kopia lustrzana https://github.com/meshtastic/protobufs
1019 wiersze
26 KiB
Protocol Buffer
1019 wiersze
26 KiB
Protocol Buffer
syntax = "proto3";
|
|
|
|
package meshtastic;
|
|
|
|
option csharp_namespace = "Meshtastic.Protobufs";
|
|
option go_package = "github.com/meshtastic/go/generated";
|
|
option java_outer_classname = "ConfigProtos";
|
|
option java_package = "com.geeksville.mesh";
|
|
option swift_prefix = "";
|
|
|
|
message Config {
|
|
/*
|
|
* Configuration
|
|
*/
|
|
message DeviceConfig {
|
|
/*
|
|
* Defines the device's role on the Mesh network
|
|
*/
|
|
enum Role {
|
|
/*
|
|
* Description: App connected or stand alone messaging device.
|
|
* Technical Details: Default Role
|
|
*/
|
|
CLIENT = 0;
|
|
/*
|
|
* Description: Device that does not forward packets from other devices.
|
|
*/
|
|
CLIENT_MUTE = 1;
|
|
|
|
/*
|
|
* Description: Infrastructure node for extending network coverage by relaying messages. Visible in Nodes list.
|
|
* Technical Details: Mesh packets will prefer to be routed over this node. This node will not be used by client apps.
|
|
* The wifi radio and the oled screen will be put to sleep.
|
|
* This mode may still potentially have higher power usage due to it's preference in message rebroadcasting on the mesh.
|
|
*/
|
|
ROUTER = 2;
|
|
|
|
/*
|
|
* Description: Combination of both ROUTER and CLIENT. Not for mobile devices.
|
|
*/
|
|
ROUTER_CLIENT = 3;
|
|
|
|
/*
|
|
* Description: Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in Nodes list.
|
|
* Technical Details: Mesh packets will simply be rebroadcasted over this node. Nodes configured with this role will not originate NodeInfo, Position, Telemetry
|
|
* or any other packet type. They will simply rebroadcast any mesh packets on the same frequency, channel num, spread factor, and coding rate.
|
|
*/
|
|
REPEATER = 4;
|
|
|
|
/*
|
|
* Description: Broadcasts GPS position packets as priority.
|
|
* Technical Details: Position Mesh packets will be prioritized higher and sent more frequently by default.
|
|
* When used in conjunction with power.is_power_saving = true, nodes will wake up,
|
|
* send position, and then sleep for position.position_broadcast_secs seconds.
|
|
*/
|
|
TRACKER = 5;
|
|
|
|
/*
|
|
* Description: Broadcasts telemetry packets as priority.
|
|
* Technical Details: Telemetry Mesh packets will be prioritized higher and sent more frequently by default.
|
|
* When used in conjunction with power.is_power_saving = true, nodes will wake up,
|
|
* send environment telemetry, and then sleep for telemetry.environment_update_interval seconds.
|
|
*/
|
|
SENSOR = 6;
|
|
|
|
/*
|
|
* Description: Optimized for ATAK system communication and reduces routine broadcasts.
|
|
* Technical Details: Used for nodes dedicated for connection to an ATAK EUD.
|
|
* Turns off many of the routine broadcasts to favor CoT packet stream
|
|
* from the Meshtastic ATAK plugin -> IMeshService -> Node
|
|
*/
|
|
TAK = 7;
|
|
|
|
/*
|
|
* Description: Device that only broadcasts as needed for stealth or power savings.
|
|
* Technical Details: Used for nodes that "only speak when spoken to"
|
|
* Turns all of the routine broadcasts but allows for ad-hoc communication
|
|
* Still rebroadcasts, but with local only rebroadcast mode (known meshes only)
|
|
* Can be used for clandestine operation or to dramatically reduce airtime / power consumption
|
|
*/
|
|
CLIENT_HIDDEN = 8;
|
|
|
|
/*
|
|
* Description: Broadcasts location as message to default channel regularly for to assist with device recovery.
|
|
* Technical Details: Used to automatically send a text message to the mesh
|
|
* with the current position of the device on a frequent interval:
|
|
* "I'm lost! Position: lat / long"
|
|
*/
|
|
LOST_AND_FOUND = 9;
|
|
|
|
/*
|
|
* Description: Enables automatic TAK PLI broadcasts and reduces routine broadcasts.
