3.3 KiB

Czysty Wina Historia

fastbuild - Pull and build Pyboard firmware under Linux

These scripts are intended to speed and simplify rebuilding firmware from source notably where pyboards of different types are in use, or when frozen bytecode necessitates repeated compilation and deployment. In particular buildpyb will detect the attached Pyboard type, build the appropriate firmware, put the board into DFU mode and deploy it, before launching rshell. The latter step may be removed if rshell is not in use.

The scripts should be run as your normal user and can proceed without user interaction.

Includes udev rules to avoid jumps from /dev/ttyACM0 to /dev/ttyACM1 and ensuring Pyboards of all types appear as /dev/pyboard. Rules are also offered for USB connected WiPy (V1.0) and FTDI USB/serial adaptors.

These scripts use Python scripts pyb_boot to put the Pyboard into DFU mode and pyb_check to determine the type of attached board. These use the pyboard.py module in the source tree to execute scripts on the attached board.

Main README

Optional Edits

In the buildpyb script you may wish to edit the -j 8 argument to make. This radically speeds build on a multi core PC. Empirically 8 gave the fastest build on my Core i7 4/8 core laptop: adjust to suit your PC. You may also want to remove the call to rshell if you don't plan on using it.

This script defaults to a frozen modules directory stmhal/modules. This may be overridden by creating an environment variable FROZEN_DIR: a recent update enabled the directory for frozen to be located anywhere in the filesystem, allowing project specific directories.

In buildnew you may wish to delete the unix make commands.

Dependencies and setup (on PC)

Python3
The following Bash code installs pyserial, copies 49-micropython.rules to (on most distros) /etc/udev/rules.d. It installs rshell if you plan to use it (recommended).

As root:

apt-get install python3-serial
pip install pyserial
cp 49-micropython.rules /etc/udev/rules.d
pip3 install rshell

Verify that pyboard.py works. To do this, close and restart the terminal session. Run Python3, paste the following and check that the red LED lights:

import os
mp = os.getenv('MPDIR')
sys.path.append(''.join((mp, '/tools')))
import pyboard
pyb = pyboard.Pyboard('/dev/pyboard')
pyb.enter_raw_repl()
pyb.exec('pyb.LED(1).on()')
pyb.exit_raw_repl()

The build scripts expect an environment variable MPDIR holding the path to the MicroPython source tree. To set this up, as normal user issue (edited for your path to the MicroPython source tree):

cd ~
echo export MPDIR='/mnt/qnap2/data/Projects/MicroPython/micropython' >> .bashrc
echo >> .bashrc

Close and restart the terminal session before running the scripts.

Build script: `buildpyb`

This checks the attached pyboard. If it's a V1.0, V1.1 or Lite it builds the correct firmware and deploys it. Otherwise it produces an error message.

Optional argument --clean - if supplied does a make clean to delete all files produced by the previous build before proceeding.

Update source: `buildnew`

Report state of master branch, update sources and issue make clean for Pyboard variants and ESP8266. Builds cross compiler and unix port.

ESP8266 Build

buildesp A script to build and deploy ESP8266 firmware. Accepts optional --clean argument.

3.3 KiB Czysty Wina Historia