Kevin Hester 5f2f3c94b9 PPR1 and allow boards to set lower or higher sx1262 power limits		2020-10-15 13:47:10 +08:00
..
build-all.sh	Add Korean Frequency	2020-09-21 16:10:20 +09:00
device-install.sh	Adding port/help flags and error checking	2020-07-27 09:14:04 -04:00
device-update.sh	Adding port/help flags and error checking	2020-07-27 09:14:04 -04:00
dump-ram-users.sh	ram investigation notes	2020-06-16 15:01:39 -07:00
exception_decoder.py	…
genpartitions.py	…
install-bootloader.sh	PPR1 and allow boards to set lower or higher sx1262 power limits	2020-10-15 13:47:10 +08:00
lora32-openocd.cfg	…
nrf52-console.sh	improve NRF52 debugging environment	2020-05-26 15:55:36 -07:00
nrf52832-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
nrf52833-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
nrf52840-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
program-release-heltec.sh	…
program-release-tbeam.sh	…
qspi-flash-test.sh	eink board serial flash seems to work	2020-09-28 14:10:33 -07:00
read-system-info.sh	…
regen-protos.sh	begin cleaning up mesh library layer so that it could be split someday	2020-04-27 07:54:19 -07:00
run-0-monitor.sh	…
run-1-monitor.sh	…
run-both-monitor.sh	…
run-openocd.sh	…
start-terminal0.sh	change serial baud rate to 921600	2020-04-22 14:58:35 -07:00
start-terminal1.sh	change serial baud rate to 921600	2020-04-22 14:58:35 -07:00
uf2conv.py	@BigCorvus board now kinda boots	2020-08-17 11:29:00 -07:00
upload-to-bootloader.sh	corvus2 gps still doesn't work WIP	2020-10-13 14:43:28 +08:00
upload-usb1.sh	…
version.sh	1.1.5	2020-10-14 09:04:20 +08:00
view-map.sh	PPR1 and allow boards to set lower or higher sx1262 power limits	2020-10-15 13:47:10 +08:00