|
|
* Technical Details: Turns off many of the routine broadcasts to favor ATAK CoT packet stream
|
|
* and automatic TAK PLI (position location information) broadcasts.
|
|
* Uses position module configuration to determine TAK PLI broadcast interval.
|
|
*/
|
|
TAK_TRACKER = 10;
|
|
}
|
|
|
|
/*
|
|
* Defines the device's behavior for how messages are rebroadcast
|
|
*/
|
|
enum RebroadcastMode {
|
|
/*
|
|
* Default behavior.
|
|
* Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora params.
|
|
*/
|
|
ALL = 0;
|
|
|
|
/*
|
|
* Same as behavior as ALL but skips packet decoding and simply rebroadcasts them.
|
|
* Only available in Repeater role. Setting this on any other roles will result in ALL behavior.
|
|
*/
|
|
ALL_SKIP_DECODING = 1;
|
|
|
|
/*
|
|
* Ignores observed messages from foreign meshes that are open or those which it cannot decrypt.
|
|
* Only rebroadcasts message on the nodes local primary / secondary channels.
|
|
*/
|
|
LOCAL_ONLY = 2;
|
|
|
|
/*
|
|
* Ignores observed messages from foreign meshes like LOCAL_ONLY,
|
|
* but takes it step further by also ignoring messages from nodenums not in the node's known list (NodeDB)
|
|
*/
|
|
KNOWN_ONLY = 3;
|
|
}
|
|
|
|
/*
|
|
* Sets the role of node
|
|
*/
|
|
Role role = 1;
|
|
|
|
/*
|
|
* Disabling this will disable the SerialConsole by not initilizing the StreamAPI
|
|
*/
|
|
bool serial_enabled = 2;
|
|
|
|
/*
|
|
* By default we turn off logging as soon as an API client connects (to keep shared serial link quiet).
|
|
* Set this to true to leave the debug log outputting even when API is active.
|
|
*/
|
|
bool debug_log_enabled = 3;
|
|
|
|
/*
|
|
* For boards without a hard wired button, this is the pin number that will be used
|
|
* Boards that have more than one button can swap the function with this one. defaults to BUTTON_PIN if defined.
|
|
*/
|
|
uint32 button_gpio = 4;
|
|
|
|
/*
|
|
* For boards without a PWM buzzer, this is the pin number that will be used
|
|
* Defaults to PIN_BUZZER if defined.
|
|
*/
|
|
uint32 buzzer_gpio = 5;
|
|
|
|
/*
|
|
* Sets the role of node
|
|
*/
|
|
RebroadcastMode rebroadcast_mode = 6;
|
|
|
|
/*
|
|
* Send our nodeinfo this often
|
|
* Defaults to 900 Seconds (15 minutes)
|
|
*/
|
|
uint32 node_info_broadcast_secs = 7;
|
|
|
|
/*
|
|
* Treat double tap interrupt on supported accelerometers as a button press if set to true
|
|
*/
|
|
bool double_tap_as_button_press = 8;
|
|
|
|
/*
|
|
* If true, device is considered to be "managed" by a mesh administrator
|
|
* Clients should then limit available configuration and administrative options inside the user interface
|
|
*/
|
|
bool is_managed = 9;
|
|
|
|
/*
|
|
* Disables the triple-press of user button to enable or disable GPS
|
|
*/
|
|
bool disable_triple_click = 10;
|
|
|
|
/*
|
|
* POSIX Timezone definition string from https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv.
|
|
*/
|
|
string tzdef = 11;
|
|
|
|
/*
|
|
* If true, disable the default blinking LED (LED_PIN) behavior on the device
|
|
*/
|
|
bool led_heartbeat_disabled = 12;
|
|
}
|
|
|
|
/*
|
|
* Position Config
|
|
*/
|
|
message PositionConfig {
|
|
/*
|
|
* Bit field of boolean configuration options, indicating which optional
|
|
* fields to include when assembling POSITION messages.
