mirror
/
meshtastic-protobuf
kopia lustrzana https://github.com/meshtastic/protobufs
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
meshtastic-protobuf/meshtastic/mesh.proto

1475 wiersze
37 KiB
Protocol Buffer
Czysty Wina Historia

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

syntax = "proto3";
package meshtastic;
import "meshtastic/channel.proto";
import "meshtastic/config.proto";
import "meshtastic/module_config.proto";
import "meshtastic/portnums.proto";
import "meshtastic/telemetry.proto";
import "meshtastic/xmodem.proto";
option csharp_namespace = "Meshtastic.Protobufs";
option go_package = "github.com/meshtastic/go/generated";
option java_outer_classname = "MeshProtos";
option java_package = "com.geeksville.mesh";
option swift_prefix = "";
/*
* a gps position
*/
message Position {
/*
* The new preferred location encoding, multiply by 1e-7 to get degrees
* in floating point
*/
sfixed32 latitude_i = 1;
/*
* TODO: REPLACE
*/
sfixed32 longitude_i = 2;
/*
* In meters above MSL (but see issue #359)
*/
int32 altitude = 3;
/*
* This is usually not sent over the mesh (to save space), but it is sent
* from the phone so that the local device can set its RTC If it is sent over
* the mesh (because there are devices on the mesh without GPS), it will only
* be sent by devices which has a hardware GPS clock.
* seconds since 1970
*/
fixed32 time = 4;
/*
* How the location was acquired: manual, onboard GPS, external (EUD) GPS
*/
enum LocSource {
/*
* TODO: REPLACE
*/
LOC_UNSET = 0;
/*
* TODO: REPLACE
*/
LOC_MANUAL = 1;
/*
* TODO: REPLACE
*/
LOC_INTERNAL = 2;
/*
* TODO: REPLACE
*/
LOC_EXTERNAL = 3;
}
/*
* TODO: REPLACE
*/
LocSource location_source = 5;
/*
* How the altitude was acquired: manual, GPS int/ext, etc
* Default: same as location_source if present
*/
enum AltSource {
/*
* TODO: REPLACE
*/
ALT_UNSET = 0;
/*
* TODO: REPLACE
*/
ALT_MANUAL = 1;
/*
* TODO: REPLACE
*/
ALT_INTERNAL = 2;
/*
* TODO: REPLACE
*/
ALT_EXTERNAL = 3;
/*
* TODO: REPLACE
*/
ALT_BAROMETRIC = 4;
}
/*
* TODO: REPLACE
*/
AltSource altitude_source = 6;
/*
* Positional timestamp (actual timestamp of GPS solution) in integer epoch seconds
*/
fixed32 timestamp = 7;
/*
* Pos. timestamp milliseconds adjustment (rarely available or required)
*/
int32 timestamp_millis_adjust = 8;
/*
* HAE altitude in meters - can be used instead of MSL altitude
*/
sint32 altitude_hae = 9;
/*
* Geoidal separation in meters
*/
sint32 altitude_geoidal_separation = 10;
/*
* Horizontal, Vertical and Position Dilution of Precision, in 1/100 units
* - PDOP is sufficient for most cases
* - for higher precision scenarios, HDOP and VDOP can be used instead,
* in which case PDOP becomes redundant (PDOP=sqrt(HDOP^2 + VDOP^2))
* TODO: REMOVE/INTEGRATE
*/
uint32 PDOP = 11;
/*
* TODO: REPLACE
*/
uint32 HDOP = 12;
/*
* TODO: REPLACE
*/
uint32 VDOP = 13;
/*
* GPS accuracy (a hardware specific constant) in mm
* multiplied with DOP to calculate positional accuracy
* Default: "'bout three meters-ish" :)
*/
uint32 gps_accuracy = 14;
/*
* Ground speed in m/s and True North TRACK in 1/100 degrees
* Clarification of terms:
* - "track" is the direction of motion (measured in horizontal plane)
* - "heading" is where the fuselage points (measured in horizontal plane)
* - "yaw" indicates a relative rotation about the vertical axis
* TODO: REMOVE/INTEGRATE
*/
uint32 ground_speed = 15;
/*
* TODO: REPLACE
*/
uint32 ground_track = 16;
/*
* GPS fix quality (from NMEA GxGGA statement or similar)
*/
uint32 fix_quality = 17;
/*
* GPS fix type 2D/3D (from NMEA GxGSA statement)
*/
uint32 fix_type = 18;
/*
* GPS "Satellites in View" number
*/
uint32 sats_in_view = 19;
/*
* Sensor ID - in case multiple positioning sensors are being used
*/
uint32 sensor_id = 20;
/*
* Estimated/expected time (in seconds) until next update:
* - if we update at fixed intervals of X seconds, use X
* - if we update at dynamic intervals (based on relative movement etc),
* but "AT LEAST every Y seconds", use Y
*/
uint32 next_update = 21;
/*
* A sequence number, incremented with each Position message to help
* detect lost updates if needed
*/
uint32 seq_number = 22;
}
/*
* Note: these enum names must EXACTLY match the string used in the device
* bin/build-all.sh script.
