syntax = "proto3"; option java_package = "com.geeksville.mesh"; option java_outer_classname = "ConfigProtos"; option optimize_for = LITE_RUNTIME; option go_package = "github.com/meshtastic/gomeshproto"; message Config { /* * TODO: REPLACE */ message DeviceConfig { /* * Defines the device's role on the Mesh network * unset * Behave normally. * Router * Functions as a router */ enum Role { /* * Client device role */ Client = 0; /* * ClientMute device role * This is like the client but packets will not hop over this node. Would be * useful if you want to save power by not contributing to the mesh. */ ClientMute = 1; /* * Router device role. * Uses an agressive algirithem for the flood networking so packets will * prefer to be routed over this node. Also assume that this will be generally * unattended and so will turn off the wifi/ble radio as well as the oled screen. */ Router = 2; /* * RouterClient device role * Uses an agressive algirithem for the flood networking so packets will * prefer to be routed over this node. Similiar power management as a regular * client, so the RouterClient can be used as both a Router and a Client. Useful * as a well placed base station that you could also use to send messages. */ RouterClient = 3; } /* * Sets the role of node */ Role role = 1; /* * If set, this will disable the SerialConsole by not initilizing the StreamAPI */ bool serial_disabled = 2; /* * This setting is never saved to disk, but if set, all device settings will be returned to factory defaults. * (Region, serial number etc... will be preserved) */ bool factory_reset = 3; /* * By default we turn off logging as soon as an API client connects (to keep shared serial link quiet). * Set this to true to leave the debug log outputting even when API is active. */ bool debug_log_enabled = 4; /* * NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org` */ string ntp_server = 5; } /* * TODO: REPLACE */ message PositionConfig { /* * Bit field of boolean configuration options, indicating which optional * fields to include when assembling POSITION messages * Longitude and latitude are always included (also time if GPS-synced) * NOTE: the more fields are included, the larger the message will be - * leading to longer airtime and a higher risk of packet loss */ enum PositionFlags { /* * Required for compilation */ POS_UNDEFINED = 0x0000; /* * Include an altitude value (if available) */ POS_ALTITUDE = 0x0001; /* * Altitude value is MSL */ POS_ALT_MSL = 0x0002; /* * Include geoidal separation */ POS_GEO_SEP = 0x0004; /* * Include the DOP value ; PDOP used by default, see below */ POS_DOP = 0x0008; /* * If POS_DOP set, send separate HDOP / VDOP values instead of PDOP */ POS_HVDOP = 0x0010; /* * Include number of "satellites in view" */ POS_SATINVIEW = 0x0020; /* * Include a sequence number incremented per packet */ POS_SEQ_NOS = 0x0040; /* * Include positional timestamp (from GPS solution) */ POS_TIMESTAMP = 0x0080; } /* * We should send our position this often (but only if it has changed significantly) * Defaults to 15 minutes */ uint32 position_broadcast_secs = 1; /* * Disable adaptive position braoadcast, which is now the default. */ bool position_broadcast_smart_disabled = 2; /* * If set, this node is at a fixed position. * We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node. * The lat/lon/alt can be set by an internal GPS or with the help of the app. */ bool fixed_position = 3; /* * Should the GPS be disabled for this node? */ bool gps_disabled = 5; /* * How often should we try to get GPS position (in seconds) * or zero for the default of once every 30 seconds * or a very large value (maxint) to update only once at boot. */ uint32 gps_update_interval = 6; /* * How long should we try to get our position during each gps_update_interval attempt? (in seconds) * Or if zero, use the default of 30 seconds. * If we don't get a new gps fix in that time, the gps will be put into sleep until the next gps_update_rate * window. */ uint32 gps_attempt_time = 7; /* * Bit field of boolean configuration options for POSITION messages * (bitwise OR of PositionFlags) */ uint32 position_flags = 10; } /* * TODO: REPLACE */ message PowerConfig { /* * Sets the charge control current of devices with a battery charger that can be * configured. This is passed into the axp power management chip like on the tbeam. */ enum ChargeCurrent { /* * TODO: REPLACE */ MAUnset = 0; /* * TODO: REPLACE */ MA100 = 1; /* * TODO: REPLACE */ MA190 = 2; /* * TODO: REPLACE */ MA280 = 3; /* * TODO: REPLACE */ MA360 = 4; /* * TODO: REPLACE */ MA450 = 5; /* * TODO: REPLACE */ MA550 = 6; /* * TODO: REPLACE */ MA630 = 7; /* * TODO: REPLACE */ MA700 = 8; /* * TODO: REPLACE */ MA780 = 9; /* * TODO: REPLACE */ MA880 = 10; /* * TODO: REPLACE */ MA960 = 11; /* * TODO: REPLACE */ MA1000 = 12; /* * TODO: REPLACE */ MA1080 = 13; /* * TODO: REPLACE */ MA1160 = 14; /* * TODO: REPLACE */ MA1240 = 15; /* * TODO: REPLACE */ MA1320 = 16; } /* * Sets the current of the battery charger */ ChargeCurrent charge_current = 1; /* * If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in * we should try to minimize power consumption as much as possible. * YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case). */ bool is_low_power = 2; /* * Circumvents the logic block for determining whether the device