kopia lustrzana https://github.com/meshtastic/firmware
138 wiersze
3.4 KiB
C
138 wiersze
3.4 KiB
C
#ifndef _VARIANT_MAKERPYTHON_NRF82540_OLED_
|
|
#define _VARIANT_MAKERPYTHON_NRF82540_OLED_
|
|
|
|
#define MAKERPYTHON
|
|
|
|
/** Master clock frequency */
|
|
#define VARIANT_MCK (64000000ul)
|
|
|
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
|
// define USE_LFRC // Board uses RC for LF
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "WVariant.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif // __cplusplus
|
|
|
|
// Number of pins defined in PinDescription array
|
|
#define PINS_COUNT (48)
|
|
#define NUM_DIGITAL_PINS (48)
|
|
#define NUM_ANALOG_INPUTS (6)
|
|
#define NUM_ANALOG_OUTPUTS (0)
|
|
|
|
#define RADIOLIB_GODMODE
|
|
|
|
// LEDs
|
|
#define PIN_LED1 (32 + 10) // LED P1.15
|
|
#define PIN_LED2 (-1) //
|
|
|
|
#define LED_BUILTIN PIN_LED1
|
|
#define LED_CONN PIN_LED2
|
|
|
|
#define LED_GREEN PIN_LED1
|
|
#define LED_BLUE PIN_LED2
|
|
|
|
#define LED_STATE_ON 0 // State when LED is litted
|
|
|
|
/*
|
|
* Buttons
|
|
*/
|
|
|
|
#define PIN_BUTTON1 (32 + 15) // P1.15 Built in button
|
|
|
|
/*
|
|
* Analog pins
|
|
*/
|
|
#define PIN_A0 (-1)
|
|
|
|
static const uint8_t A0 = PIN_A0;
|
|
#define ADC_RESOLUTION 14
|
|
|
|
// Other pins
|
|
#define PIN_AREF (-1) // AREF Not yet used
|
|
|
|
static const uint8_t AREF = PIN_AREF;
|
|
|
|
/*
|
|
* Serial interfaces
|
|
*/
|
|
#define PIN_SERIAL1_RX (-1)
|
|
#define PIN_SERIAL1_TX (-1)
|
|
|
|
// Connected to Jlink CDC
|
|
#define PIN_SERIAL2_RX (-1)
|
|
#define PIN_SERIAL2_TX (-1)
|
|
|
|
/*
|
|
* SPI Interfaces
|
|
*/
|
|
#define SPI_INTERFACES_COUNT 1
|
|
|
|
#define PIN_SPI_MISO (0 + 31) // MISO P0.31
|
|
#define PIN_SPI_MOSI (0 + 30) // MOSI P0.30
|
|
#define PIN_SPI_SCK (0 + 29) // SCK P0.29
|
|
|
|
static const uint8_t SS = (32 + 15); // LORA_CS P1.15
|
|
static const uint8_t MOSI = PIN_SPI_MOSI;
|
|
static const uint8_t MISO = PIN_SPI_MISO;
|
|
static const uint8_t SCK = PIN_SPI_SCK;
|
|
|
|
/*
|
|
* Wire Interfaces
|
|
*/
|
|
#define WIRE_INTERFACES_COUNT 1
|
|
|
|
#define PIN_WIRE_SDA (0 + 26) // SDA
|
|
#define PIN_WIRE_SCL (0 + 27) // SCL
|
|
|
|
// E-Byte E28 2.4 Ghz LoRa module
|
|
#define USE_SX1280
|
|
#define LORA_RESET (0 + 5)
|
|
#define SX128X_CS (0 + 23)
|
|
#define SX128X_DIO1 (0 + 4)
|
|
#define SX128X_BUSY (0 + 7)
|
|
// #define SX128X_TXEN (32 + 9)
|
|
// #define SX128X_RXEN (0 + 12)
|
|
#define SX128X_RESET LORA_RESET
|
|
|
|
#define PIN_GPS_EN (-1)
|
|
#define PIN_GPS_PPS (-1) // Pulse per second input from the GPS
|
|
|
|
#define GPS_RX_PIN PIN_SERIAL1_RX
|
|
#define GPS_TX_PIN PIN_SERIAL1_TX
|
|
|
|
// Battery
|
|
// The battery sense is hooked to pin A0 (5)
|
|
#define BATTERY_PIN PIN_A0
|
|
// and has 12 bit resolution
|
|
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
|
#define BATTERY_SENSE_RESOLUTION 4096.0
|
|
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
|
#define VBAT_MV_PER_LSB (0.73242188F)
|
|
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
|
|
#define VBAT_DIVIDER (0.4F)
|
|
// Compensation factor for the VBAT divider
|
|
#define VBAT_DIVIDER_COMP (1.73)
|
|
// Fixed calculation of milliVolt from compensation value
|
|
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
|
#undef AREF_VOLTAGE
|
|
#define AREF_VOLTAGE 3.0
|
|
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
|
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
|
|
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Arduino objects - C++ only
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#endif
|