micropython/stmhal/ffconf.h

213 wiersze
8.5 KiB
C
Czysty Zwykły widok Historia

/*---------------------------------------------------------------------------/
/ FatFs - FAT file system module configuration file R0.10 (C)ChaN, 2013
/----------------------------------------------------------------------------/
/
/ CAUTION! Do not forget to make clean the project after any changes to
/ the configuration options.
/
/----------------------------------------------------------------------------*/
#ifndef _FFCONF
#define _FFCONF 80960 /* Revision ID */
#include "mpconfigport.h"
/*---------------------------------------------------------------------------/
/ Functions and Buffer Configurations
/----------------------------------------------------------------------------*/
#define _FS_TINY 1 /* 0:Normal or 1:Tiny */
/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
/ object instead of the sector buffer in the individual file object for file
/ data transfer. This reduces memory consumption 512 bytes each file object. */
#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
/* Setting _FS_READONLY to 1 defines read only configuration. This removes
/ writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
/ f_rename(), f_truncate() and useless f_getfree(). */
#define _FS_MINIMIZE 0 /* 0 to 3 */
/* The _FS_MINIMIZE option defines minimization level to remove API functions.
/
/ 0: All basic functions are enabled.
/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
/ f_truncate() and f_rename() function are removed.
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
/ 3: f_lseek() function is removed in addition to 2. */
#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */
/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
#define _USE_MKFS 1 /* 0:Disable or 1:Enable */
/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */
/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
#define _USE_LABEL 0 /* 0:Disable or 1:Enable */
/* To enable volume label functions, set _USE_LAVEL to 1 */
#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */
/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
/*---------------------------------------------------------------------------/
/ Locale and Namespace Configurations
/----------------------------------------------------------------------------*/
#define _CODE_PAGE (MICROPY_LFN_CODE_PAGE)
/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
/ Incorrect setting of the code page can cause a file open failure.
/
/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows)
/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
/ 949 - Korean (DBCS, OEM, Windows)
/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
/ 1250 - Central Europe (Windows)
/ 1251 - Cyrillic (Windows)
/ 1252 - Latin 1 (Windows)
/ 1253 - Greek (Windows)
/ 1254 - Turkish (Windows)
/ 1255 - Hebrew (Windows)
/ 1256 - Arabic (Windows)
/ 1257 - Baltic (Windows)
/ 1258 - Vietnam (OEM, Windows)
/ 437 - U.S. (OEM)
/ 720 - Arabic (OEM)
/ 737 - Greek (OEM)
/ 775 - Baltic (OEM)
/ 850 - Multilingual Latin 1 (OEM)
/ 858 - Multilingual Latin 1 + Euro (OEM)
/ 852 - Latin 2 (OEM)
/ 855 - Cyrillic (OEM)
/ 866 - Russian (OEM)
/ 857 - Turkish (OEM)
/ 862 - Hebrew (OEM)
/ 874 - Thai (OEM, Windows)
/ 1 - ASCII (Valid for only non-LFN cfg.)
*/
#define _USE_LFN (MICROPY_ENABLE_LFN) /* 0 to 3 */
#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
/* The _USE_LFN option switches the LFN feature.
/
/ 0: Disable LFN feature. _MAX_LFN has no effect.
/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
/ 2: Enable LFN with dynamic working buffer on the STACK.
/ 3: Enable LFN with dynamic working buffer on the HEAP.
/
/ To enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
/ function must be added to the project.
/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
/ working buffer, take care on stack overflow. When use heap memory for the working
/ buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
/ to the project. */
#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
/* To switch the character encoding on the FatFs API to Unicode, enable LFN feature
/ and set _LFN_UNICODE to 1. */
#define _STRF_ENCODE 3 /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
/* When Unicode API is enabled, character encoding on the all FatFs API is switched
/ to Unicode. This option selects the character encoding on the file to be read/written
/ via string functions, f_gets(), f_putc(), f_puts and f_printf().
/ This option has no effect when _LFN_UNICODE is 0. */
#define _FS_RPATH 0 /* 0 to 2 */
/* The _FS_RPATH option configures relative path feature.
/
/ 0: Disable relative path feature and remove related functions.
/ 1: Enable relative path. f_chdrive() and f_chdir() function are available.
/ 2: f_getcwd() function is available in addition to 1.
/
/ Note that output of the f_readdir() fnction is affected by this option. */
/*---------------------------------------------------------------------------/
/ Drive/Volume Configurations
/----------------------------------------------------------------------------*/
#define _VOLUMES 2
/* Number of volumes (logical drives) to be used. */
#define _MULTI_PARTITION 1 /* 0:Single partition, 1:Enable multiple partition */
/* When set to 0, each volume is bound to the same physical drive number and
/ it can mount only first primaly partition. When it is set to 1, each volume
/ is tied to the partitions listed in VolToPart[]. */
#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */
/* Maximum sector size to be handled.
/ Always set 512 for memory card and hard disk but a larger value may be
/ required for on-board flash memory, floppy disk and optical disk.
/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size
/ and GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
#define _USE_ERASE 0 /* 0:Disable or 1:Enable */
/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
/ should be added to the disk_ioctl() function. */
#define _FS_NOFSINFO 0 /* 0 or 1 */
/* If you need to know the correct free space on the FAT32 volume, set this
/ option to 1 and f_getfree() function at first time after volume mount will
/ force a full FAT scan.
/
/ 0: Load all informations in the FSINFO if available.
/ 1: Do not trust free cluster count in the FSINFO.
*/
/*---------------------------------------------------------------------------/
/ System Configurations
/----------------------------------------------------------------------------*/
#define _WORD_ACCESS 0 /* 0 or 1 */
/* The _WORD_ACCESS option is an only platform dependent option. It defines
/ which access method is used to the word data on the FAT volume.
/
/ 0: Byte-by-byte access. Always compatible with all platforms.
/ 1: Word access. Do not choose this unless under both the following conditions.
/
/ * Byte order on the memory is little-endian.
/ * Address miss-aligned word access is always allowed for all instructions.
/
/ If it is the case, _WORD_ACCESS can also be set to 1 to improve performance
/ and reduce code size.
*/
/* A header file that defines sync object types on the O/S, such as
/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */
#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */
#define _SYNC_t HANDLE /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
/
/ 0: Disable re-entrancy. _SYNC_t and _FS_TIMEOUT have no effect.
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
/ function must be added to the project. */
#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */
/* To enable file lock control feature, set _FS_LOCK to 1 or greater.
The value defines how many files can be opened simultaneously. */
#endif /* _FFCONFIG */