kopia lustrzana https://github.com/micropython/micropython-lib
48 wiersze
1.6 KiB
Python
48 wiersze
1.6 KiB
Python
# MicroPython USB CDC REPL example
|
|
#
|
|
# Example demonstrating how to use os.dupterm() to provide the
|
|
# MicroPython REPL on a dynamic CDCInterface() serial port.
|
|
#
|
|
# To run this example:
|
|
#
|
|
# 1. Make sure `usb-device-cdc` is installed via: mpremote mip install usb-device-cdc
|
|
#
|
|
# 2. Run the example via: mpremote run cdc_repl_example.py
|
|
#
|
|
# 3. mpremote will exit with an error after the previous step, because when the
|
|
# example runs the existing USB device disconnects and then re-enumerates with
|
|
# the second serial port. If you check (for example by running mpremote connect
|
|
# list) then you should now see two USB serial devices.
|
|
#
|
|
# 4. Connect to one of the new ports: mpremote connect PORTNAME
|
|
#
|
|
# It may be necessary to type Ctrl-B to exit the raw REPL mode and resume the
|
|
# interactive REPL after mpremote connects.
|
|
#
|
|
# MIT license; Copyright (c) 2023-2024 Angus Gratton
|
|
import os
|
|
import time
|
|
import usb.device
|
|
from usb.device.cdc import CDCInterface
|
|
|
|
cdc = CDCInterface()
|
|
cdc.init(timeout=0) # zero timeout makes this non-blocking, suitable for os.dupterm()
|
|
|
|
# pass builtin_driver=True so that we get the built-in USB-CDC alongside,
|
|
# if it's available.
|
|
usb.device.get().init(cdc, builtin_driver=True)
|
|
|
|
print("Waiting for USB host to configure the interface...")
|
|
|
|
# wait for host enumerate as a CDC device...
|
|
while not cdc.is_open():
|
|
time.sleep_ms(100)
|
|
|
|
# Note: This example doesn't wait for the host to access the new CDC port,
|
|
# which could be done by polling cdc.dtr, as this will block the REPL
|
|
# from resuming while this code is still executing.
|
|
|
|
print("CDC port enumerated, duplicating REPL...")
|
|
|
|
old_term = os.dupterm(cdc)
|