diff --git a/hardware_setup.py b/hardware_setup.py
index 02cf963..21ba6ed 100644
--- a/hardware_setup.py
+++ b/hardware_setup.py
@@ -1,56 +1,40 @@
-# ili9341_pico.py Customise for your hardware config
+# hardware_setup.py Customise for your hardware config
 
 # Released under the MIT License (MIT). See LICENSE.
-# Copyright (c) 2021 Peter Hinch
+# Copyright (c) 2021 Peter Hinch, Ihor Nehrutsa
 
-# As written, supports:
-# ili9341 240x320 displays on Pi Pico
-# Edit the driver import for other displays.
+# Supports:
+# Waveshare Pico LCD 1.14" 135*240(Pixel) based on ST7789V
+# https://www.waveshare.com/wiki/Pico-LCD-1.14
+# https://www.waveshare.com/pico-lcd-1.14.htm
 
-# Demo of initialisation procedure designed to minimise risk of memory fail
-# when instantiating the frame buffer. The aim is to do this as early as
-# possible before importing other modules.
-
-# WIRING
-# Pico      Display
-# GPIO Pin
-# 3v3  36   Vin
-# IO6   9   CLK  Hardware SPI0
-# IO7  10   DATA (AKA SI MOSI)
-# IO8  11   DC
-# IO9  12   Rst
-# Gnd  13   Gnd
-# IO10 14   CS
-
-# Pushbuttons are wired between the pin and Gnd
-# Pico pin  Meaning
-# 16        Operate current control
-# 17        Decrease value of current control
-# 18        Select previous control
-# 19        Select next control
-# 20        Increase value of current control
-
-from machine import Pin, SPI, freq
+from machine import Pin, SPI
 import gc
+from drivers.st7789.st7789_4bit import *
+SSD = ST7789
+
+mode = LANDSCAPE  # Options PORTRAIT, USD, REFLECT combined with |
 
-from drivers.ili93xx.ili9341 import ILI9341 as SSD
-freq(250_000_000)  # RP2 overclock
-# Create and export an SSD instance
-pdc = Pin(8, Pin.OUT, value=0)  # Arbitrary pins
-prst = Pin(9, Pin.OUT, value=1)
-pcs = Pin(10, Pin.OUT, value=1)
-spi = SPI(0, baudrate=30_000_000)
 gc.collect()  # Precaution before instantiating framebuf
-ssd = SSD(spi, pcs, pdc, prst, usd=True)
+# Conservative low baudrate. Can go to 62.5MHz.
+spi = SPI(1, 30_000_000, sck=Pin(10), mosi=Pin(11), miso=None)
+pcs = Pin(9, Pin.OUT, value=1)
+prst = Pin(12, Pin.OUT, value=1)
+pbl = Pin(13, Pin.OUT, value=1)
+pdc = Pin(8, Pin.OUT, value=0)
+
+portrait = mode & PORTRAIT
+ht, wd = (240, 135) if portrait else (135, 240)
+ssd = SSD(spi, height=ht, width=wd, dc=pdc, cs=pcs, rst=prst, disp_mode=mode, display=TDISPLAY)
 
-from gui.core.ugui import Display, quiet
-# quiet()
 # Create and export a Display instance
-# Define control buttons
-nxt = Pin(19, Pin.IN, Pin.PULL_UP)  # Move to next control
-sel = Pin(16, Pin.IN, Pin.PULL_UP)  # Operate current control
-prev = Pin(18, Pin.IN, Pin.PULL_UP)  # Move to previous control
-increase = Pin(20, Pin.IN, Pin.PULL_UP)  # Increase control's value
-decrease = Pin(17, Pin.IN, Pin.PULL_UP)  # Decrease control's value
-# display = Display(ssd, nxt, sel, prev)  # 3-button mode
-display = Display(ssd, nxt, sel, prev, increase, decrease, 4)  # Encoder mode
+from gui.core.ugui import Display
+# Define control buttons: adjust joystick orientation to match display
+# Orientation is only correct for basic LANDSCAPE and PORTRAIT modes
+pnxt, pprev, pin, pdec = (2, 18, 16, 20) if portrait else (20, 16, 2, 18)
+nxt = Pin(pnxt, Pin.IN, Pin.PULL_UP)  # Move to next control
+sel = Pin(3, Pin.IN, Pin.PULL_UP)  # Operate current control
+prev = Pin(pprev, Pin.IN, Pin.PULL_UP)  # Move to previous control
+increase = Pin(pin, Pin.IN, Pin.PULL_UP)  # Increase control's value
+decrease = Pin(pdec, Pin.IN, Pin.PULL_UP)  # Decrease control's value
+display = Display(ssd, nxt, sel, prev, increase, decrease)
diff --git a/images/debug/foo.py_working.png b/images/debug/foo.py_working.png
new file mode 100644
index 0000000..2a1593b
Binary files /dev/null and b/images/debug/foo.py_working.png differ