* Because they will be used to find firmware filenames in the android app for OTA updates.
* To match the old style filenames, _ is converted to -, p is converted to .
*/
enum HardwareModel {
/*
* TODO: REPLACE
*/
UNSET = 0;
/*
* TODO: REPLACE
*/
TLORA_V2 = 1;
/*
* TODO: REPLACE
*/
TLORA_V1 = 2;
/*
* TODO: REPLACE
*/
TLORA_V2_1_1P6 = 3;
/*
* TODO: REPLACE
*/
TBEAM = 4;
/*
* The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
* (see HELTEC_V2 for the new version).
*/
HELTEC_V2_0 = 5;
/*
* TODO: REPLACE
*/
TBEAM_V0P7 = 6;
/*
* TODO: REPLACE
*/
T_ECHO = 7;
/*
* TODO: REPLACE
*/
TLORA_V1_1P3 = 8;
/*
* TODO: REPLACE
*/
RAK4631 = 9;
/*
* The new version of the heltec WiFi_Lora_32_V2 board that has battery sensing hooked to GPIO 37.
* Sadly they did not update anything on the silkscreen to identify this board
*/
HELTEC_V2_1 = 10;
/*
* Ancient heltec WiFi_Lora_32 board
*/
HELTEC_V1 = 11;
/*
* New T-BEAM with ESP32-S3 CPU
*/
LILYGO_TBEAM_S3_CORE = 12;
/*
* RAK WisBlock ESP32 core: https://docs.rakwireless.com/Product-Categories/WisBlock/RAK11200/Overview/
*/
RAK11200 = 13;
/*
* B&Q Consulting Nano Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:nano
*/
NANO_G1 = 14;
/*
* TODO: REPLACE
*/
TLORA_V2_1_1P8 = 15;
/*
* TODO: REPLACE
*/
TLORA_T3_S3 = 16;
/*
* B&Q Consulting Nano G1 Explorer: https://wiki.uniteng.com/en/meshtastic/nano-g1-explorer
*/
NANO_G1_EXPLORER = 17;
/*
* B&Q Consulting Nano G2 Ultra: https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra
*/
NANO_G2_ULTRA = 18;
/*
* LoRAType device: https://loratype.org/
*/
LORA_TYPE = 19;
/*
* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station
*/
STATION_G1 = 25;
/*
* RAK11310 (RP2040 + SX1262)
*/
RAK11310 = 26;
/*
* ---------------------------------------------------------------------------
* Less common/prototype boards listed here (needs one more byte over the air)
* ---------------------------------------------------------------------------
*/
LORA_RELAY_V1 = 32;
/*
* TODO: REPLACE
*/
NRF52840DK = 33;
/*
* TODO: REPLACE
*/
PPR = 34;
/*
* TODO: REPLACE
*/
GENIEBLOCKS = 35;
/*
* TODO: REPLACE
*/
NRF52_UNKNOWN = 36;
/*
* TODO: REPLACE
*/
PORTDUINO = 37;
/*
* The simulator built into the android app
*/
ANDROID_SIM = 38;
/*
* Custom DIY device based on @NanoVHF schematics: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/Schematics
*/
DIY_V1 = 39;
/*
* nRF52840 Dongle : https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle/
*/
NRF52840_PCA10059 = 40;
/*
* Custom Disaster Radio esp32 v3 device https://github.com/sudomesh/disaster-radio/tree/master/hardware/board_esp32_v3
*/
DR_DEV = 41;
/*
* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/
*/
M5STACK = 42;
/*
* New Heltec LoRA32 with ESP32-S3 CPU
*/
HELTEC_V3 = 43;
/*
* New Heltec Wireless Stick Lite with ESP32-S3 CPU
*/
HELTEC_WSL_V3 = 44;
/*
* New BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
*/
BETAFPV_2400_TX = 45;
/*
* BetaFPV ExpressLRS "Nano" TX Module 900MHz with ESP32 CPU
*/
BETAFPV_900_NANO_TX = 46;
/*
* Raspberry Pi Pico (W) with Waveshare SX1262 LoRa Node Module
*/
RPI_PICO = 47;
/*
* Heltec Wireless Tracker with ESP32-S3 CPU, built-in GPS, and TFT
*/
HELTEC_WIRELESS_TRACKER = 48;
/*
* Heltec Wireless Paper with ESP32-S3 CPU and E-Ink display
*/
HELTEC_WIRELESS_PAPER = 49;
/*
* LilyGo T-Deck with ESP32-S3 CPU, Keyboard and IPS display
*/
T_DECK = 50;
/*
* LilyGo T-Watch S3 with ESP32-S3 CPU and IPS display
*/
T_WATCH_S3 = 51;
/*
* Bobricius Picomputer with ESP32-S3 CPU, Keyboard and IPS display
*/
PICOMPUTER_S3 = 52;
/*
* ------------------------------------------------------------------------------------------------------------------------------------------
* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
* ------------------------------------------------------------------------------------------------------------------------------------------
*/
PRIVATE_HW = 255;
}
/*
* Broadcast when a newly powered mesh node wants to find a node num it can use
* Sent from the phone over bluetooth to set the user id for the owner of this node.
