From a5e2f3239c8023cf8d009fafa948d7f139cb87ff Mon Sep 17 00:00:00 2001 From: Jim Mussared Date: Tue, 6 Sep 2022 13:18:36 +1000 Subject: [PATCH] micropython/drivers: Move "ssd1306" display driver from main repo. Signed-off-by: Jim Mussared --- .../drivers/display/ssd1306/manifest.py | 1 + .../drivers/display/ssd1306/ssd1306.py | 163 ++++++++++++++++++ 2 files changed, 164 insertions(+) create mode 100644 micropython/drivers/display/ssd1306/manifest.py create mode 100644 micropython/drivers/display/ssd1306/ssd1306.py diff --git a/micropython/drivers/display/ssd1306/manifest.py b/micropython/drivers/display/ssd1306/manifest.py new file mode 100644 index 00000000..51580080 --- /dev/null +++ b/micropython/drivers/display/ssd1306/manifest.py @@ -0,0 +1 @@ +module("ssd1306.py", opt=3) diff --git a/micropython/drivers/display/ssd1306/ssd1306.py b/micropython/drivers/display/ssd1306/ssd1306.py new file mode 100644 index 00000000..a504cdad --- /dev/null +++ b/micropython/drivers/display/ssd1306/ssd1306.py @@ -0,0 +1,163 @@ +# MicroPython SSD1306 OLED driver, I2C and SPI interfaces + +from micropython import const +import framebuf + + +# register definitions +SET_CONTRAST = const(0x81) +SET_ENTIRE_ON = const(0xA4) +SET_NORM_INV = const(0xA6) +SET_DISP = const(0xAE) +SET_MEM_ADDR = const(0x20) +SET_COL_ADDR = const(0x21) +SET_PAGE_ADDR = const(0x22) +SET_DISP_START_LINE = const(0x40) +SET_SEG_REMAP = const(0xA0) +SET_MUX_RATIO = const(0xA8) +SET_IREF_SELECT = const(0xAD) +SET_COM_OUT_DIR = const(0xC0) +SET_DISP_OFFSET = const(0xD3) +SET_COM_PIN_CFG = const(0xDA) +SET_DISP_CLK_DIV = const(0xD5) +SET_PRECHARGE = const(0xD9) +SET_VCOM_DESEL = const(0xDB) +SET_CHARGE_PUMP = const(0x8D) + +# Subclassing FrameBuffer provides support for graphics primitives +# http://docs.micropython.org/en/latest/pyboard/library/framebuf.html +class SSD1306(framebuf.FrameBuffer): + def __init__(self, width, height, external_vcc): + self.width = width + self.height = height + self.external_vcc = external_vcc + self.pages = self.height // 8 + self.buffer = bytearray(self.pages * self.width) + super().__init__(self.buffer, self.width, self.height, framebuf.MONO_VLSB) + self.init_display() + + def init_display(self): + for cmd in ( + SET_DISP, # display off + # address setting + SET_MEM_ADDR, + 0x00, # horizontal + # resolution and layout + SET_DISP_START_LINE, # start at line 0 + SET_SEG_REMAP | 0x01, # column addr 127 mapped to SEG0 + SET_MUX_RATIO, + self.height - 1, + SET_COM_OUT_DIR | 0x08, # scan from COM[N] to COM0 + SET_DISP_OFFSET, + 0x00, + SET_COM_PIN_CFG, + 0x02 if self.width > 2 * self.height else 0x12, + # timing and driving scheme + SET_DISP_CLK_DIV, + 0x80, + SET_PRECHARGE, + 0x22 if self.external_vcc else 0xF1, + SET_VCOM_DESEL, + 0x30, # 0.83*Vcc + # display + SET_CONTRAST, + 0xFF, # maximum + SET_ENTIRE_ON, # output follows RAM contents + SET_NORM_INV, # not inverted + SET_IREF_SELECT, + 0x30, # enable internal IREF during display on + # charge pump + SET_CHARGE_PUMP, + 0x10 if self.external_vcc else 0x14, + SET_DISP | 0x01, # display on + ): # on + self.write_cmd(cmd) + self.fill(0) + self.show() + + def poweroff(self): + self.write_cmd(SET_DISP) + + def poweron(self): + self.write_cmd(SET_DISP | 0x01) + + def contrast(self, contrast): + self.write_cmd(SET_CONTRAST) + self.write_cmd(contrast) + + def invert(self, invert): + self.write_cmd(SET_NORM_INV | (invert & 1)) + + def rotate(self, rotate): + self.write_cmd(SET_COM_OUT_DIR | ((rotate & 1) << 3)) + self.write_cmd(SET_SEG_REMAP | (rotate & 1)) + + def show(self): + x0 = 0 + x1 = self.width - 1 + if self.width != 128: + # narrow displays use centred columns + col_offset = (128 - self.width) // 2 + x0 += col_offset + x1 += col_offset + self.write_cmd(SET_COL_ADDR) + self.write_cmd(x0) + self.write_cmd(x1) + self.write_cmd(SET_PAGE_ADDR) + self.write_cmd(0) + self.write_cmd(self.pages - 1) + self.write_data(self.buffer) + + +class SSD1306_I2C(SSD1306): + def __init__(self, width, height, i2c, addr=0x3C, external_vcc=False): + self.i2c = i2c + self.addr = addr + self.temp = bytearray(2) + self.write_list = [b"\x40", None] # Co=0, D/C#=1 + super().__init__(width, height, external_vcc) + + def write_cmd(self, cmd): + self.temp[0] = 0x80 # Co=1, D/C#=0 + self.temp[1] = cmd + self.i2c.writeto(self.addr, self.temp) + + def write_data(self, buf): + self.write_list[1] = buf + self.i2c.writevto(self.addr, self.write_list) + + +class SSD1306_SPI(SSD1306): + def __init__(self, width, height, spi, dc, res, cs, external_vcc=False): + self.rate = 10 * 1024 * 1024 + dc.init(dc.OUT, value=0) + res.init(res.OUT, value=0) + cs.init(cs.OUT, value=1) + self.spi = spi + self.dc = dc + self.res = res + self.cs = cs + import time + + self.res(1) + time.sleep_ms(1) + self.res(0) + time.sleep_ms(10) + self.res(1) + super().__init__(width, height, external_vcc) + + def write_cmd(self, cmd): + self.spi.init(baudrate=self.rate, polarity=0, phase=0) + self.cs(1) + self.dc(0) + self.cs(0) + self.spi.write(bytearray([cmd])) + self.cs(1) + + def write_data(self, buf): + self.spi.init(baudrate=self.rate, polarity=0, phase=0) + self.cs(1) + self.dc(1) + self.cs(0) + self.spi.write(buf) + self.cs(1)