kopia lustrzana https://github.com/peterhinch/micropython-micro-gui
34 wiersze
1.4 KiB
Python
34 wiersze
1.4 KiB
Python
# ili9341_FeatherS3.py Customise for your hardware config
|
|
|
|
# Released under the MIT License (MIT). See LICENSE.
|
|
# Copyright (c) 2023 Peter Hinch
|
|
|
|
# As written, supports:
|
|
# ili9486 320x480 displays on ESP32-S3 FeatherS3 board.
|
|
|
|
|
|
from machine import Pin, SPI
|
|
import gc
|
|
|
|
from drivers.ili94xx.ili9486 import ILI9486 as SSD
|
|
# Create and export an SSD instance
|
|
pdc = Pin(17, Pin.OUT, value=0) # Arbitrary pins borrowed from st7735r_esp32.py
|
|
prst = Pin(18, Pin.OUT, value=1)
|
|
pcs = Pin(14, Pin.OUT, value=1)
|
|
gc.collect() # Precaution before instantiating framebuf
|
|
spi = SPI(1, 30_000_000, sck=Pin(36), mosi=Pin(35), miso=Pin(37)) # No need to wire MISO.
|
|
gc.collect() # Precaution before instantiating framebuf
|
|
ssd = SSD(spi, cs=pcs, dc=pdc, rst=prst)
|
|
from gui.core.ugui import Display, Screen # Must perform this import after instantiating SSD (see other examples)
|
|
gc.collect() # Precaution before instantiating framebuf
|
|
|
|
# Create and export a Display instance
|
|
# Define control buttons
|
|
nxt = Pin(8, Pin.IN, Pin.PULL_UP) # Move to next control
|
|
sel = Pin(33, Pin.IN, Pin.PULL_UP) # Operate current control
|
|
prev = Pin(9, Pin.IN, Pin.PULL_UP) # Move to previous control
|
|
increase = Pin(38, Pin.IN, Pin.PULL_UP) # Increase control's value
|
|
decrease = Pin(1, Pin.IN, Pin.PULL_UP) # Decrease control's value
|
|
display = Display(ssd, nxt, sel, prev, increase, decrease, 4)
|
|
Screen.do_gc = False
|