCapacity,
usbd_msc_IsReady,
usbd_msc_IsWriteProtected,
usbd_msc_StartStopUnit,
usbd_msc_PreventAllowMediumRemoval,
usbd_msc_Read,
usbd_msc_Write,
usbd_msc_GetMaxLun,
};
#endif // MICROPY_HW_USB_MSC