|
|
* Longitude, latitude, altitude, speed, heading, and DOP
|
|
* are always included (also time if GPS-synced)
|
|
* NOTE: the more fields are included, the larger the message will be -
|
|
* leading to longer airtime and a higher risk of packet loss
|
|
*/
|
|
enum PositionFlags {
|
|
/*
|
|
* Required for compilation
|
|
*/
|
|
UNSET = 0x0000;
|
|
|
|
/*
|
|
* Include an altitude value (if available)
|
|
*/
|
|
ALTITUDE = 0x0001;
|
|
|
|
/*
|
|
* Altitude value is MSL
|
|
*/
|
|
ALTITUDE_MSL = 0x0002;
|
|
|
|
/*
|
|
* Include geoidal separation
|
|
*/
|
|
GEOIDAL_SEPARATION = 0x0004;
|
|
|
|
/*
|
|
* Include the DOP value ; PDOP used by default, see below
|
|
*/
|
|
DOP = 0x0008;
|
|
|
|
/*
|
|
* If POS_DOP set, send separate HDOP / VDOP values instead of PDOP
|
|
*/
|
|
HVDOP = 0x0010;
|
|
|
|
/*
|
|
* Include number of "satellites in view"
|
|
*/
|
|
SATINVIEW = 0x0020;
|
|
|
|
/*
|
|
* Include a sequence number incremented per packet
|
|
*/
|
|
SEQ_NO = 0x0040;
|
|
|
|
/*
|
|
* Include positional timestamp (from GPS solution)
|
|
*/
|
|
TIMESTAMP = 0x0080;
|
|
|
|
/*
|
|
* Include positional heading
|
|
* Intended for use with vehicle not walking speeds
|
|
* walking speeds are likely to be error prone like the compass
|
|
*/
|
|
HEADING = 0x0100;
|
|
|
|
/*
|
|
* Include positional speed
|
|
* Intended for use with vehicle not walking speeds
|
|
* walking speeds are likely to be error prone like the compass
|
|
*/
|
|
SPEED = 0x0200;
|
|
}
|
|
|
|
enum GpsMode {
|
|
/*
|
|
* GPS is present but disabled
|
|
*/
|
|
DISABLED = 0;
|
|
|
|
/*
|
|
* GPS is present and enabled
|
|
*/
|
|
ENABLED = 1;
|
|
|
|
/*
|
|
* GPS is not present on the device
|
|
*/
|
|
NOT_PRESENT = 2;
|
|
}
|
|
|
|
/*
|
|
* We should send our position this often (but only if it has changed significantly)
|
|
* Defaults to 15 minutes
|
|
*/
|
|
uint32 position_broadcast_secs = 1;
|
|
|
|
/*
|
|
* Adaptive position braoadcast, which is now the default.
|
|
*/
|
|
bool position_broadcast_smart_enabled = 2;
|
|
|
|
/*
|
|
* If set, this node is at a fixed position.
|
|
* We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
|
|
* The lat/lon/alt can be set by an internal GPS or with the help of the app.
|
|
*/
|
|
bool fixed_position = 3;
|
|
|
|
/*
|
|
* Is GPS enabled for this node?
|
|
*/
|
|
bool gps_enabled = 4 [deprecated = true];
|
|
|
|
/*
|
|
* How often should we try to get GPS position (in seconds)
|
|
* or zero for the default of once every 30 seconds
|
|
* or a very large value (maxint) to update only once at boot.
|
|
*/
|
|
uint32 gps_update_interval = 5;
|
|
|
|
/*
|
|
* Deprecated in favor of using smart / regular broadcast intervals as implicit attempt time
|
|
*/
|
|
uint32 gps_attempt_time = 6 [deprecated = true];
|
|
|
|
/*
|
|
* Bit field of boolean configuration options for POSITION messages
|
|
* (bitwise OR of PositionFlags)
|
|
*/
|
|
uint32 position_flags = 7;
|
|
|
|
/*
|
|
* (Re)define GPS_RX_PIN for your board.
|
|
*/
|
|
uint32 rx_gpio = 8;
|
|
|
|
/*
|
|
* (Re)define GPS_TX_PIN for your board.