* Also sent from nodes to each other when a new node signs on (so all clients can have this info)
* The algorithm is as follows:
* when a node starts up, it broadcasts their user and the normal flow is for all
* other nodes to reply with their User as well (so the new node can build its nodedb)
* If a node ever receives a User (not just the first broadcast) message where
* the sender node number equals our node number, that indicates a collision has
* occurred and the following steps should happen:
* If the receiving node (that was already in the mesh)'s macaddr is LOWER than the
* new User who just tried to sign in: it gets to keep its nodenum.
* We send a broadcast message of OUR User (we use a broadcast so that the other node can
* receive our message, considering we have the same id - it also serves to let
* observers correct their nodedb) - this case is rare so it should be okay.
* If any node receives a User where the macaddr is GTE than their local macaddr,
* they have been vetoed and should pick a new random nodenum (filtering against
* whatever it knows about the nodedb) and rebroadcast their User.
* A few nodenums are reserved and will never be requested:
* 0xff - broadcast
* 0 through 3 - for future use
*/
message User {
/*
* A globally unique ID string for this user.
* In the case of Signal that would mean +16504442323, for the default macaddr derived id it would be !<8 hexidecimal bytes>.
* Note: app developers are encouraged to also use the following standard
* node IDs "^all" (for broadcast), "^local" (for the locally connected node)
*/
string id = 1;
/*
* A full name for this user, i.e. "Kevin Hester"
*/
string long_name = 2;
/*
* A VERY short name, ideally two characters.
* Suitable for a tiny OLED screen
*/
string short_name = 3;
/*
* Deprecated in Meshtastic 2.1.x
* This is the addr of the radio.
* Not populated by the phone, but added by the esp32 when broadcasting
*/
bytes macaddr = 4 [deprecated = true];
/*
* TBEAM, HELTEC, etc...
* Starting in 1.2.11 moved to hw_model enum in the NodeInfo object.
* Apps will still need the string here for older builds
* (so OTA update can find the right image), but if the enum is available it will be used instead.
*/
HardwareModel hw_model = 5;
/*
* In some regions Ham radio operators have different bandwidth limitations than others.
* If this user is a licensed operator, set this flag.
* Also, "long_name" should be their licence number.
*/
bool is_licensed = 6;
}
/*
* A message used in our Dynamic Source Routing protocol (RFC 4728 based)
*/
message RouteDiscovery {
/*
* The list of nodenums this packet has visited so far
*/
repeated fixed32 route = 1;
}
/*
* A Routing control Data packet handled by the routing module
*/
message Routing {
/*
* A failure in delivering a message (usually used for routing control messages, but might be provided in addition to ack.fail_id to provide
* details on the type of failure).
*/
enum Error {
/*
* This message is not a failure
*/
NONE = 0;
/*
* Our node doesn't have a route to the requested destination anymore.
*/
NO_ROUTE = 1;
/*
* We received a nak while trying to forward on your behalf
*/
GOT_NAK = 2;
/*
* TODO: REPLACE
*/
TIMEOUT = 3;
/*
* No suitable interface could be found for delivering this packet
*/
NO_INTERFACE = 4;
/*
* We reached the max retransmission count (typically for naive flood routing)
*/
MAX_RETRANSMIT = 5;
/*
* No suitable channel was found for sending this packet (i.e. was requested channel index disabled?)
