micropython/ports/rp2/boards/deploy.md

### Flashing via UF2 bootloader

To get the board in bootloader mode ready for the firmware update, execute
`machine.bootloader()` at the MicroPython REPL.  Alternatively, hold
down the BOOTSEL button while plugging the board into USB.  The uf2 file below
should then be copied to the USB mass storage device that appears.  Once
programming of the new firmware is complete the device will automatically reset
and be ready for use.
ports: Add board.json for all boards. This will be used by https://micropython.org/download/ to generate the full listing of boards and firmware files. Optionally supports a board.md for additional customisation of the download page, as well as deploy.md for flashing instructions. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2021-09-01 14:08:30 +00:00			`### Flashing via UF2 bootloader`

			`To get the board in bootloader mode ready for the firmware update, execute`
			`machine.bootloader()` at the MicroPython REPL. Alternatively, hold
			`down the BOOTSEL button while plugging the board into USB. The uf2 file below`
			`should then be copied to the USB mass storage device that appears. Once`
			`programming of the new firmware is complete the device will automatically reset`
			`and be ready for use.`