meshtastic-firmware/variants/m5stack_coreink/variant.h

95 wiersze
2.2 KiB
C

// Primary I2C Bus includes PCF8563 RTC Module
#define I2C_SDA 21
#define I2C_SCL 22
// 7-07-2023 Or enable Secondary I2C Bus
// #define I2C_SDA1 32
// #define I2C_SCL1 33
#define HAS_GPS 1
#undef GPS_RX_PIN
#undef GPS_TX_PIN
// Use Secondary I2C Bus as GPS Serial
#define GPS_RX_PIN 33
#define GPS_TX_PIN 32
// Green LED
#define LED_INVERTED 0
#define LED_PIN 10
#include "pcf8563.h"
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
#define HAS_RTC 1
// Wheel
// Down 37
// Push 38
// Up 39
// Top Physical Button 5
#define BUTTON_NEED_PULLUP
#define BUTTON_PIN 5
// BUZZER
#define PIN_BUZZER 2
#undef LORA_SCK
#undef LORA_MISO
#undef LORA_MOSI
#undef LORA_CS
#define USE_RF95
// #define USE_SX1280
#ifdef USE_RF95
#define LORA_SCK 18
#define LORA_MISO 34
#define LORA_MOSI 23
#define LORA_CS 14
#define LORA_DIO0 25
#define LORA_RESET 26
#define LORA_DIO1 RADIOLIB_NC
#define LORA_DIO2 RADIOLIB_NC
#endif
#ifdef USE_SX1280
#define LORA_SCK 18
#define LORA_MISO 34
#define LORA_MOSI 23
#define LORA_CS 14
#define LORA_RESET 26
#define LORA_DIO1 25
#define LORA_DIO2 13
#define SX128X_CS LORA_CS
#define SX128X_DIO1 LORA_DIO1
#define SX128X_BUSY LORA_DIO2
#define SX128X_RESET LORA_RESET
#define SX128X_MAX_POWER 13 // 10
#endif
#define USE_EINK
// https://docs.m5stack.com/en/core/coreink
// https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/coreink/coreink_sch.pdf
#define PIN_EINK_EN -1 // N/C
#define PIN_EINK_CS 9 // EPD_CS
#define PIN_EINK_BUSY 4 // EPD_BUSY
#define PIN_EINK_DC 15 // EPD_D/C
#define PIN_EINK_RES -1 // Connected but not needed
#define PIN_EINK_SCLK 18 // EPD_SCLK
#define PIN_EINK_MOSI 23 // EPD_MOSI
#define BATTERY_PIN 35
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
// https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/m5paper/M5_PAPER_SCH.pdf
// https://github.com/m5stack/M5Core-Ink/blob/master/examples/Basics/FactoryTest/FactoryTest.ino#L58
// VBAT
// |
// R83 (3K)
// +
// R86 (11K)
// |
// GND
// https://github.com/m5stack/M5Core-Ink/blob/master/examples/Basics/FactoryTest/FactoryTest.ino#L58
#define ADC_MULTIPLIER 5 // Just a guess for now... more detailed getBatVoltage above
// https://embeddedexplorer.com/esp32-adc-esp-idf-tutorial/