diff --git a/drivers/st7567s/st7567s.py b/drivers/st7567s/st7567s.py
new file mode 100644
index 0000000..7a2caf2
--- /dev/null
+++ b/drivers/st7567s/st7567s.py
@@ -0,0 +1,98 @@
+from micropython import const
+from gui.drivers.boolpalette import BoolPalette
+from time import sleep_ms
+import framebuf
+
+# LCD Commands definition
+CMD_DISPLAY_ON          = const(0xAF)
+CMD_DISPLAY_OFF         = const(0xAE)
+CMD_SET_START_LINE      = const(0x40)
+CMD_SET_PAGE            = const(0xB0)
+CMD_COLUMN_UPPER        = const(0x10)
+CMD_COLUMN_LOWER        = const(0x00)
+CMD_SET_ADC_NORMAL      = const(0xA0)
+CMD_SET_ADC_REVERSE     = const(0xA1)
+CMD_SET_COL_NORMAL      = const(0xC0)
+CMD_SET_COL_REVERSE     = const(0xC8)
+CMD_SET_DISPLAY_NORMAL  = const(0xA6)
+CMD_SET_DISPLAY_REVERSE = const(0xA7)
+CMD_SET_ALLPX_ON        = const(0xA5)
+CMD_SET_ALLPX_NORMAL    = const(0xA4)
+CMD_SET_BIAS_9          = const(0xA2)
+CMD_SET_BIAS_7          = const(0xA3)
+CMD_DISPLAY_RESET       = const(0xE2)
+CMD_NOP                 = const(0xE3)
+CMD_TEST                = const(0xF0)  # Exit this mode with CMD_NOP
+CMD_SET_POWER           = const(0x28)
+CMD_SET_RESISTOR_RATIO  = const(0x20)
+CMD_SET_VOLUME          = const(0x81)
+
+# Display parameters
+DISPLAY_W               = const(128)
+DISPLAY_H               = const(64)
+DISPLAY_CONTRAST        = const(0x1B)
+DISPLAY_RESISTOR_RATIO  = const(5)
+DISPLAY_POWER_MODE      = 7
+
+
+class ST7567(framebuf.FrameBuffer):
+    @staticmethod
+    def rgb(r, g, b):
+        return min((r + g + b) >> 7, 3)  # Greyscale in range 0 <= gs <= 3 
+
+    def __init__(self, width, height, i2c, addr=0x3F, external_vcc=False):
+        self.i2c          = i2c
+        self.addr         = addr
+        self.temp         = bytearray(2)
+        self.write_list   = [b"\x40", None]  # Co=0, D/C#=1
+        self.width        = width
+        self.height       = height
+        self.external_vcc = external_vcc
+        self.pages        = self.height // 8
+        self.buffer       = bytearray(self.pages * self.width)
+        mode = framebuf.MONO_VLSB
+        self.palette = BoolPalette(mode)  # Ensure color compatibility
+        super().__init__( self.buffer, self.width, self.height, framebuf.MONO_VLSB)
+        self.display_init()
+
+    def display_init(self):
+        self.write_cmd( CMD_DISPLAY_RESET )
+        sleep_ms(1)
+        for cmd in (
+            CMD_DISPLAY_OFF,                                  # Display off
+            CMD_SET_BIAS_9,                                   # Display drive voltage 1/9 bias
+            CMD_SET_ADC_NORMAL,                               # Normal SEG
+            CMD_SET_COL_REVERSE,                              # Commmon mode reverse direction
+            CMD_SET_RESISTOR_RATIO + DISPLAY_RESISTOR_RATIO,  # V5 R ratio
+            CMD_SET_VOLUME,                                   # Contrast
+            DISPLAY_CONTRAST,                                 # Contrast value
+            CMD_SET_POWER + DISPLAY_POWER_MODE):
+            self.write_cmd(cmd)
+
+        self.show()
+        self.write_cmd(CMD_DISPLAY_ON)
+
+    def set_contrast(self, value):
+        if (0x1 <= value <= 0x3f):
+            for cmd in ( CMD_SET_VOLUME, value ):
+                self.write_cmd(cmd)
+
+    def show(self):
+        for i in range(8):
+            for cmd in (
+                CMD_SET_START_LINE,
+                CMD_SET_PAGE + i,
+                CMD_COLUMN_UPPER,
+                    CMD_COLUMN_LOWER):
+                self.write_cmd(cmd)
+            self.write_data( self.buffer[i*128:(i+1)*128] )
+            
+    def write_cmd(self, cmd):
+        self.temp[0] = 0x80  # Co=1, D/C#=0
+        self.temp[1] = cmd
+        self.i2c.writeto( self.addr, self.temp)
+
+    def write_data(self, buf):
+        self.write_list[1] = buf
+        self.i2c.writevto( self.addr, self.write_list )
+
diff --git a/setup_examples/st7567_i2c_esp32.py b/setup_examples/st7567_i2c_esp32.py
new file mode 100644
index 0000000..28dbe16
--- /dev/null
+++ b/setup_examples/st7567_i2c_esp32.py
@@ -0,0 +1,13 @@
+from machine import Pin, SoftI2C
+import gc
+
+# *** Choose your color display driver here ***
+from drivers.st7567s.st7567s import ST7567 as SSD
+
+# ESP32 Pin assignment
+i2c = SoftI2C(scl=Pin(33), sda=Pin(32), freq=100000)
+
+lcd_width = 128
+lcd_height = 64
+gc.collect()  # Precaution before instantiating framebuf
+ssd = SSD(lcd_width, lcd_height, i2c)