Added remote hardware pins plumbing

meshtastic/deviceonly.options

@@ -12,3 +12,5 @@
 *OEMStore.oem_text max_size:40
 *OEMStore.oem_icon_bits max_size:2048
 *OEMStore.oem_aes_key max_size:32
+
+*NodeRemoteHardwarePins.node_remote_hardware_pins max_count:12

meshtastic/deviceonly.proto

@@ -72,6 +72,11 @@ message DeviceState {
    * Might be null
    */
   MeshPacket rx_waypoint = 12;
+
+  /*
+   * The mesh's nodes with their available gpio pins for RemoteHardware module
+   */
+  repeated NodeRemoteHardwarePins node_remote_hardware_pins = 13;
 }
 
 /*
@@ -158,4 +163,20 @@ message OEMStore {
    * A Preset LocalModuleConfig to apply during factory reset
    */
   LocalModuleConfig oem_local_module_config = 8;
+}
+
+/*
+ * RemoteHardwarePins associated with a node
+ */
+message NodeRemoteHardwarePin {
+
+  /*
+   * The node_num exposing the available gpio pin
+   */
+  uint32 node_num = 1;
+
+  /*
+   * The the available gpio pin for usage with RemoteHardware module
+   */
+  RemoteHardwarePin pin = 2;
 }

meshtastic/mesh.options

@@ -54,3 +54,5 @@
 *NeighborInfo.neighbors max_count:10
 
 *DeviceMetadata.firmware_version max_size:18
+
+*RemoteHardwarePin.name         max_size:15

meshtastic/mesh.proto

@@ -1469,3 +1469,41 @@ message Neighbor {
    */
   HardwareModel hw_model = 9;
 }
+
+/*
+ * A GPIO pin definition for remote hardware module
+ */
+message RemoteHardwarePin {
+  /*
+   * GPIO Pin number (must match Arduino)
+   */
+  uint32 gpio_pin = 1;
+
+  /*
+   * Name for the GPIO pin (i.e. Front gate, mailbox, etc)
+   */
+  string name = 2;
+
+  /*
+   * Type of GPIO access available to consumers on the mesh
+   */
+  RemoteHardwarePinType type = 3;
+}
+
+enum RemoteHardwarePinType {
+
+  /*
+   * Unset/unused (should never occur)
+   */
+  UNSET = 0;
+
+  /*
+   * GPIO pin can be read (if it is high / low)
+   */
+  ANALOG_READ = 1;
+
+  /*
+   * GPIO pin can be written to (high / low)
+   */
+  ANALOG_WRITE = 2;
+}

meshtastic/module_config.options

@@ -14,3 +14,5 @@
 *ExternalNotificationConfig.output_vibra int_size:8
 *ExternalNotificationConfig.output_buzzer int_size:8
 *ExternalNotificationConfig.nag_timeout int_size:16
+
+*RemoteHardwareConfig:available_pins max_count:4

meshtastic/module_config.proto

@@ -78,6 +78,16 @@ message ModuleConfig {
      * Whether the Module is enabled
      */
     bool enabled = 1;
+
+    /*
+     * Whether the Module allows consumers to read / write to pins not defined in available_pins
+     */
+    bool allow_undefined_pin_access = 2;
+
+    /*
+     * Exposes the available pins to the mesh for reading and writing
+     */
+    repeated RemoteHardwarePin available_pins = 3:
   }
 
   /*