|
|
*/
|
|
uint32 tx_gpio = 9;
|
|
|
|
/*
|
|
* The minimum distance in meters traveled (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled
|
|
*/
|
|
uint32 broadcast_smart_minimum_distance = 10;
|
|
|
|
/*
|
|
* The minimum number of seconds (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled
|
|
*/
|
|
uint32 broadcast_smart_minimum_interval_secs = 11;
|
|
|
|
/*
|
|
* (Re)define PIN_GPS_EN for your board.
|
|
*/
|
|
uint32 gps_en_gpio = 12;
|
|
|
|
/*
|
|
* Set where GPS is enabled, disabled, or not present
|
|
*/
|
|
GpsMode gps_mode = 13;
|
|
}
|
|
|
|
/*
|
|
* Power Config\
|
|
* See [Power Config](/docs/settings/config/power) for additional power config details.
|
|
*/
|
|
message PowerConfig {
|
|
/*
|
|
* Description: Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio.
|
|
* Don't use this setting if you want to use your device with the phone apps or are using a device without a user button.
|
|
* Technical Details: Works for ESP32 devices and NRF52 devices in the Sensor or Tracker roles
|
|
*/
|
|
bool is_power_saving = 1;
|
|
|
|
/*
|
|
* Description: If non-zero, the device will fully power off this many seconds after external power is removed.
|
|
*/
|
|
uint32 on_battery_shutdown_after_secs = 2;
|
|
|
|
/*
|
|
* Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
|
|
* Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
|
|
* https://meshtastic.org/docs/configuration/radio/power/#adc-multiplier-override
|
|
* Should be set to floating point value between 2 and 6
|
|
*/
|
|
float adc_multiplier_override = 3;
|
|
|
|
/*
|
|
* Description: The number of seconds for to wait before turning off BLE in No Bluetooth states
|
|
* Technical Details: ESP32 Only 0 for default of 1 minute
|
|
*/
|
|
uint32 wait_bluetooth_secs = 4;
|
|
|
|
/*
|
|
* Super Deep Sleep Seconds
|
|
* While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
|
|
* for this value (default 1 year) or a button press
|
|
* 0 for default of one year
|
|
*/
|
|
uint32 sds_secs = 6;
|
|
|
|
/*
|
|
* Description: In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
|
|
* Technical Details: ESP32 Only 0 for default of 300
|
|
*/
|
|
uint32 ls_secs = 7;
|
|
|
|
/*
|
|
* Description: While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
|
|
* Technical Details: ESP32 Only 0 for default of 10 seconds
|
|
*/
|
|
uint32 min_wake_secs = 8;
|
|
|
|
/*
|
|
* I2C address of INA_2XX to use for reading device battery voltage
|
|
*/
|
|
uint32 device_battery_ina_address = 9;
|
|
|
|
/*
|
|
* If non-zero, we want powermon log outputs. With the particular (bitfield) sources enabled.
|
|
* Note: we picked an ID of 32 so that lower more efficient IDs can be used for more frequently used options.
|
|
*/
|
|
uint64 powermon_enables = 32;
|
|
}
|
|
|
|
/*
|
|
* Network Config
|
|
*/
|
|
message NetworkConfig {
|
|
enum AddressMode {
|
|
/*
|
|
* obtain ip address via DHCP
|
|
*/
|
|
DHCP = 0;
|
|
|
|
/*
|
|
* use static ip address
|
|
*/
|
|
STATIC = 1;
|
|
}
|
|
|
|
message IpV4Config {
|
|
/*
|
|
* Static IP address
|
|
*/
|
|
fixed32 ip = 1;
|
|
|
|
/*
|
|
* Static gateway address
|
|
*/
|
|
fixed32 gateway = 2;
|
|
|
|
/*
|
|
* Static subnet mask
|
|
*/
|
|
fixed32 subnet = 3;
|
|
|
|
/*
|
|
* Static DNS server address
|
|
*/
|
|
fixed32 dns = 4;
|
|
}
|
|
|
|
/*
|
|
* Enable WiFi (disables Bluetooth)
|
|
*/
|
|
bool wifi_enabled = 1;
|
|
|
|
/*
|
|
* If set, this node will try to join the specified wifi network and
|
|
* acquire an address via DHCP
|
|
*/
|
|
string wifi_ssid = 3;
|
|
|
|
/*
|
|
* If set, will be use to authenticate to the named wifi
|
|
*/
|
|
string wifi_psk = 4;
|
|
|
|
/*
|
|
* NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org`
|
|
*/
|
|
string ntp_server = 5;
|
|
|
|
/*
|
|
* Enable Ethernet
|
|
*/
|
|
bool eth_enabled = 6;
|
|
|
|
/*
|
|
* acquire an address via DHCP or assign static
|
|
*/
|
|
AddressMode address_mode = 7;
|
|
|
|
/*
|
|
* struct to keep static address
|
|
*/
|
|
IpV4Config ipv4_config = 8;
|
|
|
|
/*
|
|
* rsyslog Server and Port
|
|
*/
|
|
string rsyslog_server = 9;
|
|
}
|
|
|
|
/*
|
|
* Display Config
|
|
*/
|
|
message DisplayConfig {
|
|
/*
|
|
* How the GPS coordinates are displayed on the OLED screen.