is powered or not. * Useful for devices with finicky ADC issues on the battery sense pins. */ bool is_always_powered = 3; /* * If non-zero, the device will fully power off this many seconds after external power is removed. */ uint32 on_battery_shutdown_after_secs = 4; /* * If set to true, enable power saving features of the esp32 */ bool is_power_saving = 5; /* * Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k) * Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation. */ float adc_multiplier_override = 6; /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of 1 minute */ uint32 wait_bluetooth_secs = 7; /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of two hours, MAXUINT for disabled */ uint32 mesh_sds_timeout_secs = 9; /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of one year */ uint32 sds_secs = 10; /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of 3600 */ uint32 ls_secs = 11; /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of 10 seconds */ uint32 min_wake_secs = 12; } /* * TODO: REPLACE */ message WiFiConfig { /* * If set, this node will try to join the specified wifi network and * acquire an address via DHCP */ string ssid = 1; /* * If set, will be use to authenticate to the named wifi */ string psk = 2; /* * If set, the node will operate as an AP (and DHCP server), otherwise it * will be a station */ bool ap_mode = 3; /* * If set, the node AP will broadcast as a hidden SSID */ bool ap_hidden = 4; } /* * TODO: REPLACE */ message DisplayConfig { /* * How the GPS coordinates are displayed on the OLED screen. */ enum GpsCoordinateFormat { /* * GPS coordinates are displayed in the normal decimal degrees format: * DD.DDDDDD DDD.DDDDDD */ GpsFormatDec = 0; /* * GPS coordinates are displayed in the degrees minutes seconds format: * DD°MM'SS"C DDD°MM'SS"C, where C is the compass point representing the locations quadrant */ GpsFormatDMS = 1; /* * GPS coordinates are displayed in Universal Transverse Mercator format: * ZZB EEEEEE NNNNNNN, where Z is zone, B is band, E is easting, N is northing */ GpsFormatUTM = 2; /* * GPS coordinates are displayed in Military Grid Reference System format: * ZZB CD EEEEE NNNNN, where Z is zone, B is band, C is the east 100k square, D is the north 100k square, * E is easting, N is northing */ GpsFormatMGRS = 3; /* * GPS coordinates are displayed in Open Location Code (aka Plus Codes). */ GpsFormatOLC = 4; /* * GPS coordinates are displayed in Ordnance Survey Grid Reference (the National Grid System of the UK). * Format: AB EEEEE NNNNN, where A is the east 100k square, B is the north 100k square, E is the easting, * N is the northing */ GpsFormatOSGR = 5; } /* * Power management state machine option. * See [power management](/docs/software/other/power) for details. * 0 for default of one minute */ uint32 screen_on_secs = 1; /* * How the GPS coordinates are displayed on the OLED screen. */ GpsCoordinateFormat gps_format = 2; /* * Automatically toggles to the next page on the screen like a carousel, based the specified interval in seconds. * Potentially useful for devices without user buttons. */ uint32 auto_screen_carousel_secs = 3; } /* * TODO: REPLACE */ message LoRaConfig { /* * The frequency/regulatory region the user has selected. * Note: In 1.0 builds (which must still be supported by the android app for a * long time) this field will be unpopulated. * If firmware is ever upgraded from an old 1.0ish build, the old * MyNodeInfo.region string will be used to set UserPreferences.region and the * old value will be no longer set. */ enum RegionCode { /* * TODO: REPLACE */ Unset = 0; /* * TODO: REPLACE */ US = 1; /* * TODO: REPLACE */ EU433 = 2; /* * TODO: REPLACE */ EU868 = 3; /* * TODO: REPLACE */ CN = 4; /* * TODO: REPLACE */ JP = 5; /* * TODO: REPLACE */ ANZ = 6; /* * TODO: REPLACE */ KR = 7; /* * TODO: REPLACE */ TW = 8; /* * TODO: REPLACE */ RU = 9; /* * TODO: REPLACE */ IN = 10; /* * TODO: REPLACE */ NZ865 = 11; /* * TODO: REPLACE */ TH = 12; } /* * Standard predefined channel settings * Note: these mappings must match ModemPreset Choice in the device code. */ enum ModemPreset { /* * TODO: REPLACE */ LongFast = 0; /* * TODO: REPLACE */ LongSlow = 1; /* * TODO: REPLACE */ VLongSlow = 2; /* * TODO: REPLACE */ MidSlow = 3; /* * TODO: REPLACE */ MidFast = 4; /* * TODO: REPLACE */ ShortSlow = 5; /* * TODO: REPLACE */ ShortFast = 6; } /* * If zero then, use default max legal continuous power (ie. something that won't * burn out the radio hardware) * In most cases you should use zero here. * Units are in dBm. */ int32 tx_power = 1; /* * Note: This is the 'old' mechanism for specifying channel parameters. * Either modem_config or bandwidth/spreading/coding will be specified - NOT BOTH. * As a heuristic: If bandwidth is specified, do not use modem_config. * Because protobufs take ZERO space when the value is zero this works out nicely. * This value is replaced by bandwidth/spread_factor/coding_rate. * If you'd like to experiment with other options add them to MeshRadio.cpp in the device code. */ ModemPreset modem_preset = 2; /* * Bandwidth in MHz * Certain bandwidth numbers are 'special' and will be converted to the * appropriate floating point value: 31 -> 31.25MHz */ uint32 bandwidth = 3; /* * A number from 7 to 12. * Indicates number of chirps per symbol as 1<