MicroPython now supplies SSL/TLS functionality in a new built-in `tls`
module. The `ssl` module is now implemented purely in Python, in this
repository. Other libraries are updated to work with this scheme.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
There don't seem to be any MQTT implementations that expect an empty
username (instead of the field missing), so the check for unused `user` can
be simplified.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
Allows modifying current line, adding/deleting characters in the middle
etc. Includes home/end keys to move to start/end of current line.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
This is the last remaining use of the "options" feature. Nothing in the
main repo which `require()`'s this package sets it.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Add config for [tool.ruff.format] to pyproject.toml.
- Update pre-commit to run both ruff and ruff-format.
- Update a small number of files that change with ruff's rules.
- Update CI.
- Simplify codeformat.py just forward directly to "ruff format"
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Previously a BufferedCharacteristic could only be read by the client, where
it should have been writeable. This makes it support all ops (read / write
/ write-with-response, etc).
Adds a test to check the max_len and append functionality of
BufferedCharacteristic.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
In micropython/micropython#11239 we added support for passing data to
gatts_indicate (to make it match gatts_notify).
This adds the same to aioble.
Also update the documentation to mention this (and fix some mistakes and
add a few more examples).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- If no reset pin was set, calling standby() in the constructor
would enable the TCXO (XOSC) before the timeout was correctly set.
- This manifested as a BUSY timeout on the STM32WL5, first time after power
on reset.
- Clean up the general handling of BUSY timeouts, but also add some safety
margin to the base timeout just in case (not an issue, is only a stop-gap
to prevent the modem blocking indefinitely.)
Signed-off-by: Angus Gratton <angus@redyak.com.au>
For unknown reason, power output in this configuration is lower than it
should be (including when compared to the STM32Cube C libraries running on
the same board.
Suspect either the Nucleo board antenna switch or the power amplifier
registers are being set wrong, but the actual root cause remains elusive...
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Support depends on hardware support in MicroPython.
Also includes some tweaks in the SX126x base class, to deal with slightly
different platform configuration on STM32WL55, longer timeouts, tx_ant
options, etc.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
As-written this code is unreachable (return statement two line above),
so this change is really just to make the linter happy.
Found by Ruff checking F821.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Looks like copy-pasta from bmi270 driver.
There is a soft reset capability documented in the BMM150 datasheet, but it
uses different register bits and I don't have a BMM150 at hand to test it.
Found by Ruff checking F821.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
- For packages that were just x.y, update to x.y.0.
- For that were x.y.z-n, update to x.y.(z+1)
From now on we'll apply semver rules:
- MAJOR version when you make incompatible API changes
- MINOR version when you add functionality in a backward compatible manner
- PATCH version when you make backward compatible bug fixes
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This module implements a subset of the Python requests module, and so
it should have the same name.
Added a backwards-compatibility wrapper to allow people to continue to use
`import urequests`. This lives in micropython/urequests.
Changed requests to be a package, so that we can implement extension
packages in the future for optional functionality.
Added a basic README.md to both.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
f-strings aren't enabled on all builds (e.g. low-flash ESP8266).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Due to changes in MicroPython to support PEP-479, StopIteration has been
deprecated for return. This results in xmltok to raise RuntimeError every
time. This commit is a simple fix to just change from StopIteration to
EOFError and then return it in the generator.
For reading, the size is always terminated by a null, so just ignore it by
using 11 for the uctypes entry (this fixes a regression introduced in
7128d423c2).
For writing, the size must always be terminated by a null.
Signed-off-by: Damien George <damien@micropython.org>
Includes:
- component oriented driver, to only install the parts that are needed
- synchronous operation
- async wrapper class for asynchronous operation
- two examples with async & synchronous versions
- documentation
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This adds a utarfile-write extension package that adds the ability to
create and append to tar files.
Work done by Doug Ellis <dpwe@ee.columbia.edu>.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Removes the workaround for micropython/issues/6864.