|
|
*/
|
|
enum GpsCoordinateFormat {
|
|
/*
|
|
* GPS coordinates are displayed in the normal decimal degrees format:
|
|
* DD.DDDDDD DDD.DDDDDD
|
|
*/
|
|
DEC = 0;
|
|
|
|
/*
|
|
* GPS coordinates are displayed in the degrees minutes seconds format:
|
|
* DD°MM'SS"C DDD°MM'SS"C, where C is the compass point representing the locations quadrant
|
|
*/
|
|
DMS = 1;
|
|
|
|
/*
|
|
* Universal Transverse Mercator format:
|
|
* ZZB EEEEEE NNNNNNN, where Z is zone, B is band, E is easting, N is northing
|
|
*/
|
|
UTM = 2;
|
|
|
|
/*
|
|
* Military Grid Reference System format:
|
|
* ZZB CD EEEEE NNNNN, where Z is zone, B is band, C is the east 100k square, D is the north 100k square,
|
|
* E is easting, N is northing
|
|
*/
|
|
MGRS = 3;
|
|
|
|
/*
|
|
* Open Location Code (aka Plus Codes).
|
|
*/
|
|
OLC = 4;
|
|
|
|
/*
|
|
* Ordnance Survey Grid Reference (the National Grid System of the UK).
|
|
* Format: AB EEEEE NNNNN, where A is the east 100k square, B is the north 100k square,
|
|
* E is the easting, N is the northing
|
|
*/
|
|
OSGR = 5;
|
|
}
|
|
|
|
/*
|
|
* Unit display preference
|
|
*/
|
|
enum DisplayUnits {
|
|
/*
|
|
* Metric (Default)
|
|
*/
|
|
METRIC = 0;
|
|
|
|
/*
|
|
* Imperial
|
|
*/
|
|
IMPERIAL = 1;
|
|
}
|
|
|
|
/*
|
|
* Override OLED outo detect with this if it fails.
|
|
*/
|
|
enum OledType {
|
|
/*
|
|
* Default / Auto
|
|
*/
|
|
OLED_AUTO = 0;
|
|
|
|
/*
|
|
* Default / Auto
|
|
*/
|
|
OLED_SSD1306 = 1;
|
|
|
|
/*
|
|
* Default / Auto
|
|
*/
|
|
OLED_SH1106 = 2;
|
|
|
|
/*
|
|
* Can not be auto detected but set by proto. Used for 128x128 screens
|
|
*/
|
|
OLED_SH1107 = 3;
|
|
}
|
|
|
|
/*
|
|
* Number of seconds the screen stays on after pressing the user button or receiving a message
|
|
* 0 for default of one minute MAXUINT for always on
|
|
*/
|
|
uint32 screen_on_secs = 1;
|
|
|
|
/*
|
|
* How the GPS coordinates are formatted on the OLED screen.
|
|
*/
|
|
GpsCoordinateFormat gps_format = 2;
|
|
|
|
/*
|
|
* Automatically toggles to the next page on the screen like a carousel, based the specified interval in seconds.
|
|
* Potentially useful for devices without user buttons.
|
|
*/
|
|
uint32 auto_screen_carousel_secs = 3;
|
|
|
|
/*
|
|
* If this is set, the displayed compass will always point north. if unset, the old behaviour
|
|
* (top of display is heading direction) is used.