*/
NO_CHANNEL = 6;
/*
* The packet was too big for sending (exceeds interface MTU after encoding)
*/
TOO_LARGE = 7;
/*
* The request had want_response set, the request reached the destination node, but no service on that node wants to send a response
* (possibly due to bad channel permissions)
*/
NO_RESPONSE = 8;
/*
* Cannot send currently because duty cycle regulations will be violated.
*/
DUTY_CYCLE_LIMIT = 9;
/*
* The application layer service on the remote node received your request, but considered your request somehow invalid
*/
BAD_REQUEST = 32;
/*
* The application layer service on the remote node received your request, but considered your request not authorized
* (i.e you did not send the request on the required bound channel)
*/
NOT_AUTHORIZED = 33;
}
oneof variant {
/*
* A route request going from the requester
*/
RouteDiscovery route_request = 1;
/*
* A route reply
*/
RouteDiscovery route_reply = 2;
/*
* A failure in delivering a message (usually used for routing control messages, but might be provided
* in addition to ack.fail_id to provide details on the type of failure).
*/
Error error_reason = 3;
}
}
/*
* (Formerly called SubPacket)
* The payload portion fo a packet, this is the actual bytes that are sent
* inside a radio packet (because from/to are broken out by the comms library)
*/
message Data {
/*
* Formerly named typ and of type Type
*/
PortNum portnum = 1;
/*
* TODO: REPLACE
*/
bytes payload = 2;
/*
* Not normally used, but for testing a sender can request that recipient
* responds in kind (i.e. if it received a position, it should unicast back it's position).
* Note: that if you set this on a broadcast you will receive many replies.
*/
bool want_response = 3;
/*
* The address of the destination node.
* This field is is filled in by the mesh radio device software, application
* layer software should never need it.
* RouteDiscovery messages _must_ populate this.
* Other message types might need to if they are doing multihop routing.
*/
fixed32 dest = 4;
/*
* The address of the original sender for this message.
* This field should _only_ be populated for reliable multihop packets (to keep
* packets small).
*/
fixed32 source = 5;
/*
* Only used in routing or response messages.
* Indicates the original message ID that this message is reporting failure on. (formerly called original_id)
*/
fixed32 request_id = 6;
/*
* If set, this message is intened to be a reply to a previously sent message with the defined id.
*/
fixed32 reply_id = 7;
/*
* Defaults to false. If true, then what is in the payload should be treated as an emoji like giving
* a message a heart or poop emoji.
*/
fixed32 emoji = 8;
}
/*
* Waypoint message, used to share arbitrary locations across the mesh
*/
message Waypoint {
/*
* Id of the waypoint
*/
uint32 id = 1;
/*
* latitude_i
*/
sfixed32 latitude_i = 2;
/*
* longitude_i
*/
sfixed32 longitude_i = 3;
/*
* Time the waypoint is to expire (epoch)
*/
uint32 expire = 4;
/*
* If greater than zero, treat the value as a nodenum only allowing them to update the waypoint.
* If zero, the waypoint is open to be edited by any member of the mesh.
*/
uint32 locked_to = 5;
/*
* Name of the waypoint - max 30 chars
*/
string name = 6;
/*
* Description of the waypoint - max 100 chars
*/
string description = 7;
/*
* Designator icon for the waypoint in the form of a unicode emoji
*/
fixed32 icon = 8;
}
/*
* This message will be proxied over the PhoneAPI for the client to deliver to the MQTT server
*/
message MqttClientProxyMessage {
/*
* The MQTT topic this message will be sent /received on
*/
string topic = 1;
/*
* The actual service envelope payload or text for mqtt pub / sub
*/
oneof payload_variant {
/*
* Bytes
*/
bytes data = 2;
/*
* Text
*/
string text = 3;
}
/*
* Whether the message should be retained (or not)
*/
bool retained = 4;
}
/*
* A packet envelope sent/received over the mesh
* only payload_variant is sent in the payload portion of the LORA packet.
* The other fields are either not sent at all, or sent in the special 16 byte LORA header.
*/
message MeshPacket {
/*
* The priority of this message for sending.
* Higher priorities are sent first (when managing the transmit queue).
* This field is never sent over the air, it is only used internally inside of a local device node.
* API clients (either on the local node or connected directly to the node)
* can set this parameter if necessary.