Sets the default flags for discovered descriptors to be WRITE,
so that d.write() will implicitly set response=True.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is designed to be a common set of packages that all deployments with
networking support should include.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Adds missing "duration_ms" argument to the example, and a second example
that shows the "interval_us" / "window_us" and also active scan.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* Add instructions for how to use micropython-lib.
* Add a terminology guide and use consistent terminology
(package/module/library).
* Improve code conventions and contributor guidelines.
* Misc readme updates.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Use explicit pin numbers to instantiate the SPI interface on RP2.
On ESP32 use SoftSPI(...) rather than SPI(-1, ...).
Update terminology to initiator/responder.
Tested with two Pico boards.
Originally by @peterhinch.
See https://github.com/micropython/micropython/pull/6007 for discussion.
The summary is that on some cards (especially older Kingston ones) if the
bus is shared with other SPI devices, then it seems to require that MISO
is high for a few cycles before the transaction is initiated.
Because CS is high, this change should otherwise be a no-op.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Moves mip.py to mip/__init__.py, so that the optional (added in this
commit) mip/__main__.py can exist to support:
`micropython -m mip install [--target,--index,--no-mpy] package@version`
"install" works by forwarding the arguments directly to mip.install.
Updates mip to v0.2.0 because of the change in directory structure.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Duplicate Ctrl-C and LF detection requires this, but it was incorrectly
saving the current value, not the previous.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The regular REPL uses the uncooked input, but aiorepl reads from sys.stdin
which is cooked. The result is that if the client sends a CRLF, aiorepl
will see LFLF.
This ignores a second LF in quick succession from the first.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- `_FLAG_WRITE` was incorrectly `_FLAGS_WRITE`
- `response` should be defaulted to `None` rather than `False` in order
to detect that when it is unspecified.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This tool implements a subset of the ESP32 ROM bootloader protocol, and
it's mainly intended for updating Nina WiFi firmware from MicroPython, but
can be used to flash any ESP32 chip.
Check the machine module first, then search in previous places. This
supports having machine.dht_readinto as the new standard, while still being
backwards compatible.
This replaces the options that could be specified previously to include
and require.
The `aioble` package now provides everything. For a minimal install, the
individual components can now be installed or require()'ed explicitly.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
After `reconnect()`, MQTTClient.socket is blocking by default, and
check_msg() can block. This commit aims to fix that behaviour by
reimplementing `check_msg()` for umqtt.robust and setting the socket to
non-blocking.
Fixes issue #192.
Riffing on "pip", "mip installs packages".
This is a replacement for the previous `upip` tool for on-device
installation of packages.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This replaced the per-characteristic queues with a single shared queue,
which means that the characteristics will return from `written()` in the
exact order that the original writes arrived, even if the writes are
occuring across multiple different characteristics.
This work was funded by Planet Innovation.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This provides an async REPL with the following features:
- Run interactive REPL in the background.
- Execute statements using await.
- Simple history.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The `bluetooth` module replaced the def_handle field with end_handle
in the characteristic result IRQ. Use this when querying for
descriptors.
In the case where this is not available (older versions of micropython)
continue the existing behavior of searching just past the value handle,
although decrease this to +2 to avoid finding other characteristic's
descriptors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
With the dependencies captured in manifest.py, several packages in
python-stdlib were still unix-only due to direct or transitive dependencies
on unix-only or ffi modules. Or they just make no sense to run on
microcontroller targets.
In a few cases (e.g. base64) where possible, the unix dependency could be
removed.
Updates manifest.py to use the `unix_ffi=True` arg to `require()` for these
libraries.
Rename re-pcre to re now that unix-ffi is effectively its own namespace.
Update unix-ffi/README.md, and strengthen the wording that the unix
libraries are unmaintained.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Uses the new require()/package()/module() functions from manifestfile.py.
Add manifest.py for iperf3 and pyjwt.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is unmaintained and not the one installed by default on boards
(see github.com/micropython/micropython/blob/master/tools/upip.py).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Felix Dörre