|
|
*/
|
|
bool compass_north_top = 4;
|
|
|
|
/*
|
|
* Flip screen vertically, for cases that mount the screen upside down
|
|
*/
|
|
bool flip_screen = 5;
|
|
|
|
/*
|
|
* Perferred display units
|
|
*/
|
|
DisplayUnits units = 6;
|
|
|
|
/*
|
|
* Override auto-detect in screen
|
|
*/
|
|
OledType oled = 7;
|
|
|
|
enum DisplayMode {
|
|
/*
|
|
* Default. The old style for the 128x64 OLED screen
|
|
*/
|
|
DEFAULT = 0;
|
|
|
|
/*
|
|
* Rearrange display elements to cater for bicolor OLED displays
|
|
*/
|
|
TWOCOLOR = 1;
|
|
|
|
/*
|
|
* Same as TwoColor, but with inverted top bar. Not so good for Epaper displays
|
|
*/
|
|
INVERTED = 2;
|
|
|
|
/*
|
|
* TFT Full Color Displays (not implemented yet)
|
|
*/
|
|
COLOR = 3;
|
|
}
|
|
/*
|
|
* Display Mode
|
|
*/
|
|
DisplayMode displaymode = 8;
|
|
|
|
/*
|
|
* Print first line in pseudo-bold? FALSE is original style, TRUE is bold
|
|
*/
|
|
bool heading_bold = 9;
|
|
|
|
/*
|
|
* Should we wake the screen up on accelerometer detected motion or tap
|
|
*/
|
|
bool wake_on_tap_or_motion = 10;
|
|
|
|
enum CompassOrientation {
|
|
/*
|
|
* The compass and the display are in the same orientation.
|
|
*/
|
|
DEGREES_0 = 0;
|
|
|
|
/*
|
|
* Rotate the compass by 90 degrees.
|
|
*/
|
|
DEGREES_90 = 1;
|
|
|
|
/*
|
|
* Rotate the compass by 180 degrees.
|
|
*/
|
|
DEGREES_180 = 2;
|
|
|
|
/*
|
|
* Rotate the compass by 270 degrees.
|
|
*/
|
|
DEGREES_270 = 3;
|
|
|
|
/*
|
|
* Don't rotate the compass, but invert the result.
|
|
*/
|
|
DEGREES_0_INVERTED = 4;
|
|
|
|
/*
|
|
* Rotate the compass by 90 degrees and invert.
|
|
*/
|
|
DEGREES_90_INVERTED = 5;
|
|
|
|
/*
|
|
* Rotate the compass by 180 degrees and invert.
|
|
*/
|
|
DEGREES_180_INVERTED = 6;
|
|
|
|
/*
|
|
* Rotate the compass by 270 degrees and invert.
|
|
*/
|
|
DEGREES_270_INVERTED = 7;
|
|
}
|
|
|
|
/*
|
|
* Indicates how to rotate or invert the compass output to accurate display on the display.
|
|
*/
|
|
CompassOrientation compass_orientation = 11;
|
|
}
|
|
|
|
/*
|
|
* Lora Config
|
|
*/
|
|
message LoRaConfig {
|
|
enum RegionCode {
|
|
/*
|
|
* Region is not set
|
|
*/
|
|
UNSET = 0;
|
|
|
|
/*
|
|
* United States
|
|
*/
|
|
US = 1;
|
|
|
|
/*
|
|
* European Union 433mhz
|
|
*/
|
|
EU_433 = 2;
|
|
|
|
/*
|
|
* European Union 868mhz
|
|
*/
|
|
EU_868 = 3;
|
|
|
|
/*
|
|
* China
|
|
*/
|
|
CN = 4;
|
|
|
|
/*
|
|
* Japan
|
|
*/
|
|
JP = 5;
|
|
|
|
/*
|
|
* Australia / New Zealand
|
|
*/
|
|
ANZ = 6;
|
|
|
|
/*
|
|
* Korea
|
|
*/
|
|
KR = 7;
|
|
|
|
/*
|
|
* Taiwan
|
|
*/
|
|
TW = 8;
|
|
|
|
/*
|
|
* Russia
|
|
*/
|
|
RU = 9;
|
|
|
|
/*
|
|
* India
|
|
*/
|
|
IN = 10;
|
|
|
|
/*
|
|
* New Zealand 865mhz
|
|
*/
|
|
NZ_865 = 11;
|
|
|
|
/*
|
|
* Thailand
|
|
*/
|
|
TH = 12;
|
|
|
|
/*
|
|
* WLAN Band
|
|
*/
|
|
LORA_24 = 13;
|
|
|
|
/*
|
|
* Ukraine 433mhz
|
|
*/
|
|
UA_433 = 14;
|
|
|
|
/*
|
|
* Ukraine 868mhz
|
|
*/
|
|
UA_868 = 15;
|
|
|
|
/*
|
|
* Malaysia 433mhz
|
|
*/
|
|
MY_433 = 16;
|
|
|
|
/*
|
|
* Malaysia 919mhz
|
|
*/
|
|
MY_919 = 17;
|
|
|
|
/*
|
|
* Singapore 923mhz
|
|
*/
|
|
SG_923 = 18;
|
|
}
|
|
|
|
/*
|
|
* Standard predefined channel settings
|
|
* Note: these mappings must match ModemPreset Choice in the device code.
