diff --git a/drivers/st7567s/st7567s.py b/drivers/st7567s/st7567s.py
new file mode 100644
index 0000000..dbf6eba
--- /dev/null
+++ b/drivers/st7567s/st7567s.py
@@ -0,0 +1,97 @@
+from micropython import const
+from gui.drivers.boolpalette import BoolPalette
+from time import sleep_ms
+import framebuf
+
+# LCD Commands definition
+_CMD_DISPLAY_ON = const(0xAF)
+_CMD_DISPLAY_OFF = const(0xAE)
+_CMD_SET_START_LINE = const(0x40)
+_CMD_SET_PAGE = const(0xB0)
+_CMD_COLUMN_UPPER = const(0x10)
+_CMD_COLUMN_LOWER = const(0x00)
+_CMD_SET_ADC_NORMAL = const(0xA0)
+_CMD_SET_ADC_REVERSE = const(0xA1)
+_CMD_SET_COL_NORMAL = const(0xC0)
+_CMD_SET_COL_REVERSE = const(0xC8)
+_CMD_SET_DISPLAY_NORMAL = const(0xA6)
+_CMD_SET_DISPLAY_REVERSE = const(0xA7)
+_CMD_SET_ALLPX_ON = const(0xA5)
+_CMD_SET_ALLPX_NORMAL = const(0xA4)
+_CMD_SET_BIAS_9 = const(0xA2)
+_CMD_SET_BIAS_7 = const(0xA3)
+_CMD_DISPLAY_RESET = const(0xE2)
+_CMD_NOP = const(0xE3)
+_CMD_TEST = const(0xF0)  # Exit this mode with _CMD_NOP
+_CMD_SET_POWER = const(0x28)
+_CMD_SET_RESISTOR_RATIO = const(0x20)
+_CMD_SET_VOLUME = const(0x81)
+
+# Display parameters
+_DISPLAY_W = const(128)
+_DISPLAY_H = const(64)
+_DISPLAY_CONTRAST = const(0x1B)
+_DISPLAY_RESISTOR_RATIO = const(5)
+_DISPLAY_POWER_MODE = 7
+
+
+class ST7567(framebuf.FrameBuffer):
+    @staticmethod
+    def rgb(r, g, b):
+        return min((r + g + b) >> 7, 3)  # Greyscale in range 0 <= gs <= 3 
+
+    def __init__(self, width, height, i2c, addr=0x3F, external_vcc=False):
+        self.i2c = i2c
+        self.addr = addr
+        self.temp = bytearray(2)
+        self.write_list = [b"\x40", None]  # Co=0, D/C#=1
+        self.width = width
+        self.height = height
+        self.external_vcc = external_vcc
+        self.pages = self.height // 8
+        self.buffer = bytearray(self.pages * self.width)
+        mode = framebuf.MONO_VLSB
+        self.palette = BoolPalette(mode)  # Ensure color compatibility
+        super().__init__(self.buffer, self.width, self.height, framebuf.MONO_VLSB)
+        self.display_init()
+
+    def display_init(self):
+        self.write_cmd(_CMD_DISPLAY_RESET)
+        sleep_ms(1)
+        for cmd in (
+                _CMD_DISPLAY_OFF,  # Display off
+                _CMD_SET_BIAS_9,  # Display drive voltage 1/9 bias
+                _CMD_SET_ADC_NORMAL,  # Normal SEG
+                _CMD_SET_COL_REVERSE,  # Commmon mode reverse direction
+                _CMD_SET_RESISTOR_RATIO + _DISPLAY_RESISTOR_RATIO,  # V5 R ratio
+                _CMD_SET_VOLUME,  # Contrast
+                _DISPLAY_CONTRAST,  # Contrast value
+                _CMD_SET_POWER + _DISPLAY_POWER_MODE):
+            self.write_cmd(cmd)
+
+        self.show()
+        self.write_cmd(_CMD_DISPLAY_ON)
+
+    def set_contrast(self, value):
+        if (0x1 <= value <= 0x3f):
+            for cmd in (_CMD_SET_VOLUME, value):
+                self.write_cmd(cmd)
+
+    def show(self):
+        for i in range(8):
+            for cmd in (
+                    _CMD_SET_START_LINE,
+                    _CMD_SET_PAGE + i,
+                    _CMD_COLUMN_UPPER,
+                    _CMD_COLUMN_LOWER):
+                self.write_cmd(cmd)
+            self.write_data(self.buffer[i * 128:(i + 1) * 128])
+
+    def write_cmd(self, cmd):
+        self.temp[0] = 0x80  # Co=1, D/C#=0
+        self.temp[1] = cmd
+        self.i2c.writeto(self.addr, self.temp)
+
+    def write_data(self, buf):
+        self.write_list[1] = buf
+        self.i2c.writevto(self.addr, self.write_list)
diff --git a/setup_examples/st7567_i2c_esp32.py b/setup_examples/st7567_i2c_esp32.py
new file mode 100644
index 0000000..28dbe16
--- /dev/null
+++ b/setup_examples/st7567_i2c_esp32.py
@@ -0,0 +1,13 @@
+from machine import Pin, SoftI2C
+import gc
+
+# *** Choose your color display driver here ***
+from drivers.st7567s.st7567s import ST7567 as SSD
+
+# ESP32 Pin assignment
+i2c = SoftI2C(scl=Pin(33), sda=Pin(32), freq=100000)
+
+lcd_width = 128
+lcd_height = 64
+gc.collect()  # Precaution before instantiating framebuf
+ssd = SSD(lcd_width, lcd_height, i2c)