* (values must be <= 127 to keep protobuf field to one byte in size.
* Detailed background on this field:
* I noticed a funny side effect of lora being so slow: Usually when making
* a protocol there isn’t much need to use message priority to change the order
* of transmission (because interfaces are fairly fast).
* But for lora where packets can take a few seconds each, it is very important
* to make sure that critical packets are sent ASAP.
* In the case of meshtastic that means we want to send protocol acks as soon as possible
* (to prevent unneeded retransmissions), we want routing messages to be sent next,
* then messages marked as reliable and finally 'background' packets like periodic position updates.
* So I bit the bullet and implemented a new (internal - not sent over the air)
* field in MeshPacket called 'priority'.
* And the transmission queue in the router object is now a priority queue.
*/
enum Priority {
/*
* Treated as Priority.DEFAULT
*/
UNSET = 0;
/*
* TODO: REPLACE
*/
MIN = 1;
/*
* Background position updates are sent with very low priority -
* if the link is super congested they might not go out at all
*/
BACKGROUND = 10;
/*
* This priority is used for most messages that don't have a priority set
*/
DEFAULT = 64;
/*
* If priority is unset but the message is marked as want_ack,
* assume it is important and use a slightly higher priority
*/
RELIABLE = 70;
/*
* Ack/naks are sent with very high priority to ensure that retransmission
* stops as soon as possible
*/
ACK = 120;
/*
* TODO: REPLACE
*/
MAX = 127;
}
/*
* Identify if this is a delayed packet
*/
enum Delayed {
/*
* If unset, the message is being sent in real time.
*/
NO_DELAY = 0;
/*
* The message is delayed and was originally a broadcast
*/
DELAYED_BROADCAST = 1;
/*
* The message is delayed and was originally a direct message
*/
DELAYED_DIRECT = 2;
}
/*
* The sending node number.
* Note: Our crypto implementation uses this field as well.
* See [crypto](/docs/overview/encryption) for details.
* FIXME - really should be fixed32 instead, this encoding only hurts the ble link though.
*/
fixed32 from = 1;
/*
* The (immediatSee Priority description for more details.y should be fixed32 instead, this encoding only
* hurts the ble link though.
*/
fixed32 to = 2;
/*
* (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
* If unset, packet was on the primary channel.
* A particular node might know only a subset of channels in use on the mesh.
* Therefore channel_index is inherently a local concept and meaningless to send between nodes.
* Very briefly, while sending and receiving deep inside the device Router code, this field instead
* contains the 'channel hash' instead of the index.
* This 'trick' is only used while the payload_variant is an 'encrypted'.
*/
uint32 channel = 3;
/*
* Internally to the mesh radios we will route SubPackets encrypted per [this](docs/developers/firmware/encryption).
* However, when a particular node has the correct
* key to decode a particular packet, it will decode the payload into a SubPacket protobuf structure.
* Software outside of the device nodes will never encounter a packet where
* "decoded" is not populated (i.e. any encryption/decryption happens before reaching the applications)
* The numeric IDs for these fields were selected to keep backwards compatibility with old applications.
*/
oneof payload_variant {
/*
* TODO: REPLACE
*/
Data decoded = 4;
/*
* TODO: REPLACE
*/
bytes encrypted = 5;
}
/*
* A unique ID for this packet.
* Always 0 for no-ack packets or non broadcast packets (and therefore take zero bytes of space).
* Otherwise a unique ID for this packet, useful for flooding algorithms.
* ID only needs to be unique on a _per sender_ basis, and it only
* needs to be unique for a few minutes (long enough to last for the length of
* any ACK or the completion of a mesh broadcast flood).
* Note: Our crypto implementation uses this id as well.
* See [crypto](/docs/overview/encryption) for details.
* FIXME - really should be fixed32 instead, this encoding only
* hurts the ble link though.
*/
fixed32 id = 6;
/*
* The time this message was received by the esp32 (secs since 1970).
* Note: this field is _never_ sent on the radio link itself (to save space) Times
* are typically not sent over the mesh, but they will be added to any Packet
* (chain of SubPacket) sent to the phone (so the phone can know exact time of reception)
*/
fixed32 rx_time = 7;
/*
* *Never* sent over the radio links.
* Set during reception to indicate the SNR of this packet.
* Used to collect statistics on current link quality.
*/
float rx_snr = 8;
/*
* If unset treated as zero (no forwarding, send to adjacent nodes only)
* if 1, allow hopping through one node, etc...