|
|
*/
|
|
enum ModemPreset {
|
|
/*
|
|
* Long Range - Fast
|
|
*/
|
|
LONG_FAST = 0;
|
|
|
|
/*
|
|
* Long Range - Slow
|
|
*/
|
|
LONG_SLOW = 1;
|
|
|
|
/*
|
|
* Very Long Range - Slow
|
|
*/
|
|
VERY_LONG_SLOW = 2;
|
|
|
|
/*
|
|
* Medium Range - Slow
|
|
*/
|
|
MEDIUM_SLOW = 3;
|
|
|
|
/*
|
|
* Medium Range - Fast
|
|
*/
|
|
MEDIUM_FAST = 4;
|
|
|
|
/*
|
|
* Short Range - Slow
|
|
*/
|
|
SHORT_SLOW = 5;
|
|
|
|
/*
|
|
* Short Range - Fast
|
|
*/
|
|
SHORT_FAST = 6;
|
|
|
|
/*
|
|
* Long Range - Moderately Fast
|
|
*/
|
|
LONG_MODERATE = 7;
|
|
}
|
|
|
|
/*
|
|
* When enabled, the `modem_preset` fields will be adhered to, else the `bandwidth`/`spread_factor`/`coding_rate`
|
|
* will be taked from their respective manually defined fields
|
|
*/
|
|
bool use_preset = 1;
|
|
|
|
/*
|
|
* Either modem_config or bandwidth/spreading/coding will be specified - NOT BOTH.
|
|
* As a heuristic: If bandwidth is specified, do not use modem_config.
|
|
* Because protobufs take ZERO space when the value is zero this works out nicely.
|
|
* This value is replaced by bandwidth/spread_factor/coding_rate.
|
|
* If you'd like to experiment with other options add them to MeshRadio.cpp in the device code.
|
|
*/
|
|
ModemPreset modem_preset = 2;
|
|
|
|
/*
|
|
* Bandwidth in MHz
|
|
* Certain bandwidth numbers are 'special' and will be converted to the
|
|
* appropriate floating point value: 31 -> 31.25MHz
|
|
*/
|
|
uint32 bandwidth = 3;
|
|
|
|
/*
|
|
* A number from 7 to 12.
|
|
* Indicates number of chirps per symbol as 1<<spread_factor.
|
|
*/
|
|
uint32 spread_factor = 4;
|
|
|
|
/*
|
|
* The denominator of the coding rate.
|
|
* ie for 4/5, the value is 5. 4/8 the value is 8.
|
|
*/
|
|
uint32 coding_rate = 5;
|
|
|
|
/*
|
|
* This parameter is for advanced users with advanced test equipment, we do not recommend most users use it.
|
|
* A frequency offset that is added to to the calculated band center frequency.
|
|
* Used to correct for crystal calibration errors.
|
|
*/
|
|
float frequency_offset = 6;
|
|
|
|
/*
|
|
* The region code for the radio (US, CN, EU433, etc...)
|
|
*/
|
|
RegionCode region = 7;
|
|
|
|
/*
|
|
* Maximum number of hops. This can't be greater than 7.
