diff --git a/docs/docs.md b/docs/docs.md
index 396a340..1fec0f2 100644
--- a/docs/docs.md
+++ b/docs/docs.md
@@ -52,6 +52,7 @@
- [ChargeCurrent](#.ChargeCurrent)
- [GpsOperation](#.GpsOperation)
- [LocationSharing](#.LocationSharing)
+ - [RadioConfig.UserPreferences.EnvironmentalMeasurementSensorType](#.RadioConfig.UserPreferences.EnvironmentalMeasurementSensorType)
- [RegionCode](#.RegionCode)
- [remote_hardware.proto](#remote_hardware.proto)
@@ -78,8 +79,6 @@ is used to do settings operations to both remote AND local nodes.
(Prior to 1.2 these operations were done via special ToRadio operations)
-FIXME - move the radioconfig/user/channel READ operations into AdminMessage as well
-
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
@@ -832,9 +831,6 @@ Reserved for built-in GPIO/example app. See remote_hardware.proto/HardwareMessag
| ADMIN_APP | 6 | Admin control packets, payload is a AdminMessage protobuf |
| REPLY_APP | 32 | Provides a 'ping' service that replies to any packet it receives. Also this serves as a small example plugin. |
| IP_TUNNEL_APP | 33 | Used for the python IP tunnel feature |
-| ENVIRONMENTAL_MEASUREMENT_APP | 34 | Provides a format to send and receive environmental data from the Meshtastic network.
-
-Maintained by Charles Crossan (crossan007) : crossan007@gmail.com |
| SERIAL_APP | 64 | Provides a hardware serial interface to send and receive from the Meshtastic network. Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network. Maximum packet size of 240 bytes.
Plugin is disabled by default can be turned on by setting SERIALPLUGIN_ENABLED = 1 in SerialPlugh.cpp. Maintained by Jm Casler (MC Hamster) : jm@casler.org |
@@ -844,6 +840,9 @@ Maintained by Jm Casler (MC Hamster) : jm@casler.org |
| RANGE_TEST_APP | 66 | STORE_FORWARD_APP (Work in Progress)
Maintained by Jm Casler (MC Hamster) : jm@casler.org |
+| ENVIRONMENTAL_MEASUREMENT_APP | 67 | Provides a format to send and receive environmental data from the Meshtastic network.
+
+Maintained by Charles Crossan (crossan007) : crossan007@gmail.com |
| PRIVATE_APP | 256 | Private applications should use portnums >= 256. To simplify initial development and testing you can use "PRIVATE_APP" in your code without needing to rebuild protobuf files (via bin/regin_protos.sh) |
| ATAK_FORWARDER | 257 | ATAK Forwarder Plugin https://github.com/paulmandal/atak-forwarder |
| MAX | 511 | Currently we limit port nums to no higher than this value |
@@ -964,6 +963,9 @@ FIXME - Move this out of UserPreferences and into a section for plugin configura
| environmental_measurement_plugin_read_error_count_threshold | [uint32](#uint32) | | Sometimes sensor reads can fail. If this happens, we will retry a configurable number of attempts Each attempt will be delayed by the minimum required refresh rate for that sensor |
| environmental_measurement_plugin_update_interval | [uint32](#uint32) | | Interval in seconds of how often we should try to send our measurements to the mesh |
| environmental_measurement_plugin_recovery_interval | [uint32](#uint32) | | Sometimes we can end up with more than read_error_count_threshold failures. In this case, we will stop trying to read from the sensor for a while. Wait this long until trying to read from the sensor again |
+| environmental_measurement_plugin_display_farenheit | [bool](#bool) | | We'll always read the sensor in Celsius, but sometimes we might want to display the results in Farenheit as a "user preference". s |
+| environmental_measurement_plugin_sensor_type | [RadioConfig.UserPreferences.EnvironmentalMeasurementSensorType](#RadioConfig.UserPreferences.EnvironmentalMeasurementSensorType) | | Specify the sensor type |
+| environmental_measurement_plugin_sensor_pin | [uint32](#uint32) | | Specify the peferred GPIO Pin for sensor readings |
@@ -1031,6 +1033,17 @@ How our location is shared with other nodes (or the local phone)
+
+
+### RadioConfig.UserPreferences.EnvironmentalMeasurementSensorType
+
+
+| Name | Number | Description |
+| ---- | ------ | ----------- |
+| DHT11 | 0 | |
+
+
+
### RegionCode