* For our usecase real world topologies probably have a max of about 3.
* This field is normally placed into a few of bits in the header.
*/
uint32 hop_limit = 9;
/*
* This packet is being sent as a reliable message, we would prefer it to arrive at the destination.
* We would like to receive a ack packet in response.
* Broadcasts messages treat this flag specially: Since acks for broadcasts would
* rapidly flood the channel, the normal ack behavior is suppressed.
* Instead, the original sender listens to see if at least one node is rebroadcasting this packet (because naive flooding algorithm).
* If it hears that the odds (given typical LoRa topologies) the odds are very high that every node should eventually receive the message.
* So FloodingRouter.cpp generates an implicit ack which is delivered to the original sender.
* If after some time we don't hear anyone rebroadcast our packet, we will timeout and retransmit, using the regular resend logic.
* Note: This flag is normally sent in a flag bit in the header when sent over the wire
*/
bool want_ack = 10;
/*
* The priority of this message for sending.
* See MeshPacket.Priority description for more details.
*/
Priority priority = 11;
/*
* rssi of received packet. Only sent to phone for dispay purposes.
*/
int32 rx_rssi = 12;
/*
* Describe if this message is delayed
*/
Delayed delayed = 13;
}
/*
* Shared constants between device and phone
*/
enum Constants {
/*
* First enum must be zero, and we are just using this enum to
* pass int constants between two very different environments
*/
ZERO = 0;
/*
* From mesh.options
* note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
* outside of this envelope
*/
DATA_PAYLOAD_LEN = 237;
}
/*
* The bluetooth to device link:
* Old BTLE protocol docs from TODO, merge in above and make real docs...
* use protocol buffers, and NanoPB
* messages from device to phone:
* POSITION_UPDATE (..., time)
* TEXT_RECEIVED(from, text, time)
* OPAQUE_RECEIVED(from, payload, time) (for signal messages or other applications)
* messages from phone to device:
* SET_MYID(id, human readable long, human readable short) (send down the unique ID
* string used for this node, a human readable string shown for that id, and a very
* short human readable string suitable for oled screen) SEND_OPAQUE(dest, payload)
* (for signal messages or other applications) SEND_TEXT(dest, text) Get all
* nodes() (returns list of nodes, with full info, last time seen, loc, battery
* level etc) SET_CONFIG (switches device to a new set of radio params and
* preshared key, drops all existing nodes, force our node to rejoin this new group)
* Full information about a node on the mesh
*/
message NodeInfo {
/*
* The node number
*/
uint32 num = 1;
/*
* The user info for this node
*/
User user = 2;
/*
* This position data. Note: before 1.2.14 we would also store the last time we've heard from this node in position.time, that is no longer true.
* Position.time now indicates the last time we received a POSITION from that node.
*/
Position position = 3;
/*
* Returns the Signal-to-noise ratio (SNR) of the last received message,
* as measured by the receiver. Return SNR of the last received message in dB
*/
float snr = 4;
/*
* TODO: REMOVE/INTEGRATE
* Returns the last measured frequency error.
* The LoRa receiver estimates the frequency offset between the receiver
* center frequency and that of the received LoRa signal. This function
* returns the estimates offset (in Hz) of the last received message.
* Caution: this measurement is not absolute, but is measured relative to the
* local receiver's oscillator. Apparent errors may be due to the
* transmitter, the receiver or both. \return The estimated center frequency
* offset in Hz of the last received message.
* int32 frequency_error = 6;
* enum RouteState {
* Invalid = 0;
* Discovering = 1;
* Valid = 2;
* }
* Not needed?
* RouteState route = 4;
*/
/*
* TODO: REMOVE/INTEGRATE
* Not currently used (till full DSR deployment?) Our current preferred node node for routing - might be the same as num if
* we are adjacent Or zero if we don't yet know a route to this node.
* fixed32 next_hop = 5;
*/
/*
* Set to indicate the last time we received a packet from this node
*/
fixed32 last_heard = 5;
/*
* The latest device metrics for the node.
*/
DeviceMetrics device_metrics = 6;
/*
* local channel index we heard that node on. Only populated if its not the default channel.
*/
uint32 channel = 7;
}
/*
* Error codes for critical errors
* The device might report these fault codes on the screen.
* If you encounter a fault code, please post on the meshtastic.discourse.group
* and we'll try to help.