|
|
* Default of 3
|
|
* Attempting to set a value > 7 results in the default
|
|
*/
|
|
uint32 hop_limit = 8;
|
|
|
|
/*
|
|
* Disable TX from the LoRa radio. Useful for hot-swapping antennas and other tests.
|
|
* Defaults to false
|
|
*/
|
|
bool tx_enabled = 9;
|
|
|
|
/*
|
|
* If zero, then use default max legal continuous power (ie. something that won't
|
|
* burn out the radio hardware)
|
|
* In most cases you should use zero here.
|
|
* Units are in dBm.
|
|
*/
|
|
int32 tx_power = 10;
|
|
|
|
/*
|
|
* This controls the actual hardware frequency the radio transmits on.
|
|
* Most users should never need to be exposed to this field/concept.
|
|
* A channel number between 1 and NUM_CHANNELS (whatever the max is in the current region).
|
|
* If ZERO then the rule is "use the old channel name hash based
|
|
* algorithm to derive the channel number")
|
|
* If using the hash algorithm the channel number will be: hash(channel_name) %
|
|
* NUM_CHANNELS (Where num channels depends on the regulatory region).
|
|
*/
|
|
uint32 channel_num = 11;
|
|
|
|
/*
|
|
* If true, duty cycle limits will be exceeded and thus you're possibly not following
|
|
* the local regulations if you're not a HAM.
|
|
* Has no effect if the duty cycle of the used region is 100%.
|
|
*/
|
|
bool override_duty_cycle = 12;
|
|
|
|
/*
|
|
* If true, sets RX boosted gain mode on SX126X based radios
|
|
*/
|
|
bool sx126x_rx_boosted_gain = 13;
|
|
|
|
/*
|
|
* This parameter is for advanced users and licensed HAM radio operators.
|
|
* Ignore Channel Calculation and use this frequency instead. The frequency_offset
|
|
* will still be applied. This will allow you to use out-of-band frequencies.
|
|
* Please respect your local laws and regulations. If you are a HAM, make sure you
|
|
* enable HAM mode and turn off encryption.
|
|
*/
|
|
float override_frequency = 14;
|
|
|
|
/*
|
|
* For testing it is useful sometimes to force a node to never listen to
|
|
* particular other nodes (simulating radio out of range). All nodenums listed
|
|
* in ignore_incoming will have packets they send dropped on receive (by router.cpp)
|
|
*/
|
|
repeated uint32 ignore_incoming = 103;
|
|
|
|
/*
|
|
* If true, the device will not process any packets received via LoRa that passed via MQTT anywhere on the path towards it.
|
|
*/
|
|
bool ignore_mqtt = 104;
|
|
}
|
|
|
|
message BluetoothConfig {
|
|
enum PairingMode {
|
|
/*
|
|
* Device generates a random PIN that will be shown on the screen of the device for pairing
|
|
*/
|
|
RANDOM_PIN = 0;
|
|
|
|
/*
|
|
* Device requires a specified fixed PIN for pairing
|
|
*/
|
|
FIXED_PIN = 1;
|
|
|
|
/*
|
|
* Device requires no PIN for pairing
|
|
*/
|
|
NO_PIN = 2;
|
|
}
|
|
|
|
/*
|
|
* Enable Bluetooth on the device
|
|
*/
|
|
bool enabled = 1;
|
|
|
|
/*
|
|
* Determines the pairing strategy for the device
|
|
*/
|
|
PairingMode mode = 2;
|
|
|
|
/*
|
|
* Specified PIN for PairingMode.FixedPin
|
|
*/
|
|
uint32 fixed_pin = 3;
|
|
|
|
/*
|
|
* Enables device (serial style logs) over Bluetooth
|
|
*/
|
|
bool device_logging_enabled = 4;
|
|
}
|
|
|
|
/*
|
|
* Payload Variant
|
|
*/
|
|
oneof payload_variant {
|
|
DeviceConfig device = 1;
|
|
PositionConfig position = 2;
|
|
PowerConfig power = 3;
|
|
NetworkConfig network = 4;
|
|
DisplayConfig display = 5;
|
|
LoRaConfig lora = 6;
|
|
BluetoothConfig bluetooth = 7;
|
|
}
|
|
}
|