move admin ops to the admin service

docs/docs.md

@@ -11,6 +11,7 @@
     - [DeviceState](#.DeviceState)
   
 - [mesh.proto](#mesh.proto)
+    - [AdminMessage](#.AdminMessage)
     - [Channel](#.Channel)
     - [ChannelSettings](#.ChannelSettings)
     - [Data](#.Data)
@@ -170,6 +171,28 @@ To generate Nanopb c code:
 Nanopb binaries available here: https://jpa.kapsi.fi/nanopb/download/ use nanopb 0.4.0
 
 
+<a name=".AdminMessage"></a>
+
+### AdminMessage
+This message is handled by the Admin plugin and is responsible for all settings/channel read/write operations.  This message
+is used to do settings operations to both remote AND local nodes.
+
+(Prior to 1.2 these operations were done via special ToRadio operations)
+
+FIXME - move the radioconfig/user/channel READ operations into AdminMessage as well
+
+
+| Field | Type | Label | Description |
+| ----- | ---- | ----- | ----------- |
+| set_radio | [RadioConfig](#RadioConfig) |  | set the radio provisioning for this node |
+| set_owner | [User](#User) |  | Set the owner for this node |
+| set_channel | [Channel](#Channel) |  | Set channels (using the new API). A special channel is the &#34;primary channel&#34;. The other records are secondary channels. Note: only one channel can be marked as primary. If the client sets a particular channel to be primary, the previous channel will be set to SECONDARY automatically |
+
+
+
+
+
+
 <a name=".Channel"></a>
 
 ### Channel
@@ -550,9 +573,6 @@ Once the write completes the phone can assume it is handled.
 | ----- | ---- | ----- | ----------- |
 | packet | [MeshPacket](#MeshPacket) |  | send this packet on the mesh |
 | want_config_id | [uint32](#uint32) |  | phone wants radio to send full node db to the phone, This is typically the first packet sent to the radio when the phone gets a bluetooth connection. The radio will respond by sending back a MyNodeInfo, a owner, a radio config and a series of FromRadio.node_infos, and config_complete the integer you write into this field will be reported back in the config_complete_id response this allows clients to never be confused by a stale old partially sent config. |
-| set_radio | [RadioConfig](#RadioConfig) |  | set the radio provisioning for this node |
-| set_owner | [User](#User) |  | Set the owner for this node |
-| set_channel | [Channel](#Channel) |  | Set channels (using the new API). A special channel is the &#34;primary channel&#34;. The other records are secondary channels. Note: only one channel can be marked as primary. If the client sets a particular channel to be primary, the previous channel will be set to SECONDARY automatically |
 
 
 
@@ -870,6 +890,7 @@ Reserved for built-in GPIO/example app. See remote_hardware.proto/HardwareMessag
 | POSITION_APP | 3 | The built-in position messaging app. See Position for details on the message sent to this port number. payload is a Position protobuf |
 | NODEINFO_APP | 4 | The built-in user info app. See User for details on the message sent to this port number. payload is a User protobuf |
 | ROUTING_APP | 5 | Protocol control packets for mesh protocol use, payload is a Routing protobuf |
+| ADMIN_APP | 6 | Admin control packets, payload is a AdminMessage protobuf |
 | REPLY_APP | 32 | Provides a &#39;ping&#39; service that replies to any packet it receives. Also this serves as a small example plugin. |
 | IP_TUNNEL_APP | 33 | Used for the python IP tunnel feature |
 | SERIAL_APP | 64 | Provides a hardware serial interface to send and receive from the Meshtastic network. Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network. Maximum packet size of 240 bytes.

mesh.options

@@ -39,6 +39,8 @@
 
 *Routing.variant anonymous_oneof:true
 
+*AdminMessage.variant anonymous_oneof:true
+
 # Max of three ignored nodes for our testing
 *UserPreferences.ignore_incoming max_count:3
 

mesh.proto

@@ -1257,20 +1257,33 @@ message ToRadio {
      * a stale old partially sent config.
      */
     uint32 want_config_id = 100;
+  }
+}
+
+/* This message is handled by the Admin plugin and is responsible for all settings/channel read/write operations.  This message
+is used to do settings operations to both remote AND local nodes.
+
+(Prior to 1.2 these operations were done via special ToRadio operations)
+
+FIXME - move the radioconfig/user/channel READ operations into AdminMessage as well
+*/
+message AdminMessage {
+
+  oneof variant {
 
     /*
      * set the radio provisioning for this node
      */
-    RadioConfig set_radio = 101; 
+     RadioConfig set_radio = 1; 
 
-    /*
-     * Set the owner for this node
-     */
-    User set_owner = 102; 
-
-    /*
-     * Set channels (using the new API).  A special channel is the "primary channel".  The other records are secondary channels.
-     * Note: only one channel can be marked as primary.  If the client sets a particular channel to be primary, the previous channel will be set to SECONDARY automatically */
-    Channel set_channel = 104;
+     /*
+      * Set the owner for this node
+      */
+     User set_owner = 2; 
+ 
+     /*
+      * Set channels (using the new API).  A special channel is the "primary channel".  The other records are secondary channels.
+      * Note: only one channel can be marked as primary.  If the client sets a particular channel to be primary, the previous channel will be set to SECONDARY automatically */
+     Channel set_channel = 3;
   }
-}
+}

portnums.proto

@@ -72,6 +72,9 @@ enum PortNum {
     /* Protocol control packets for mesh protocol use, payload is a Routing protobuf */
     ROUTING_APP = 5;
 
+    /* Admin control packets, payload is a AdminMessage protobuf */
+    ADMIN_APP = 6;
+
     /*
      * Provides a 'ping' service that replies to any packet it receives.  Also this serves as a small example plugin.
      */