*/
enum CriticalErrorCode {
/*
* TODO: REPLACE
*/
NONE = 0;
/*
* A software bug was detected while trying to send lora
*/
TX_WATCHDOG = 1;
/*
* A software bug was detected on entry to sleep
*/
SLEEP_ENTER_WAIT = 2;
/*
* No Lora radio hardware could be found
*/
NO_RADIO = 3;
/*
* Not normally used
*/
UNSPECIFIED = 4;
/*
* We failed while configuring a UBlox GPS
*/
UBLOX_UNIT_FAILED = 5;
/*
* This board was expected to have a power management chip and it is missing or broken
*/
NO_AXP192 = 6;
/*
* The channel tried to set a radio setting which is not supported by this chipset,
* radio comms settings are now undefined.
*/
INVALID_RADIO_SETTING = 7;
/*
* Radio transmit hardware failure. We sent data to the radio chip, but it didn't
* reply with an interrupt.
*/
TRANSMIT_FAILED = 8;
/*
* We detected that the main CPU voltage dropped below the minimum acceptable value
*/
BROWNOUT = 9;
/* Selftest of SX1262 radio chip failed */
SX1262_FAILURE = 10;
/*
* A (likely software but possibly hardware) failure was detected while trying to send packets.
* If this occurs on your board, please post in the forum so that we can ask you to collect some information to allow fixing this bug
*/
RADIO_SPI_BUG = 11;
}
/*
* Unique local debugging info for this node
* Note: we don't include position or the user info, because that will come in the
* Sent to the phone in response to WantNodes.
*/
message MyNodeInfo {
/*
* Tells the phone what our node number is, default starting value is
* lowbyte of macaddr, but it will be fixed if that is already in use
*/
uint32 my_node_num = 1;
/*
* The total number of reboots this node has ever encountered
* (well - since the last time we discarded preferences)
*/
uint32 reboot_count = 8;
/*
* The minimum app version that can talk to this device.
* Phone/PC apps should compare this to their build number and if too low tell the user they must update their app
*/
uint32 min_app_version = 11;
}
/*
* Debug output from the device.
* To minimize the size of records inside the device code, if a time/source/level is not set
* on the message it is assumed to be a continuation of the previously sent message.
* This allows the device code to use fixed maxlen 64 byte strings for messages,
* and then extend as needed by emitting multiple records.
*/
message LogRecord {
/*
* Log levels, chosen to match python logging conventions.
*/
enum Level {
/*
* Log levels, chosen to match python logging conventions.
*/
UNSET = 0;
/*
* Log levels, chosen to match python logging conventions.
*/
CRITICAL = 50;
/*
* Log levels, chosen to match python logging conventions.
*/
ERROR = 40;
/*
* Log levels, chosen to match python logging conventions.
*/
WARNING = 30;
/*
* Log levels, chosen to match python logging conventions.
*/
INFO = 20;
/*
* Log levels, chosen to match python logging conventions.
*/
DEBUG = 10;
/*
* Log levels, chosen to match python logging conventions.
*/
TRACE = 5;
}
/*
* Log levels, chosen to match python logging conventions.
*/
string message = 1;
/*
* Seconds since 1970 - or 0 for unknown/unset
*/
fixed32 time = 2;
/*
* Usually based on thread name - if known
*/
string source = 3;
/*
* Not yet set
*/
Level level = 4;
}
message QueueStatus {
/* Last attempt to queue status, ErrorCode */
int32 res = 1;
/* Free entries in the outgoing queue */
uint32 free = 2;
/* Maximum entries in the outgoing queue */
uint32 maxlen = 3;
/* What was mesh packet id that generated this response? */
uint32 mesh_packet_id = 4;
}
/*
* Packets from the radio to the phone will appear on the fromRadio characteristic.
* It will support READ and NOTIFY. When a new packet arrives the device will BLE notify?
* It will sit in that descriptor until consumed by the phone,
* at which point the next item in the FIFO will be populated.
*/
message FromRadio {
/*
* The packet id, used to allow the phone to request missing read packets from the FIFO,
* see our bluetooth docs
*/
uint32 id = 1;
/*
* Log levels, chosen to match python logging conventions.
*/
oneof payload_variant {
/*
* Log levels, chosen to match python logging conventions.
*/
MeshPacket packet = 2;
/*
* Tells the phone what our node number is, can be -1 if we've not yet joined a mesh.
* NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
*/
MyNodeInfo my_info = 3;
/*
* One packet is sent for each node in the on radio DB
* starts over with the first node in our DB
*/
NodeInfo node_info = 4;
/*
* Include a part of the config (was: RadioConfig radio)
*/
Config config = 5;
/*
* Set to send debug console output over our protobuf stream
*/
LogRecord log_record = 6;
/*
* Sent as true once the device has finished sending all of the responses to want_config
* recipient should check if this ID matches our original request nonce, if
* not, it means your config responses haven't started yet.
* NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
*/
uint32 config_complete_id = 7;
/*
* Sent to tell clients the radio has just rebooted.
* Set to true if present.
* Not used on all transports, currently just used for the serial console.
* NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
*/
bool rebooted = 8;
/*
* Include module config
*/
ModuleConfig moduleConfig = 9;
/*
* One packet is sent for each channel
*/
Channel channel = 10;
/*
* Queue status info
*/
QueueStatus queueStatus = 11;
/*
* File Transfer Chunk
*/
XModem xmodemPacket = 12;
/*
* Device metadata message
*/
DeviceMetadata metadata = 13;
/*
* MQTT Client Proxy Message (device sending to client / phone for publishing to MQTT)
*/
MqttClientProxyMessage mqttClientProxyMessage = 14;
}
}
/*
* Packets/commands to the radio will be written (reliably) to the toRadio characteristic.
* Once the write completes the phone can assume it is handled.
*/
message ToRadio {
/*
* Log levels, chosen to match python logging conventions.
*/
oneof payload_variant {
/*
* Send this packet on the mesh
*/
MeshPacket packet = 1;
/*
* Phone wants radio to send full node db to the phone, This is
* typically the first packet sent to the radio when the phone gets a
* bluetooth connection. The radio will respond by sending back a
* MyNodeInfo, a owner, a radio config and a series of
* FromRadio.node_infos, and config_complete
* the integer you write into this field will be reported back in the
* config_complete_id response this allows clients to never be confused by
* a stale old partially sent config.
*/
uint32 want_config_id = 3;
/*
* Tell API server we are disconnecting now.
* This is useful for serial links where there is no hardware/protocol based notification that the client has dropped the link.
* (Sending this message is optional for clients)
*/
bool disconnect = 4;
/*
* File Transfer Chunk
*/
XModem xmodemPacket = 5;
/*
* MQTT Client Proxy Message (for client / phone subscribed to MQTT sending to device)
*/
MqttClientProxyMessage mqttClientProxyMessage = 6;
}
}
/*
* Compressed message payload
*/
message Compressed {
/*
* PortNum to determine the how to handle the compressed payload.
*/
PortNum portnum = 1;
/*
* Compressed data.
*/
bytes data = 2;
}
/*
* Full info on edges for a single node
*/
message NeighborInfo {
/*
* The node ID of the node sending info on its neighbors
*/
uint32 node_id = 1;
/*
* Field to pass neighbor info for the next sending cycle
*/
uint32 last_sent_by_id = 2;
/*
* Broadcast interval of the represented node (in seconds)
*/
uint32 node_broadcast_interval_secs = 3;
/*
* The list of out edges from this node
*/
repeated Neighbor neighbors = 4;
}
/*
* A single edge in the mesh
*/
message Neighbor {
/*
* Node ID of neighbor
*/
uint32 node_id = 1;
/*
* SNR of last heard message
*/
float snr = 2;
/*
* Reception time (in secs since 1970) of last message that was last sent by this ID.
* Note: this is for local storage only and will not be sent out over the mesh.
*/
fixed32 last_rx_time = 3;
/*
* Broadcast interval of this neighbor (in seconds).
* Note: this is for local storage only and will not be sent out over the mesh.
*/
uint32 node_broadcast_interval_secs = 4;
}
/*
* Device metadata response
*/
message DeviceMetadata {
/*
* Device firmware version string
*/
string firmware_version = 1;
/*
* Device state version
*/
uint32 device_state_version = 2;
/*
* Indicates whether the device can shutdown CPU natively or via power management chip
*/
bool canShutdown = 3;
/*
* Indicates that the device has native wifi capability
*/
bool hasWifi = 4;
/*
* Indicates that the device has native bluetooth capability
*/
bool hasBluetooth = 5;
/*
* Indicates that the device has an ethernet peripheral
*/
bool hasEthernet = 6;
/*
* Indicates that the device's role in the mesh
*/
Config.DeviceConfig.Role role = 7;
/*
* Indicates the device's current enabled position flags
*/
uint32 position_flags = 8;
/*
* Device hardware model
*/
HardwareModel hw_model = 9;
/*
* Has Remote Hardware enabled
*/
bool hasRemoteHardware = 10;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik